| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1490129479-19459-1-git-send-email-jon.mason@broadcom.com>
Date: Tue, 21 Mar 2017 16:51:19 -0400
From: Jon Mason <jon.mason@...adcom.com>
To: Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com
Subject: [PATCH] arm64: dts: NS2: Add dma-coherent to relevant DT entries
Cache related issues with DMA rings and performance issues related to
caching are being caused by not properly setting the "dma-coherent" flag
in the device tree entries. Adding it here to correct the issue.
Signed-off-by: Jon Mason <jon.mason@...adcom.com>
Fixes: fd5e5dd56 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2")
Fixes: dddc3c9d7 ("arm64: dts: NS2: add AMAC ethernet support")
Fixes: e79249143 ("arm64: dts: Add Broadcom Northstar2 device tree entries for PDC driver")
Fixes: ac9aae00f ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Fixes: efc877676 ("arm64: dts: Add SDHCI DT node for NS2")
---
arch/arm64/boot/dts/broadcom/ns2.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index b8503fc..35a309a 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -114,6 +114,7 @@
pcie0: pcie@...20000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x20020000 0 0x1000>;
+ dma-coherent;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
@@ -144,6 +145,7 @@
pcie4: pcie@...20000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x50020000 0 0x1000>;
+ dma-coherent;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
@@ -174,6 +176,7 @@
pcie8: pcie@...00000 {
compatible = "brcm,iproc-pcie-paxc";
reg = <0 0x60c00000 0 0x1000>;
+ dma-coherent;
linux,pci-domain = <8>;
bus-range = <0x0 0x1>;
@@ -203,6 +206,7 @@
<0x61030000 0x100>;
reg-names = "amac_base", "idm_base", "nicpm_base";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
phy-handle = <&gphy0>;
phy-mode = "rgmii";
status = "disabled";
@@ -213,6 +217,7 @@
reg = <0x612c0000 0x445>; /* PDC FS0 regs */
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
@@ -228,6 +233,7 @@
reg = <0x612e0000 0x445>; /* PDC FS1 regs */
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
@@ -243,6 +249,7 @@
reg = <0x61300000 0x445>; /* PDC FS2 regs */
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
@@ -258,6 +265,7 @@
reg = <0x61320000 0x445>; /* PDC FS3 regs */
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
@@ -668,6 +676,7 @@
sata: ahci@...f2000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x663f2000 0x1000>;
+ dma-coherent;
reg-names = "ahci";
interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -691,6 +700,7 @@
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66420000 0x100>;
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
@@ -700,6 +710,7 @@
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66430000 0x100>;
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
--
2.7.4
Powered by blists - more mailing lists