[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170328054458.29341-1-joel@jms.id.au>
Date: Tue, 28 Mar 2017 16:14:56 +1030
From: Joel Stanley <joel@....id.au>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
openbmc@...ts.ozlabs.org, devicetree@...r.kernel.org,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Jeremy Kerr <jk@...abs.org>
Subject: [PATCH 0/2] drivers: serial: Aspeed VUART driver
This is a driver for the Aspeed VUART. The VUART is a serial device on the BMC
side of the LPC bus that connects a BMC to it's host processor.
We add a flag to the serial core to allow the driver to skip probing of the
THRE irq behaviour, which could hang due to the host not reading bytes out of
the buffer.
We've been using this on systems for over a year, so it has seen a good amount
of testing.
Cheers,
Joel
Jeremy Kerr (1):
drivers/serial: Add driver for Aspeed virtual UART
Joel Stanley (1):
serial: 8250: Add flag so drivers can avoid THRE probe
Documentation/devicetree/bindings/serial/8250.txt | 2 +
drivers/tty/serial/8250/8250_port.c | 2 +-
drivers/tty/serial/Kconfig | 10 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/aspeed-vuart.c | 335 ++++++++++++++++++++++
include/linux/serial_core.h | 1 +
6 files changed, 350 insertions(+), 1 deletion(-)
create mode 100644 drivers/tty/serial/aspeed-vuart.c
--
2.11.0
Powered by blists - more mailing lists