lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Mar 2017 19:28:36 +0100 From: Gregory CLEMENT <gregory.clement@...e-electrons.com> To: Linus Walleij <linus.walleij@...aro.org>, linux-gpio@...r.kernel.org Cc: Jason Cooper <jason@...edaemon.net>, Andrew Lunn <andrew@...n.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>, Gregory CLEMENT <gregory.clement@...e-electrons.com>, Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>, linux-arm-kernel@...ts.infradead.org, Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, Nadav Haklai <nadavh@...vell.com>, Victor Gu <xigu@...vell.com>, Marcin Wojtas <mw@...ihalf.com>, Wilson Ding <dingwei@...vell.com>, Hua Jing <jinghua@...vell.com>, Neta Zur Hershkovits <neta@...vell.com> Subject: [PATCH v2 7/7] ARM64: dts: marvell: armada37xx: add pinctrl definition Start to populate the device tree of the Armada 37xx with the pincontrol configuration used on the board providing a dts. Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com> --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +++++- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 31 +++++++++++++++++++- 2 files changed, 39 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 86602c907a61..e749c5727490 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -63,6 +63,8 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -73,6 +75,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; m25p80@0 { compatible = "jedec,spi-nor"; @@ -103,6 +107,8 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; }; @@ -128,6 +134,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; phy = <&phy0>; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 229946c57a07..dbc842d9310f 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -185,6 +185,31 @@ clock-output-names = "xtal"; #clock-cells = <0>; }; + + spi_quad_pins: spi-quad-pins { + groups = "spi_quad"; + function = "spi"; + }; + + i2c1_pins: i2c1-pins { + groups = "i2c1"; + function = "i2c"; + }; + + i2c2_pins: i2c2-pins { + groups = "i2c2"; + function = "i2c"; + }; + + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart"; + }; }; pinctrl_sb: pinctrl-sb@...00 { @@ -201,6 +226,12 @@ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; }; + + rgmii_pins: mii-pins { + groups = "rgmii"; + function = "mii"; + }; + }; eth0: ethernet@...00 { -- git-series 0.9.1
Powered by blists - more mailing lists