| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170316142922.983457516@linuxfoundation.org>
Date: Thu, 16 Mar 2017 23:30:28 +0900
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Sean Young <sean@...s.org>,
Mauro Carvalho Chehab <mchehab@...pensource.com>
Subject: [PATCH 4.10 44/48] [media] serial_ir: ensure were ready to receive interrupts
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sean Young <sean@...s.org>
commit 0265634eb9e04a16ae99941c320718c38eb865e0 upstream.
When the interrupt requested with devm_request_irq(), serial_ir.rcdev
is still null so will cause null deference if the irq handler is called
early on.
Also ensure that timeout_timer is setup.
Link: http://lkml.kernel.org/r/CA+55aFxsh2uF8gi5sN_guY3Z+tiLv7LpJYKBw+y8vqLzp+TsnQ@mail.gmail.com
[mchehab@...pensource.com: moved serial_ir_probe() back to its original place]
Signed-off-by: Sean Young <sean@...s.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@...pensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/media/rc/serial_ir.c | 115 +++++++++++++++++++++----------------------
1 file changed, 58 insertions(+), 57 deletions(-)
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -471,10 +471,65 @@ static int hardware_init_port(void)
return 0;
}
+/* Needed by serial_ir_probe() */
+static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf,
+ unsigned int count);
+static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle);
+static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier);
+static int serial_ir_open(struct rc_dev *rcdev);
+static void serial_ir_close(struct rc_dev *rcdev);
+
static int serial_ir_probe(struct platform_device *dev)
{
+ struct rc_dev *rcdev;
int i, nlow, nhigh, result;
+ rcdev = devm_rc_allocate_device(&dev->dev);
+ if (!rcdev)
+ return -ENOMEM;
+
+ if (hardware[type].send_pulse && hardware[type].send_space)
+ rcdev->tx_ir = serial_ir_tx;
+ if (hardware[type].set_send_carrier)
+ rcdev->s_tx_carrier = serial_ir_tx_carrier;
+ if (hardware[type].set_duty_cycle)
+ rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
+
+ switch (type) {
+ case IR_HOMEBREW:
+ rcdev->input_name = "Serial IR type home-brew";
+ break;
+ case IR_IRDEO:
+ rcdev->input_name = "Serial IR type IRdeo";
+ break;
+ case IR_IRDEO_REMOTE:
+ rcdev->input_name = "Serial IR type IRdeo remote";
+ break;
+ case IR_ANIMAX:
+ rcdev->input_name = "Serial IR type AnimaX";
+ break;
+ case IR_IGOR:
+ rcdev->input_name = "Serial IR type IgorPlug";
+ break;
+ }
+
+ rcdev->input_phys = KBUILD_MODNAME "/input0";
+ rcdev->input_id.bustype = BUS_HOST;
+ rcdev->input_id.vendor = 0x0001;
+ rcdev->input_id.product = 0x0001;
+ rcdev->input_id.version = 0x0100;
+ rcdev->open = serial_ir_open;
+ rcdev->close = serial_ir_close;
+ rcdev->dev.parent = &serial_ir.pdev->dev;
+ rcdev->driver_type = RC_DRIVER_IR_RAW;
+ rcdev->allowed_protocols = RC_BIT_ALL;
+ rcdev->driver_name = KBUILD_MODNAME;
+ rcdev->map_name = RC_MAP_RC6_MCE;
+ rcdev->timeout = IR_DEFAULT_TIMEOUT;
+ rcdev->rx_resolution = 250000;
+
+ serial_ir.rcdev = rcdev;
+
result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler,
share_irq ? IRQF_SHARED : 0,
KBUILD_MODNAME, &hardware);
@@ -533,7 +588,8 @@ static int serial_ir_probe(struct platfo
sense ? "low" : "high");
dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io);
- return 0;
+
+ return devm_rc_register_device(&dev->dev, rcdev);
}
static int serial_ir_open(struct rc_dev *rcdev)
@@ -704,7 +760,6 @@ static void serial_ir_exit(void)
static int __init serial_ir_init_module(void)
{
- struct rc_dev *rcdev;
int result;
switch (type) {
@@ -735,69 +790,15 @@ static int __init serial_ir_init_module(
sense = !!sense;
result = serial_ir_init();
- if (result)
- return result;
-
- rcdev = devm_rc_allocate_device(&serial_ir.pdev->dev);
- if (!rcdev) {
- result = -ENOMEM;
- goto serial_cleanup;
- }
-
- if (hardware[type].send_pulse && hardware[type].send_space)
- rcdev->tx_ir = serial_ir_tx;
- if (hardware[type].set_send_carrier)
- rcdev->s_tx_carrier = serial_ir_tx_carrier;
- if (hardware[type].set_duty_cycle)
- rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle;
-
- switch (type) {
- case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
- break;
- case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
- break;
- case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
- break;
- case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
- break;
- case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
- break;
- }
-
- rcdev->input_phys = KBUILD_MODNAME "/input0";
- rcdev->input_id.bustype = BUS_HOST;
- rcdev->input_id.vendor = 0x0001;
- rcdev->input_id.product = 0x0001;
- rcdev->input_id.version = 0x0100;
- rcdev->open = serial_ir_open;
- rcdev->close = serial_ir_close;
- rcdev->dev.parent = &serial_ir.pdev->dev;
- rcdev->driver_type = RC_DRIVER_IR_RAW;
- rcdev->allowed_protocols = RC_BIT_ALL;
- rcdev->driver_name = KBUILD_MODNAME;
- rcdev->map_name = RC_MAP_RC6_MCE;
- rcdev->timeout = IR_DEFAULT_TIMEOUT;
- rcdev->rx_resolution = 250000;
-
- serial_ir.rcdev = rcdev;
-
- result = rc_register_device(rcdev);
-
if (!result)
return 0;
-serial_cleanup:
+
serial_ir_exit();
return result;
}
static void __exit serial_ir_exit_module(void)
{
- rc_unregister_device(serial_ir.rcdev);
serial_ir_exit();
}
Powered by blists - more mailing lists