[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1490392339-23565-3-git-send-email-menschel.p@posteo.de>
Date: Fri, 24 Mar 2017 22:52:19 +0100
From: Patrick Menschel <menschel.p@...teo.de>
To: robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
maxime.ripard@...e-electrons.com, wens@...e.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-can@...r.kernel.org
Cc: Patrick Menschel <menschel.p@...teo.de>
Subject: [PATCH v2 2/2] ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings
The A20 SoC has an on-board CAN controller. This patch adds the device node
and the corresponding pinctrl settings for pins PH20 and PH21.
The CAN controller is inherited from the A10 SoC and uses the same driver.
This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt
Signed-off-by: Patrick Menschel <menschel.p@...teo.de>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 2db97fc..25af586 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1096,6 +1096,11 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ can0_pins_a: can0@0 {
+ pins = "PH20","PH21";
+ function = "can";
+ };
+
clk_out_a_pins_a: clk_out_a@0 {
pins = "PI12";
function = "clk_out_a";
@@ -1582,6 +1587,14 @@
#size-cells = <0>;
};
+ can0: can@...2bc00 {
+ compatible = "allwinner,sun4i-a10-can";
+ reg = <0x01c2bc00 0x400>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 4>;
+ status = "disabled";
+ };
+
i2c4: i2c@...2c000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
--
1.9.1
Powered by blists - more mailing lists