| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Mar 2017 10:01:19 -0400
From: Mike Rapoport <rppt@...ux.vnet.ibm.com>
To: "Michael Kerrisk (man-pages)" <mtk.manpages@...il.com>
Cc: Andrea Arcangeli <aarcange@...hat.com>,
lkml <linux-kernel@...r.kernel.org>,
"linux-mm@...ck.org" <linux-mm@...ck.org>,
linux-man <linux-man@...r.kernel.org>
Subject: Re: Review request: draft userfaultfd(2) manual page
Hello Michael,
On Mon, Mar 20, 2017 at 09:08:05PM +0100, Michael Kerrisk (man-pages) wrote:
> Hello Andrea, Mike, and all,
>
> Mike: thanks for the page that you sent. I've reworked it
> a bit, and also added a lot of further information,
> and an example program. In the process, I split the page
> into two pieces, with one piece describing the userfaultfd()
> system call and the other describing the ioctl() operations.
>
> I'd like to get review input, especially from you and
> Andrea, but also anyone else, for the current version
> of this page, which includes a few FIXMEs to be sorted.
Thanks for the update. I'm adressing the FIXME points you've mentioned
below.
Otherwise, everything seems the right description of the current upstream.
4.11 will have quite a few updates to userfault and we'll need to udpate
this page and ioctl_userfaultfd(2) to address those updates. I am planning
to work on the man update in the next few weeks.
> I've shown the rendered version of the page below.
> The groff source is attached, and can also be found
> at the branch here:
> https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/log/?h=draft_userfaultfd
>
> The new ioctl_userfaultfd(2) page follows this mail.
>
> Cheers,
>
> Michael
--
Sincerely yours,
Mike.
> USERFAULTFD(2) Linux Programmer's Manual USERFAULTFD(2)
>
> ┌─────────────────────────────────────────────────────┐
> │FIXME │
> ├─────────────────────────────────────────────────────┤
> │Need to describe close(2) semantics for userfaulfd │
> │file descriptor: what happens when the userfaultfd │
> │FD is closed? │
> │ │
> └─────────────────────────────────────────────────────┘
When userfaultfd is closed, it unregisters all memory ranges that were
previously registered with it and flushes the outstanding page fault
events.
> NAME
> userfaultfd - create a file descriptor for handling page faults
> in user space
>
> SYNOPSIS
> #include <sys/types.h>
> #include <linux/userfaultfd.h>
>
> int userfaultfd(int flags);
>
> Note: There is no glibc wrapper for this system call; see
> NOTES.
>
> DESCRIPTION
> userfaultfd() creates a new userfaultfd object that can be used
> for delegation of page-fault handling to a user-space applica‐
> tion, and returns a file descriptor that refers to the new
> object. The new userfaultfd object is configured using
> ioctl(2).
>
> Once the userfaultfd object is configured, the application can
> use read(2) to receive userfaultfd notifications. The reads
> from userfaultfd may be blocking or non-blocking, depending on
> the value of flags used for the creation of the userfaultfd or
> subsequent calls to fcntl(2).
>
> The following values may be bitwise ORed in flags to change the
> behavior of userfaultfd():
>
> O_CLOEXEC
> Enable the close-on-exec flag for the new userfaultfd
> file descriptor. See the description of the O_CLOEXEC
> flag in open(2).
>
> O_NONBLOCK
> Enables non-blocking operation for the userfaultfd
> object. See the description of the O_NONBLOCK flag in
> open(2).
>
> Usage
> The userfaultfd mechanism is designed to allow a thread in a
> multithreaded program to perform user-space paging for the
> other threads in the process. When a page fault occurs for one
> of the regions registered to the userfaultfd object, the fault‐
> ing thread is put to sleep and an event is generated that can
> be read via the userfaultfd file descriptor. The fault-han‐
> dling thread reads events from this file descriptor and ser‐
> vices them using the operations described in ioctl_user‐
> faultfd(2). When servicing the page fault events, the fault-
> handling thread can trigger a wake-up for the sleeping thread.
>
> Userfaultfd operation
> After the userfaultfd object is created with userfaultfd(), the
> application must enable it using the UFFDIO_API ioctl(2) opera‐
> tion. This operation allows a handshake between the kernel and
> user space to determine the API version and supported features.
> This operation must be performed before any of the other
> ioctl(2) operations described below (or those operations fail
> with the EINVAL error).
