| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <7b8736a3-d5ad-ab7d-7f79-2e5b694e74e0@synopsys.com>
Date: Thu, 23 Mar 2017 12:55:28 +0000
From: Joao Pinto <Joao.Pinto@...opsys.com>
To: Giuseppe CAVALLARO <peppe.cavallaro@...com>,
Joao Pinto <Joao.Pinto@...opsys.com>,
Corentin Labbe <clabbe.montjoie@...il.com>
CC: <alexandre.torgue@...com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: stmmac: Performance regression after commit aff3d9eff843 "net:
stmmac: enable multiple buffers"
Às 10:56 AM de 3/23/2017, Joao Pinto escreveu:
> Às 10:51 AM de 3/23/2017, Giuseppe CAVALLARO escreveu:
>> On 3/23/2017 11:48 AM, Giuseppe CAVALLARO wrote:
>>> Hello
>>>
>>> On 3/23/2017 11:20 AM, Corentin Labbe wrote:
>>>>> I have a 4.21 QoS Core with 4 RX + 4 TX and detected no regression.
>>>>>> Could you please share the iperf cmds you are using in order for me to
>>>>> reproduce
>>>>>> in my side?
>>>
HW Version: 4.21 QoS Core in HAPS DX7 (FPGA)
The connection between the FPGA and PC where stmmac is running is PCIe.
My configurations are done in stmmac_pci. Here they are:
@@ -68,10 +70,52 @@ static void stmmac_default_data(struct plat_stmmacenet_data
*plat)
{
plat->bus_id = 1;
plat->phy_addr = 0;
- plat->interface = PHY_INTERFACE_MODE_GMII;
- plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
- plat->has_gmac = 1;
- plat->force_sf_dma_mode = 1;
+ plat->interface = PHY_INTERFACE_MODE_SGMII;
+ plat->clk_csr = 0x5;
+ plat->has_gmac = 0;
+ plat->has_gmac4 = 1;
+ plat->force_sf_dma_mode = 0;
+
+ plat->rx_queues_to_use = 4;
+ plat->tx_queues_to_use = 4;
+
+ plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
+
+ plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_AVB;
+ plat->rx_queues_cfg[1].mode_to_use = MTL_QUEUE_DCB;
+ plat->rx_queues_cfg[2].mode_to_use = MTL_QUEUE_DCB;
+ plat->rx_queues_cfg[3].mode_to_use = MTL_QUEUE_DCB;
+
+ plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
+ plat->tx_queues_cfg[1].mode_to_use = MTL_QUEUE_AVB;
+ plat->tx_queues_cfg[2].mode_to_use = MTL_QUEUE_DCB;
+ plat->tx_queues_cfg[3].mode_to_use = MTL_QUEUE_DCB;
+
+ plat->tx_queues_cfg[1].send_slope = 0xCCC;
+ plat->tx_queues_cfg[1].idle_slope = 0x1333;
+ plat->tx_queues_cfg[1].high_credit = 0x4B0000;
+ plat->tx_queues_cfg[1].low_credit = 0xFFB50000;
+
+ plat->rx_queues_cfg[0].chan = 0;
+ plat->rx_queues_cfg[1].chan = 1;
+ plat->rx_queues_cfg[2].chan = 2;
+ plat->rx_queues_cfg[3].chan = 3;
+
+ plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
+ plat->tx_queues_cfg[0].weight = 0x10;
+ plat->tx_queues_cfg[1].weight = 0x11;
+ plat->tx_queues_cfg[2].weight = 0x12;
+ plat->tx_queues_cfg[3].weight = 0x13;
+
+ /* Disable Priority config by default */
+ plat->tx_queues_cfg[0].use_prio = false;
+ plat->rx_queues_cfg[0].use_prio = false;
+
+ /* Disable RX queues routing by default */
+ plat->rx_queues_cfg[0].pkt_route = 0x0;
+ plat->rx_queues_cfg[1].pkt_route = 0x0;
+ plat->rx_queues_cfg[2].pkt_route = 0x0;
+ plat->rx_queues_cfg[3].pkt_route = 0x0;
plat->mdio_bus_data->phy_reset = NULL;
plat->mdio_bus_data->phy_mask = 0;
@@ -83,22 +127,14 @@ static void stmmac_default_data(struct plat_stmmacenet_data
*plat)
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
+ plat->dma_cfg->fixed_burst = 0;
+ plat->dma_cfg->aal = 0;
+
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
-
- /* Set default number of RX and TX queues to use */
- plat->tx_queues_to_use = 1;
- plat->rx_queues_to_use = 1;
-
- /* Disable Priority config by default */
- plat->tx_queues_cfg[0].use_prio = false;
- plat->rx_queues_cfg[0].use_prio = false;
-
- /* Disable RX queues routing by default */
- plat->rx_queues_cfg[0].pkt_route = 0x0;
}
******* TESTS *******
*TEST 1: File (linux-next tarball) transfer of ~1.4G by scp to the DUT*
scp net-next-20170323.tar.gz xxxxx@...XXXX:/home/synopsys/
The authenticity of host 'XXXXX' can't be established.
