[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1490213273-8571-14-git-send-email-yamada.masahiro@socionext.com>
Date: Thu, 23 Mar 2017 05:07:12 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-mtd@...ts.infradead.org
Cc: laurent.monat@...uantique.com,
thorsten.christiansson@...uantique.com,
Enrico Jorns <ejo@...gutronix.de>,
Artem Bityutskiy <artem.bityutskiy@...ux.intel.com>,
Dinh Nguyen <dinguyen@...nel.org>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Marek Vasut <marek.vasut@...il.com>,
Graham Moore <grmoore@...nsource.altera.com>,
David Woodhouse <dwmw2@...radead.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
Chuanxiao Dong <chuanxiao.dong@...el.com>,
Jassi Brar <jaswinder.singh@...aro.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Brian Norris <computersforpeace@...il.com>,
Richard Weinberger <richard@....at>,
Cyrille Pitchen <cyrille.pitchen@...el.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Subject: [RESEND PATCH v2 13/53] mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
There are various customizable parameters, so several variants for
this IP. A generic compatible like "denali,denali-nand-dt" is
useless. Moreover, there are multiple things wrong with this string.
(Refer to Rob's comment [1])
The denali_dt.c was split out and this compatible was added by Altera
for the SOCFPGA port. So, replace it with a more specific string.
The Denali IP on SOCFPGA incorporates the hardware ECC fixup feature.
So, this capability should be associated with the compatible string.
[1] https://lkml.org/lkml/2016/12/1/450
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Changes in v2:
- Add caps flag to of_device_id data, not hard-code in driver code
- Add Altera-specific compatible.
Documentation/devicetree/bindings/mtd/denali-nand.txt | 5 +++--
drivers/mtd/nand/denali_dt.c | 14 ++++++++++----
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index b04d03a..6f4ab4c 100644
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -1,7 +1,8 @@
* Denali NAND controller
Required properties:
- - compatible : should be "denali,denali-nand-dt"
+ - compatible : should be one of the following:
+ "altr,socfpga-denali-nand" - for Altera SOCFPGA
- reg : should contain registers location and length for data and reg.
- reg-names: Should contain the reg names "nand_data" and "denali_reg"
- interrupts : The interrupt number.
@@ -15,7 +16,7 @@ Examples:
nand: nand@...00000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "denali,denali-nand-dt";
+ compatible = "altr,socfpga-denali-nand";
reg = <0xff900000 0x100000>, <0xffb80000 0x10000>;
reg-names = "nand_data", "denali_reg";
interrupts = <0 144 4>;
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index 293ddb8..9577bfd 100644
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -33,11 +33,17 @@ struct denali_dt_data {
unsigned int caps;
};
-static const struct of_device_id denali_nand_dt_ids[] = {
- { .compatible = "denali,denali-nand-dt" },
- { /* sentinel */ }
- };
+static const struct denali_dt_data denali_socfpga_data = {
+ .caps = DENALI_CAP_HW_ECC_FIXUP,
+};
+static const struct of_device_id denali_nand_dt_ids[] = {
+ {
+ .compatible = "altr,socfpga-denali-nand",
+ .data = &denali_socfpga_data,
+ },
+ { /* sentinel */ }
+};
MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
static u64 denali_dma_mask;
--
2.7.4
Powered by blists - more mailing lists