lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <alpine.DEB.2.11.1703162137310.11399@vera100.eng.brocade.com>
Date:   Thu, 16 Mar 2017 21:43:13 -0700 (PDT)
From:   "R. Parameswaran" <parameswaran.r7@...il.com>
To:     netdev@...r.kernel.org
cc:     kleptog@...na.org, jchapman@...alix.com, davem@...hat.com,
        nprachan@...cade.com, rshearma@...cade.com,
        stephen@...workplumber.org, sdietric@...cade.com,
        ciwillia@...cade.com, lboccass@...cade.com, dfawcus@...cade.com,
        bhong@...cade.com, jblunck@...cade.com,
        linux-kernel@...r.kernel.org
Subject: [PATCH net-next v3 2/2]L2TP:Adjust intf MTU, add underlay L3, L2
 hdrs


In existing kernel code, when setting up the L2TP interface, all of the
tunnel encapsulation headers are not taken into account when setting
up the MTU on the  L2TP logical interface device. Due to this, the
packets created by the applications on top of the L2TP layer are larger
than they ought to be, relative to the underlay MTU, which leads to
needless fragmentation once the L2TP packet is encapsulated in an outer IP
packet.

Specifically, the MTU calculation  does not take into account the (outer)
IP header imposed on the encapsulated L2TP packet, and the Layer 2 header
imposed on the inner L2TP packet prior to encapsulation. The patch posted
here takes care of these.

Existing code also seems to assume an Ethernet (non-jumbo) underlay. The
patch uses the PMTU mechanism and the dst entry in the L2TP tunnel socket
to directly pull up the underlay MTU (as the baseline number on top of
which the encapsulation headers are factored in).  Ethernet MTU is
assumed as a fallback only if this fails.

Picked up review comments from James Chapman, added a function
to compute ip header + ip option overhead on a socket, and factored it
into L2TP change-set.

Signed-off-by: R. Parameswaran <rparames@...cade.com>
---
 net/l2tp/l2tp_eth.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 47 insertions(+), 4 deletions(-)

diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index 8bf18a5..f512d97 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -30,6 +30,9 @@
 #include <net/xfrm.h>
 #include <net/net_namespace.h>
 #include <net/netns/generic.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
 
 #include "l2tp_core.h"
 
@@ -204,6 +207,49 @@ static void l2tp_eth_show(struct seq_file *m, void *arg)
 }
 #endif
 
+static void l2tp_eth_adjust_mtu(struct l2tp_tunnel *tunnel,
+				struct l2tp_session *session,
+				struct net_device *dev)
+{
+	unsigned int overhead = 0;
+	struct dst_entry *dst;
+	u32 l3_overhead = 0;
+
+	if (session->mtu != 0) {
+		dev->mtu = session->mtu;
+		dev->needed_headroom += session->hdr_len;
+		if (tunnel->encap == L2TP_ENCAPTYPE_UDP)
+			dev->needed_headroom += sizeof(struct udphdr);
+		return;
+	}
+	overhead = session->hdr_len;
+	l3_overhead = kernel_sock_ip_overhead(tunnel->sock);
+	if (!tunnel->sock || (l3_overhead == 0)) {
+		/* L3 Overhead couldn't be identified, dev mtu stays at 1500 */
+		return;
+	}
+	/* Adjust MTU, factor overhead - underlay L3, overlay L2 hdr */
+	overhead += ETH_HLEN + l3_overhead;
+	/* Additionally, if the encap is UDP, account for UDP header size */
+	if (tunnel->encap == L2TP_ENCAPTYPE_UDP) {
+		overhead += sizeof(struct udphdr);
+		dev->needed_headroom += sizeof(struct udphdr);
+	}
+	/* If PMTU discovery was enabled, use discovered MTU on L2TP device */
+	dst = sk_dst_get(tunnel->sock);
+	if (dst) {
+		/* dst_mtu will use PMTU if found, else fallback to intf MTU */
+		u32 pmtu = dst_mtu(dst);
+
+		if (pmtu != 0)
+			dev->mtu = pmtu;
+		dst_release(dst);
+	}
+	session->mtu = dev->mtu - overhead;
+	dev->mtu = session->mtu;
+	dev->needed_headroom += session->hdr_len;
+}
+
 static int l2tp_eth_create(struct net *net, u32 tunnel_id, u32 session_id, u32 peer_session_id, struct l2tp_session_cfg *cfg)
 {
 	struct net_device *dev;
@@ -253,12 +299,9 @@ static int l2tp_eth_create(struct net *net, u32 tunnel_id, u32 session_id, u32 p
 	}
 
 	dev_net_set(dev, net);
-	if (session->mtu == 0)
-		session->mtu = dev->mtu - session->hdr_len;
-	dev->mtu = session->mtu;
-	dev->needed_headroom += session->hdr_len;
 	dev->min_mtu = 0;
 	dev->max_mtu = ETH_MAX_MTU;
+	l2tp_eth_adjust_mtu(tunnel, session, dev);
 
 	priv = netdev_priv(dev);
 	priv->dev = dev;
-- 
2.1.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