[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1490213273-8571-25-git-send-email-yamada.masahiro@socionext.com>
Date: Thu, 23 Mar 2017 05:07:23 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-mtd@...ts.infradead.org
Cc: laurent.monat@...uantique.com,
thorsten.christiansson@...uantique.com,
Enrico Jorns <ejo@...gutronix.de>,
Artem Bityutskiy <artem.bityutskiy@...ux.intel.com>,
Dinh Nguyen <dinguyen@...nel.org>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Marek Vasut <marek.vasut@...il.com>,
Graham Moore <grmoore@...nsource.altera.com>,
David Woodhouse <dwmw2@...radead.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
Chuanxiao Dong <chuanxiao.dong@...el.com>,
Jassi Brar <jaswinder.singh@...aro.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
linux-kernel@...r.kernel.org,
Brian Norris <computersforpeace@...il.com>,
Richard Weinberger <richard@....at>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [RESEND PATCH v2 24/53] mtd: nand: denali: remove meaningless writes to read-only registers
The write accesses to LOGICAL_PAGE_{DATA,SPARE}_SIZE have no effect
because the Denali User's Guide says these registers are read-only.
The hardware automatically multiplies the main/spare size by the
number of devices and update LOGICAL_PAGE_{DATA,SPARE}_SIZE.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Changes in v2: None
drivers/mtd/nand/denali.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 3da0a0e..5e89709 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -342,8 +342,6 @@ static void get_samsung_nand_para(struct denali_nand_info *denali,
static void get_toshiba_nand_para(struct denali_nand_info *denali)
{
- uint32_t tmp;
-
/*
* Workaround to fix a controller bug which reports a wrong
* spare area size for some kind of Toshiba NAND device
@@ -351,10 +349,6 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
(ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
- ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- iowrite32(tmp,
- denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
#if SUPPORT_15BITECC
iowrite32(15, denali->flash_reg + ECC_CORRECTION);
#elif SUPPORT_8BITECC
@@ -366,22 +360,12 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
static void get_hynix_nand_para(struct denali_nand_info *denali,
uint8_t device_id)
{
- uint32_t main_size, spare_size;
-
switch (device_id) {
case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK);
iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
- main_size = 4096 *
- ioread32(denali->flash_reg + DEVICES_CONNECTED);
- spare_size = 224 *
- ioread32(denali->flash_reg + DEVICES_CONNECTED);
- iowrite32(main_size,
- denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
- iowrite32(spare_size,
- denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
iowrite32(0, denali->flash_reg + DEVICE_WIDTH);
#if SUPPORT_15BITECC
iowrite32(15, denali->flash_reg + ECC_CORRECTION);
--
2.7.4
Powered by blists - more mailing lists