[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1490629444.2719.3.camel@redhat.com>
Date: Mon, 27 Mar 2017 10:44:04 -0500
From: Dan Williams <dcbw@...hat.com>
To: Stefan Wahren <stefan.wahren@...e.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"David S. Miller" <davem@...emloft.net>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Marcel Holtmann <marcel@...tmann.org>,
Sebastian Reichel <sre@...nel.org>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC v4 06/10] net: qualcomm: make qca_common a separate
kernel module
On Mon, 2017-03-27 at 15:37 +0200, Stefan Wahren wrote:
> In order to share common functions between QCA7000 SPI and UART
> protocol
> driver the qca_common needs to be a separate kernel module.
Maybe "qca_eth_common"? There are many things Qualcomm, slightly fewer
things Qualcomm Atheros, and "qca_common" isn't very descriptive.
Dan
> Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
> ---
> drivers/net/ethernet/qualcomm/Kconfig | 8 +++++++-
> drivers/net/ethernet/qualcomm/Makefile | 5 +++--
> drivers/net/ethernet/qualcomm/qca_common.c | 10 ++++++++++
> 3 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/qualcomm/Kconfig
> b/drivers/net/ethernet/qualcomm/Kconfig
> index d7720bf..b4c369d 100644
> --- a/drivers/net/ethernet/qualcomm/Kconfig
> +++ b/drivers/net/ethernet/qualcomm/Kconfig
> @@ -16,7 +16,13 @@ config NET_VENDOR_QUALCOMM
> if NET_VENDOR_QUALCOMM
>
> config QCA7000
> - tristate "Qualcomm Atheros QCA7000 support"
> + tristate
> + help
> + This enables support for the Qualcomm Atheros QCA7000.
> +
> +config QCA7000_SPI
> + tristate "Qualcomm Atheros QCA7000 SPI support"
> + select QCA7000
> depends on SPI_MASTER && OF
> ---help---
> This SPI protocol driver supports the Qualcomm Atheros
> QCA7000.
> diff --git a/drivers/net/ethernet/qualcomm/Makefile
> b/drivers/net/ethernet/qualcomm/Makefile
> index 8080570..00d8729 100644
> --- a/drivers/net/ethernet/qualcomm/Makefile
> +++ b/drivers/net/ethernet/qualcomm/Makefile
> @@ -2,7 +2,8 @@
> # Makefile for the Qualcomm network device drivers.
> #
>
> -obj-$(CONFIG_QCA7000) += qcaspi.o
> -qcaspi-objs := qca_spi.o qca_common.o qca_7k.o qca_debug.o
> +obj-$(CONFIG_QCA7000) += qca_common.o
> +obj-$(CONFIG_QCA7000_SPI) += qcaspi.o
> +qcaspi-objs := qca_7k.o qca_debug.o qca_spi.o
>
> obj-y += emac/
> diff --git a/drivers/net/ethernet/qualcomm/qca_common.c
> b/drivers/net/ethernet/qualcomm/qca_common.c
> index d930524..f2c9e76 100644
> --- a/drivers/net/ethernet/qualcomm/qca_common.c
> +++ b/drivers/net/ethernet/qualcomm/qca_common.c
> @@ -21,7 +21,9 @@
> * by an atheros frame while transmitted over a serial channel;
> */
>
> +#include <linux/init.h>
> #include <linux/kernel.h>
> +#include <linux/module.h>
>
> #include "qca_common.h"
>
> @@ -46,6 +48,7 @@ qcafrm_create_header(u8 *buf, u16 length)
>
> return QCAFRM_HEADER_LEN;
> }
> +EXPORT_SYMBOL_GPL(qcafrm_create_header);
>
> u16
> qcafrm_create_footer(u8 *buf)
> @@ -57,6 +60,7 @@ qcafrm_create_footer(u8 *buf)
> buf[1] = 0x55;
> return QCAFRM_FOOTER_LEN;
> }
> +EXPORT_SYMBOL_GPL(qcafrm_create_footer);
>
> /* Gather received bytes and try to extract a full ethernet frame
> by
> * following a simple state machine.
> @@ -154,3 +158,9 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle,
> u8 *buf, u16 buf_len, u8 recv_by
>
> return ret;
> }
> +EXPORT_SYMBOL_GPL(qcafrm_fsm_decode);
> +
> +MODULE_DESCRIPTION("Qualcomm Atheros Common");
> +MODULE_AUTHOR("Qualcomm Atheros Communications");
> +MODULE_AUTHOR("Stefan Wahren <stefan.wahren@...e.com>");
> +MODULE_LICENSE("Dual BSD/GPL");
Powered by blists - more mailing lists