lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <81425b424868c7054893cf34eb6106ecaa09c6a6.1490651903.git.shli@fb.com>
Date:   Mon, 27 Mar 2017 15:19:43 -0700
From:   Shaohua Li <shli@...com>
To:     <linux-kernel@...r.kernel.org>, <linux-block@...r.kernel.org>
CC:     <axboe@...nel.dk>, <tj@...nel.org>,
        Vivek Goyal <vgoyal@...hat.com>, <jmoyer@...hat.com>,
        <Kernel-team@...com>
Subject: [PATCH 3/3] blk-throttle: add latency target support

One hard problem adding .low limit is to detect idle cgroup. If one
cgroup doesn't dispatch enough IO against its low limit, we must have a
mechanism to determine if other cgroups dispatch more IO. We added the
think time detection mechanism before, but it doesn't work for all
workloads. Here we add a latency based approach.

We already have mechanism to calculate latency threshold for each IO
size. For every IO dispatched from a cgorup, we compare its latency
against its threshold and record the info. If most IO latency is below
threshold (in the code I use 75%), the cgroup could be treated idle and
other cgroups can dispatch more IO.

Currently this latency target check is only for SSD as we can't
calcualte the latency target for hard disk. And this is only for cgroup
leaf node so far.

Signed-off-by: Shaohua Li <shli@...com>
---
 block/blk-throttle.c | 39 +++++++++++++++++++++++++++++++++++----
 1 file changed, 35 insertions(+), 4 deletions(-)

diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 140da29..c82bf9b 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -165,6 +165,10 @@ struct throtl_grp {
 	unsigned long checked_last_finish_time; /* ns / 1024 */
 	unsigned long avg_idletime; /* ns / 1024 */
 	unsigned long idletime_threshold; /* us */
+
+	unsigned int bio_cnt; /* total bios */
+	unsigned int bad_bio_cnt; /* bios exceeding latency threshold */
+	unsigned long bio_cnt_reset_time;
 };
 
 /* We measure latency for request size from <= 4k to >= 1M */
@@ -1720,12 +1724,15 @@ static bool throtl_tg_is_idle(struct throtl_grp *tg)
 	 * - single idle is too long, longer than a fixed value (in case user
 	 *   configure a too big threshold) or 4 times of slice
 	 * - average think time is more than threshold
+	 * - IO latency is largely below threshold
 	 */
 	unsigned long time = jiffies_to_usecs(4 * tg->td->throtl_slice);
 
 	time = min_t(unsigned long, MAX_IDLE_TIME, time);
 	return (ktime_get_ns() >> 10) - tg->last_finish_time > time ||
-	       tg->avg_idletime > tg->idletime_threshold;
+	       tg->avg_idletime > tg->idletime_threshold ||
+	       (tg->latency_target && tg->bio_cnt &&
+		tg->bad_bio_cnt * 5 < tg->bio_cnt);
 }
 
 static bool throtl_tg_can_upgrade(struct throtl_grp *tg)
@@ -2194,12 +2201,36 @@ void blk_throtl_bio_endio(struct bio *bio)
 
 	start_time = blk_stat_time(&bio->bi_issue_stat) >> 10;
 	finish_time = __blk_stat_time(finish_time_ns) >> 10;
+	if (!start_time || finish_time <= start_time)
+		return;
+
+	lat = finish_time - start_time;
 	/* this is only for bio based driver */
-	if (start_time && finish_time > start_time &&
-	    !(bio->bi_issue_stat.stat & SKIP_LATENCY)) {
-		lat = finish_time - start_time;
+	if (!(bio->bi_issue_stat.stat & SKIP_LATENCY))
 		throtl_track_latency(tg->td, blk_stat_size(&bio->bi_issue_stat),
 			bio_op(bio), lat);
+
+	if (tg->latency_target) {
+		int bucket;
+		unsigned int threshold;
+
+		bucket = request_bucket_index(
+			blk_stat_size(&bio->bi_issue_stat));
+		threshold = tg->td->avg_buckets[bucket].latency +
+			tg->latency_target;
+		if (lat > threshold)
+			tg->bad_bio_cnt++;
+		/*
+		 * Not race free, could get wrong count, which means cgroups
+		 * will be throttled
+		 */
+		tg->bio_cnt++;
+	}
+
+	if (time_after(jiffies, tg->bio_cnt_reset_time) || tg->bio_cnt > 1024) {
+		tg->bio_cnt_reset_time = tg->td->throtl_slice + jiffies;
+		tg->bio_cnt /= 2;
+		tg->bad_bio_cnt /= 2;
 	}
 }
 #endif
-- 
2.9.3

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