>
> After a successful UFFDIO_API operation, the application then
> registers memory address ranges using the UFFDIO_REGISTER
> ioctl(2) operation. After successful completion of a UFF‐
> DIO_REGISTER operation, a page fault occurring in the requested
> memory range, and satisfying the mode defined at the registra‐
> tion time, will be forwarded by the kernel to the user-space
> application. The application can then use the UFFDIO_COPY or
> UFFDIO_ZERO ioctl(2) operations to resolve the page fault.
>
> Details of the various ioctl(2) operations can be found in
> ioctl_userfaultfd(2).
>
> Currently, userfaultfd can be used only with anonymous private
> memory mappings.
>
> Reading from the userfaultfd structure
> ┌─────────────────────────────────────────────────────┐
> │FIXME │
> ├─────────────────────────────────────────────────────┤
> │are the details below correct? │
> └─────────────────────────────────────────────────────┘
Yes, at least for the current upstream version. 4.11 will have quite a few
updates to userfaultfd.
> Each read(2) from the userfaultfd file descriptor returns one
> or more uffd_msg structures, each of which describes a page-
> fault event:
>
> struct uffd_msg {
> __u8 event; /* Type of event */
> ...
> union {
> struct {
> __u64 flags; /* Flags describing fault */
> __u64 address; /* Faulting address */
> } pagefault;
> ...
> } arg;
>
> /* Padding fields omitted */
> } __packed;
>
> If multiple events are available and the supplied buffer is
> large enough, read(2) returns as many events as will fit in the
> supplied buffer. If the buffer supplied to read(2) is smaller
> than the size of the uffd_msg structure, the read(2) fails with
> the error EINVAL.
>
> The fields set in the uffd_msg structure are as follows:
>
> event The type of event. Currently, only one value can appear
> in this field: UFFD_EVENT_PAGEFAULT, which indicates a
> page-fault event.
>
> address
> The address that triggered the page fault.
>
> flags A bit mask of flags that describe the event. For
> UFFD_EVENT_PAGEFAULT, the following flag may appear:
>
> UFFD_PAGEFAULT_FLAG_WRITE
> If the address is in a range that was registered
> with the UFFDIO_REGISTER_MODE_MISSING flag (see
> ioctl_userfaultfd(2)) and this flag is set, this
> a write fault; otherwise it is a read fault.
>
> A read(2) on a userfaultfd file descriptor can fail with the
> following errors:
>
> EINVAL The userfaultfd object has not yet been enabled using
> the UFFDIO_API ioctl(2) operation
>
> The userfaultfd file descriptor can be monitored with poll(2),
> select(2), and epoll(7). When events are available, the file
> descriptor indicates as readable.
>
>
> ┌─────────────────────────────────────────────────────┐
> │FIXME │
> ├─────────────────────────────────────────────────────┤
> │But, it seems, the object must be created with │
> │O_NONBLOCK. What is the rationale for this require‐ │
> │ment? Something needs to be said in this manual │
> │page. │
> └─────────────────────────────────────────────────────┘
The object can be created without O_NONBLOCK, so probably the above
sentence can be rephrased as:
When the userfaultfd file descriptor is opened in non-blocking mode, it can
be monitored with ...
> RETURN VALUE
> On success, userfaultfd() returns a new file descriptor that
> refers to the userfaultfd object. On error, -1 is returned,
> and errno is set appropriately.
>
> ERRORS
> EINVAL An unsupported value was specified in flags.
>
> EMFILE The per-process limit on the number of open file
> descriptors has been reached
>
> ENFILE The system-wide limit on the total number of open files
> has been reached.
>
> ENOMEM Insufficient kernel memory was available.
>
> VERSIONS
> The userfaultfd() system call first appeared in Linux 4.3.
>
> CONFORMING TO
> userfaultfd() is Linux-specific and should not be used in pro‐
> grams intended to be portable.
>
> NOTES
> Glibc does not provide a wrapper for this system call; call it
> using syscall(2).
>
> The userfaultfd mechanism can be used as an alternative to tra‐
> ditional user-space paging techniques based on the use of the
> SIGSEGV signal and mmap(2). It can also be used to implement
> lazy restore for checkpoint/restore mechanisms, as well as
> post-copy migration to allow (nearly) uninterrupted execution
> when transferring virtual machines from one host to another.
>
> EXAMPLE
> The program below demonstrates the use of the userfaultfd mech‐
> anism. The program creates two threads, one of which acts as
> the page-fault handler for the process, for the pages in a
> demand-page zero region created using mmap(2).
>
> The program takes one command-line argument, which is the num‐
> ber of pages that will be created in a mapping whose page
> faults will be handled via userfaultfd. After creating a user‐
> faultfd object, the program then creates an anonymous private
> mapping of the specified size and registers the address range
> of that mapping using the UFFDIO_REGISTER ioctl(2) operation.
