| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1490213273-8571-19-git-send-email-yamada.masahiro@socionext.com>
Date: Thu, 23 Mar 2017 05:07:17 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-mtd@...ts.infradead.org
Cc: laurent.monat@...uantique.com,
thorsten.christiansson@...uantique.com,
Enrico Jorns <ejo@...gutronix.de>,
Artem Bityutskiy <artem.bityutskiy@...ux.intel.com>,
Dinh Nguyen <dinguyen@...nel.org>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Marek Vasut <marek.vasut@...il.com>,
Graham Moore <grmoore@...nsource.altera.com>,
David Woodhouse <dwmw2@...radead.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
Chuanxiao Dong <chuanxiao.dong@...el.com>,
Jassi Brar <jaswinder.singh@...aro.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
linux-kernel@...r.kernel.org,
Brian Norris <computersforpeace@...il.com>,
Richard Weinberger <richard@....at>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [RESEND PATCH v2 18/53] mtd: nand: denali: use nand_chip to hold frequently accessed data
The denali_init() needs to setup a bunch of parameters of nand_chip.
Replace denali->nand.(member) with chip->(member) for shorter code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Changes in v2: None
drivers/mtd/nand/denali.c | 68 +++++++++++++++++++++++------------------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index ff6af1d..24c35a6 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1460,7 +1460,8 @@ static void denali_drv_init(struct denali_nand_info *denali)
int denali_init(struct denali_nand_info *denali)
{
- struct mtd_info *mtd = nand_to_mtd(&denali->nand);
+ struct nand_chip *chip = &denali->nand;
+ struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
if (denali->platform == INTEL_CE4100) {
@@ -1497,10 +1498,10 @@ int denali_init(struct denali_nand_info *denali)
mtd->name = "denali-nand";
/* register the driver with the NAND core subsystem */
- denali->nand.select_chip = denali_select_chip;
- denali->nand.cmdfunc = denali_cmdfunc;
- denali->nand.read_byte = denali_read_byte;
- denali->nand.waitfunc = denali_waitfunc;
+ chip->select_chip = denali_select_chip;
+ chip->cmdfunc = denali_cmdfunc;
+ chip->read_byte = denali_read_byte;
+ chip->waitfunc = denali_waitfunc;
/*
* scan for NAND devices attached to the controller
@@ -1544,17 +1545,16 @@ int denali_init(struct denali_nand_info *denali)
* the real pagesize and anything necessery
*/
denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
- denali->nand.chipsize <<= denali->devnum - 1;
- denali->nand.page_shift += denali->devnum - 1;
- denali->nand.pagemask = (denali->nand.chipsize >>
- denali->nand.page_shift) - 1;
- denali->nand.bbt_erase_shift += denali->devnum - 1;
- denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift;
- denali->nand.chip_shift += denali->devnum - 1;
+ chip->chipsize <<= denali->devnum - 1;
+ chip->page_shift += denali->devnum - 1;
+ chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+ chip->bbt_erase_shift += denali->devnum - 1;
+ chip->phys_erase_shift = chip->bbt_erase_shift;
+ chip->chip_shift += denali->devnum - 1;
mtd->writesize <<= denali->devnum - 1;
mtd->oobsize <<= denali->devnum - 1;
mtd->erasesize <<= denali->devnum - 1;
- mtd->size = denali->nand.numchips * denali->nand.chipsize;
+ mtd->size = chip->numchips * chip->chipsize;
denali->bbtskipbytes *= denali->devnum;
/*
@@ -1564,29 +1564,29 @@ int denali_init(struct denali_nand_info *denali)
*/
/* Bad block management */
- denali->nand.bbt_td = &bbt_main_descr;
- denali->nand.bbt_md = &bbt_mirror_descr;
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
/* skip the scan for now until we have OOB read and write support */
- denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
- denali->nand.options |= NAND_SKIP_BBTSCAN;
- denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ chip->ecc.mode = NAND_ECC_HW_SYNDROME;
/* no subpage writes on denali */
- denali->nand.options |= NAND_NO_SUBPAGE_WRITE;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
/*
* Denali Controller only support 15bit and 8bit ECC in MRST,
* so just let controller do 15bit ECC for MLC and 8bit ECC for
* SLC if possible.
* */
- if (!nand_is_slc(&denali->nand) &&
+ if (!nand_is_slc(chip) &&
(mtd->oobsize > (denali->bbtskipbytes +
ECC_15BITS * (mtd->writesize /
ECC_SECTOR_SIZE)))) {
/* if MLC OOB size is large enough, use 15bit ECC*/
- denali->nand.ecc.strength = 15;
- denali->nand.ecc.bytes = ECC_15BITS;
+ chip->ecc.strength = 15;
+ chip->ecc.bytes = ECC_15BITS;
iowrite32(15, denali->flash_reg + ECC_CORRECTION);
} else if (mtd->oobsize < (denali->bbtskipbytes +
ECC_8BITS * (mtd->writesize /
@@ -1594,24 +1594,24 @@ int denali_init(struct denali_nand_info *denali)
pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes");
goto failed_req_irq;
} else {
- denali->nand.ecc.strength = 8;
- denali->nand.ecc.bytes = ECC_8BITS;
+ chip->ecc.strength = 8;
+ chip->ecc.bytes = ECC_8BITS;
iowrite32(8, denali->flash_reg + ECC_CORRECTION);
}
mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
- denali->nand.ecc.bytes *= denali->devnum;
- denali->nand.ecc.strength *= denali->devnum;
+ chip->ecc.bytes *= denali->devnum;
+ chip->ecc.strength *= denali->devnum;
/* override the default read operations */
- denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
- denali->nand.ecc.read_page = denali_read_page;
- denali->nand.ecc.read_page_raw = denali_read_page_raw;
- denali->nand.ecc.write_page = denali_write_page;
- denali->nand.ecc.write_page_raw = denali_write_page_raw;
- denali->nand.ecc.read_oob = denali_read_oob;
- denali->nand.ecc.write_oob = denali_write_oob;
- denali->nand.erase = denali_erase;
+ chip->ecc.size = ECC_SECTOR_SIZE * denali->devnum;
+ chip->ecc.read_page = denali_read_page;
+ chip->ecc.read_page_raw = denali_read_page_raw;
+ chip->ecc.write_page = denali_write_page;
+ chip->ecc.write_page_raw = denali_write_page_raw;
+ chip->ecc.read_oob = denali_read_oob;
+ chip->ecc.write_oob = denali_write_oob;
+ chip->erase = denali_erase;
ret = nand_scan_tail(mtd);
if (ret)
--
2.7.4
Powered by blists - more mailing lists