[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170322171052.7006-3-tony@atomide.com>
Date: Wed, 22 Mar 2017 10:10:50 -0700
From: Tony Lindgren <tony@...mide.com>
To: Mark Brown <broonie@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>,
Lee Jones <lee.jones@...aro.org>,
Marcel Partap <mpartap@....net>,
Michael Scott <michael.scott@...aro.org>
Subject: [PATCH 2/4] mfd: cpcap: Use handle_reread flag for interrupts
On CPCAP we need to keep reading interrupts until there are no
more interrupts. Otherwise the PMIC interrupt to the SoC will at
some point stop toggling. This seems to happen because new CPCAP
device interrupts show up while we're handling.
Cc: Charles Keepax <ckeepax@...nsource.wolfsonmicro.com>
Cc: Lee Jones <lee.jones@...aro.org>
Cc: Marcel Partap <mpartap@....net>
Cc: Michael Scott <michael.scott@...aro.org>
Tested-by: Sebastian Reichel <sre@...nel.org>
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
drivers/mfd/motorola-cpcap.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
--- a/drivers/mfd/motorola-cpcap.c
+++ b/drivers/mfd/motorola-cpcap.c
@@ -71,6 +71,7 @@ static struct regmap_irq_chip cpcap_irq_chip[CPCAP_NR_IRQ_CHIPS] = {
.ack_base = CPCAP_REG_MI1,
.mask_base = CPCAP_REG_MIM1,
.use_ack = true,
+ .handle_reread = true,
},
{
.name = "cpcap-m2",
@@ -79,6 +80,7 @@ static struct regmap_irq_chip cpcap_irq_chip[CPCAP_NR_IRQ_CHIPS] = {
.ack_base = CPCAP_REG_MI2,
.mask_base = CPCAP_REG_MIM2,
.use_ack = true,
+ .handle_reread = true,
},
{
.name = "cpcap1-4",
@@ -88,6 +90,7 @@ static struct regmap_irq_chip cpcap_irq_chip[CPCAP_NR_IRQ_CHIPS] = {
.mask_base = CPCAP_REG_INTM1,
.type_base = CPCAP_REG_INTS1,
.use_ack = true,
+ .handle_reread = true,
},
};
--
2.11.1
Powered by blists - more mailing lists