> The program then creates a second thread that will perform the
> task of handling page faults.
>
> The main thread then walks through the pages of the mapping
> fetching bytes from successive pages. Because the pages have
> not yet been accessed, the first access of a byte in each page
> will trigger a page-fault event on the userfaultfd file
> descriptor.
>
> Each of the page-fault events is handled by the second thread,
> which sits in a loop processing input from the userfaultfd file
> descriptor. In each loop iteration, the second thread first
> calls poll(2) to check the state of the file descriptor, and
> then reads an event from the file descriptor. All such events
> should be UFFD_EVENT_PAGEFAULT events, which the thread handles
> by copying a page of data into the faulting region using the
> UFFDIO_COPY ioctl(2) operation.
>
> The following is an example of what we see when running the
> program:
>
> $ ./userfaultfd_demo 3
> Address returned by mmap() = 0x7fd30106c000
>
> fault_handler_thread():
> poll() returns: nready = 1; POLLIN = 1; POLLERR = 0
> UFFD_EVENT_PAGEFAULT event: flags = 0; address = 7fd30106c00f
> (uffdio_copy.copy returned 4096)
> Read address 0x7fd30106c00f in main(): A
> Read address 0x7fd30106c40f in main(): A
> Read address 0x7fd30106c80f in main(): A
> Read address 0x7fd30106cc0f in main(): A
>
> fault_handler_thread():
> poll() returns: nready = 1; POLLIN = 1; POLLERR = 0
> UFFD_EVENT_PAGEFAULT event: flags = 0; address = 7fd30106d00f
> (uffdio_copy.copy returned 4096)
> Read address 0x7fd30106d00f in main(): B
> Read address 0x7fd30106d40f in main(): B
> Read address 0x7fd30106d80f in main(): B
> Read address 0x7fd30106dc0f in main(): B
>
> fault_handler_thread():
> poll() returns: nready = 1; POLLIN = 1; POLLERR = 0
> UFFD_EVENT_PAGEFAULT event: flags = 0; address = 7fd30106e00f
> (uffdio_copy.copy returned 4096)
> Read address 0x7fd30106e00f in main(): C
> Read address 0x7fd30106e40f in main(): C
> Read address 0x7fd30106e80f in main(): C
> Read address 0x7fd30106ec0f in main(): C
>
> Program source
>
> /* userfaultfd_demo.c
>
> Licensed under the GNU General Public License version 2 or later.
> */
> #define _GNU_SOURCE
> #include <sys/types.h>
> #include <stdio.h>
> #include <linux/userfaultfd.h>
> #include <pthread.h>
> #include <errno.h>
> #include <unistd.h>
> #include <stdlib.h>
> #include <fcntl.h>
> #include <signal.h>
> #include <poll.h>
> #include <string.h>
> #include <sys/mman.h>
> #include <sys/syscall.h>
> #include <sys/ioctl.h>
> #include <poll.h>
>
> #define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
> } while (0)
>
> static int page_size;
>
> static void *
> fault_handler_thread(void *arg)
> {
> static struct uffd_msg msg; /* Data read from userfaultfd */
> static int fault_cnt = 0; /* Number of faults so far handled */
> long uffd; /* userfaultfd file descriptor */
> static char *page = NULL;
> struct uffdio_copy uffdio_copy;
> ssize_t nread;
>
> uffd = (long) arg;
>
> /* Create a page that will be copied into the faulting region */
>
> if (page == NULL) {
> page = mmap(NULL, page_size, PROT_READ | PROT_WRITE,
> MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
> if (page == MAP_FAILED)
> errExit("mmap");
> }
>
> /* Loop, handling incoming events on the userfaultfd
> file descriptor */
>
> for (;;) {
>
> /* See what poll() tells us about the userfaultfd */
>
> struct pollfd pollfd;
> int nready;
> pollfd.fd = uffd;
> pollfd.events = POLLIN;
> nready = poll(&pollfd, 1, -1);
> if (nready == -1)
> errExit("poll");
>
> printf("\nfault_handler_thread():\n");
> printf(" poll() returns: nready = %d; "
> "POLLIN = %d; POLLERR = %d\n", nready,
> (pollfd.revents & POLLIN) != 0,
> (pollfd.revents & POLLERR) != 0);
>
> /* Read an event from the userfaultfd */
>
> nread = read(uffd, &msg, sizeof(msg));
> if (nread == 0) {
> printf("EOF on userfaultfd!\n");
> exit(EXIT_FAILURE);
> }
>
> if (nread == -1)
> errExit("read");
>
> /* We expect only one kind of event; verify that assumption */
>
> if (msg.event != UFFD_EVENT_PAGEFAULT) {
> fprintf(stderr, "Unexpected event on userfaultfd\n");
> exit(EXIT_FAILURE);
> }
>
> /* Display info about the page-fault event */
>
> printf(" UFFD_EVENT_PAGEFAULT event: ");
> printf("flags = %llx; ", msg.arg.pagefault.flags);
> printf("address = %llx\n", msg.arg.pagefault.address);
>
> /* Copy the page pointed to by 'page' into the faulting
> region. Vary the contents that are copied in, so that it
> is more obvious that each fault is handled separately. */
>
> memset(page, 'A' + fault_cnt % 20, page_size);
> fault_cnt++;
>
> uffdio_copy.src = (unsigned long) page;
>
> /* We need to handle page faults in units of pages(!).
