[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1489799633-29278-1-git-send-email-sergio.prado@e-labworks.com>
Date: Fri, 17 Mar 2017 22:13:51 -0300
From: Sergio Prado <sergio.prado@...abworks.com>
To: ulf.hansson@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ben-linux@...ff.org,
linux-arm-kernel@...ts.infradead.org
Cc: Sergio Prado <sergio.prado@...abworks.com>
Subject: [PATCH v5 0/2] mmc: host: s3cmci: add device tree support
This series adds support for configuring Samsung's S3C24XX MMC/SD/SDIO
controller via device tree.
Tested on FriendlyARM mini2440, based on s3c2440 SoC.
Changes since v4 (as suggested by Jaehoon Chung):
- using just a flag as a data structure for the driver to check for
s3c2400 compatibility
Changes since v3 (as suggested by Rob Herring):
- describing properties that wasn't documented and removing unnecessary
comment in the device tree binding
Changes since v2:
- struct "s3cmci_drv_data" and flag "is2440" renamed
- copying the whole driver data struct instead of only its member so
it will be easier to extend the information in the future
- using mmc_of_parse() to read "cd-gpios" and "wp-gpios" properties
from device tree
Changes since v1:
- pinctrl description removed from DT binding
- unit and label on DT binding renamed to mmc
Sergio Prado (2):
dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
mmc: host: s3cmci: allow probing from device tree
.../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++
drivers/mmc/host/s3cmci.c | 257 ++++++++++-----------
2 files changed, 168 insertions(+), 131 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
--
1.9.1
Powered by blists - more mailing lists