ECDSA key fingerprint is SHA256:/XXXXXX.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'XXXXXX' (ECDSA) to the list of known hosts.
XXXXXX@...XX's password:
net-next20170323.tar.gz
100% 1366MB 79.3MB/s 00:17
ifconfig after transfer:
eth1 Link encap:Ethernet HWaddr XXXX
inet addr:XXXX Bcast:XXXX Mask:XXXX
inet6 addr: XXXXX Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1026614 errors:0 dropped:0 overruns:0 frame:0
TX packets:56804 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1502856063 (1.5 GB) TX bytes:4224767 (4.2 MB)
Interrupt:16
*stmmac Log after transfer:
#:~/temp$ dmesg | grep stmmac
[ 0.278200] stmmac - user ID: 0x10, Synopsys ID: 0x42
[ 0.278207] stmmaceth 0000:01:00.0: DMA HW capability register supported
[ 0.278209] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported
[ 0.278211] stmmaceth 0000:01:00.0: TX Checksum insertion supported
[ 0.278224] stmmaceth 0000:01:00.0: Enable RX Mitigation via HW Watchdog Timer
[ 0.315596] libphy: stmmac: probed
[ 0.315601] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): PHY
ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active
[ 0.315605] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): PHY
ID 01410cc2 at 1 IRQ POLL (stmmac-1:01)
[ 0.315608] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): PHY
ID 01410cc2 at 2 IRQ POLL (stmmac-1:02)
[ 0.315612] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): PHY
ID 01410cc2 at 3 IRQ POLL (stmmac-1:03)
[ 13.380009] Generic PHY stmmac-1:00: attached PHY driver [Generic PHY]
(mii_bus:phy_addr=stmmac-1:00, irq=-1)
[ 13.390093] stmmaceth 0000:01:00.0 eth1: IEEE 1588-2008 Advanced Timestamp
supported
[ 13.390200] stmmaceth 0000:01:00.0 eth1: registered PTP clock
[ 14.436743] stmmaceth 0000:01:00.0 eth1: Link is Up - 1Gbps/Full - flow
control off
[ 21.056476] stmmac_set_wol+0x55/0xc0
Conclusions: No packets lost, clean stmmac log.
* TEST 2: iperf
Server side:
#:/media/DevDisk/gitrepo/mainline-net$ iperf -s -B XXXX.0.3
------------------------------------------------------------
Server listening on TCP port 5001
Binding to local address XXXXX.0.3
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local XXXX.0.3 port 5001 connected with XXXX.0.2 port 54092
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-20.1 sec 1.03 GBytes 443 Mbits/sec
Client side:
#:~/temp$ iperf -c XXXX.0.3 --port 5001 -t 20 -i 5
------------------------------------------------------------
Client connecting to XXXX.0.3, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ 3] local XXXXX.0.2 port 54092 connected with XXXXX.0.3 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 5.0 sec 265 MBytes 445 Mbits/sec
[ 3] 5.0-10.0 sec 265 MBytes 444 Mbits/sec
[ 3] 10.0-15.0 sec 264 MBytes 444 Mbits/sec
[ 3] 15.0-20.0 sec 263 MBytes 442 Mbits/sec
[ 3] 0.0-20.0 sec 1.03 GBytes 444 Mbits/sec
Thanks,
Joao
Powered by blists - more mailing lists