> So, round faulting address down to page boundary */
>
> uffdio_copy.dst = (unsigned long) msg.arg.pagefault.address &
> ~(page_size - 1);
> uffdio_copy.len = page_size;
> uffdio_copy.mode = 0;
> uffdio_copy.copy = 0;
> if (ioctl(uffd, UFFDIO_COPY, &uffdio_copy) == -1)
> errExit("ioctl-UFFDIO_COPY");
>
> printf(" (uffdio_copy.copy returned %lld)\n",
> uffdio_copy.copy);
> }
> }
>
> int
> main(int argc, char *argv[])
> {
> long uffd; /* userfaultfd file descriptor */
> char *addr; /* Start of region handled by userfaultfd */
> unsigned long len; /* Length of region handled by userfaultfd */
> pthread_t thr; /* ID of thread that handles page faults */
> struct uffdio_api uffdio_api;
> struct uffdio_register uffdio_register;
> int s;
>
> if (argc != 2) {
> fprintf(stderr, "Usage: %s num-pages\n", argv[0]);
> exit(EXIT_FAILURE);
> }
>
> page_size = sysconf(_SC_PAGE_SIZE);
> len = strtoul(argv[1], NULL, 0) * page_size;
>
> /* Create and enable userfaultfd object */
>
> uffd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK);
> if (uffd == -1)
> errExit("userfaultfd");
>
> uffdio_api.api = UFFD_API;
> uffdio_api.features = 0;
> if (ioctl(uffd, UFFDIO_API, &uffdio_api) == -1)
> errExit("ioctl-UFFDIO_API");
>
> /* Create a private anonymous mapping. The memory will be
> demand-zero paged--that is, not yet allocated. When we
> actually touch the memory, it will be allocated via
> the userfaultfd. */
>
> addr = mmap(NULL, len, PROT_READ | PROT_WRITE,
> MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
> if (addr == MAP_FAILED)
> errExit("mmap");
>
> printf("Address returned by mmap() = %p\n", addr);
>
> /* Register the memory range of the mapping we just created for
> handling by the userfaultfd object. In mode, we request to track
> missing pages (i.e., pages that have not yet been faulted in). */
>
> uffdio_register.range.start = (unsigned long) addr;
> uffdio_register.range.len = len;
> uffdio_register.mode = UFFDIO_REGISTER_MODE_MISSING;
> if (ioctl(uffd, UFFDIO_REGISTER, &uffdio_register) == -1)
> errExit("ioctl-UFFDIO_REGISTER");
>
> /* Create a thread that will process the userfaultfd events */
>
> s = pthread_create(&thr, NULL, fault_handler_thread, (void *) uffd);
> if (s != 0) {
> errno = s;
> errExit("pthread_create");
> }
>
> /* Main thread now touches memory in the mapping, touching
> locations 1024 bytes apart. This will trigger userfaultfd
> events for all pages in the region. */
>
> int l;
> l = 0xf; /* Ensure that faulting address is not on a page
> boundary, in order to test that we correctly
> handle that case in fault_handling_thread() */
> while (l < len) {
> char c = addr[l];
> printf("Read address %p in main(): ", addr + l);
> printf("%c\n", c);
> l += 1024;
> usleep(100000); /* Slow things down a little */
> }
>
> exit(EXIT_SUCCESS);
> }
>
> SEE ALSO
> fcntl(2), ioctl(2), ioctl_userfaultfd(2), madvise(2), mmap(2)
>
> Documentation/vm/userfaultfd.txt in the Linux kernel source
> tree
>
>
> --
> Michael Kerrisk
> Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
> Linux/UNIX System Programming Training: http://man7.org/training/
Powered by blists - more mailing lists