lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170328111938.21297-5-alexandre.belloni@free-electrons.com>
Date:   Tue, 28 Mar 2017 13:19:31 +0200
From:   Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To:     Nicolas Ferre <nicolas.ferre@...rochip.com>
Cc:     linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Boris Brezillon <boris.brezillon@...e-electrons.com>,
        Wenyou.Yang@...rochip.com,
        Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCH v2 04/11] ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S

The number of register we can safely pass to at91_pm_suspend_in_sram is
limited. Instead, pass the address to the at91_pm_data structure.

The offsets are automatically generated to avoid hardcoding them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
---
 arch/arm/mach-at91/Makefile          | 33 +++++++++++++++
 arch/arm/mach-at91/pm.c              | 78 +++++++++++++++---------------------
 arch/arm/mach-at91/pm.h              | 16 +++++---
 arch/arm/mach-at91/pm_data-offsets.c | 13 ++++++
 arch/arm/mach-at91/pm_suspend.S      | 29 ++++++--------
 5 files changed, 102 insertions(+), 67 deletions(-)
 create mode 100644 arch/arm/mach-at91/pm_data-offsets.c

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c5bbf8bb8c0f..858ef14f961c 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -18,3 +18,36 @@ endif
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
 endif
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-y
+	"/^->/{s:->#\(.*\):/* \1 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+	s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+	(set -e; \
+	 echo "#ifndef $2"; \
+	 echo "#define $2"; \
+	 echo "/*"; \
+	 echo " * DO NOT MODIFY."; \
+	 echo " *"; \
+	 echo " * This file was generated by Kbuild"; \
+	 echo " */"; \
+	 echo ""; \
+	 sed -ne $(sed-y); \
+	 echo ""; \
+	 echo "#endif" )
+endef
+
+arch/arm/mach-at91/pm_data-offsets.s: arch/arm/mach-at91/pm_data-offsets.c
+	$(call if_changed_dep,cc_s_c)
+
+include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
+	$(call filechk,offsets,__PM_DATA_OFFSETS_H__)
+
+arch/arm/mach-at91/pm_suspend.o: include/generated/at91_pm_data-offsets.h
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index c780dda3b604..a35b1541b328 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -37,18 +37,13 @@ extern void at91_pinctrl_gpio_suspend(void);
 extern void at91_pinctrl_gpio_resume(void);
 #endif
 
-static struct {
-	void __iomem *pmc;
-	void __iomem *ramc[2];
-	unsigned long uhp_udp_mask;
-	int memctrl;
-} at91_pm_data;
+static struct at91_pm_data pm_data;
 
 #define at91_ramc_read(id, field) \
-	__raw_readl(at91_pm_data.ramc[id] + field)
+	__raw_readl(pm_data.ramc[id] + field)
 
 #define at91_ramc_write(id, field, value) \
-	__raw_writel(value, at91_pm_data.ramc[id] + field)
+	__raw_writel(value, pm_data.ramc[id] + field)
 
 static int at91_pm_valid_state(suspend_state_t state)
 {
@@ -84,10 +79,10 @@ static int at91_pm_verify_clocks(void)
 	unsigned long scsr;
 	int i;
 
-	scsr = readl(at91_pm_data.pmc + AT91_PMC_SCSR);
+	scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
-	if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
+	if ((scsr & pm_data.uhp_udp_mask) != 0) {
 		pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 		return 0;
 	}
@@ -98,7 +93,7 @@ static int at91_pm_verify_clocks(void)
 
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
-		css = readl(at91_pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -124,25 +119,18 @@ int at91_suspend_entering_slow_clock(void)
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
-static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
-			  void __iomem *ramc1, int memctrl);
-
-extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
-			    void __iomem *ramc1, int memctrl);
+static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
+extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
 extern u32 at91_pm_suspend_in_sram_sz;
 
 static void at91_pm_suspend(suspend_state_t state)
 {
-	unsigned int pm_data = at91_pm_data.memctrl;
-
-	pm_data |= (state == PM_SUSPEND_MEM) ?
-				AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+	pm_data.mode = (state == PM_SUSPEND_MEM) ? AT91_PM_SLOW_CLOCK : 0;
 
 	flush_cache_all();
 	outer_disable();
 
-	at91_suspend_sram_fn(at91_pm_data.pmc, at91_pm_data.ramc[0],
-			     at91_pm_data.ramc[1], pm_data);
+	at91_suspend_sram_fn(&pm_data);
 
 	outer_resume();
 }
@@ -245,7 +233,7 @@ static void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (at91_pm_data.ramc[0]), "r" (AT91_MC_SDRAMC_LPR),
+		: "r" (0), "r" (pm_data.ramc[0]), "r" (AT91_MC_SDRAMC_LPR),
 		  "r" (1), "r" (AT91_MC_SDRAMC_SRR),
 		  "r" (lpr));
 }
@@ -260,7 +248,7 @@ static void at91_ddr_standby(void)
 	u32 lpr0, lpr1 = 0;
 	u32 saved_lpr0, saved_lpr1 = 0;
 
-	if (at91_pm_data.ramc[1]) {
+	if (pm_data.ramc[1]) {
 		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
 		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
 		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
@@ -272,13 +260,13 @@ static void at91_ddr_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	if (at91_pm_data.ramc[1])
+	if (pm_data.ramc[1])
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	if (at91_pm_data.ramc[1])
+	if (pm_data.ramc[1])
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
@@ -306,7 +294,7 @@ static void at91sam9_sdram_standby(void)
 	u32 lpr0, lpr1 = 0;
 	u32 saved_lpr0, saved_lpr1 = 0;
 
-	if (at91_pm_data.ramc[1]) {
+	if (pm_data.ramc[1]) {
 		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
 		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
 		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
@@ -318,13 +306,13 @@ static void at91sam9_sdram_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
-	if (at91_pm_data.ramc[1])
+	if (pm_data.ramc[1])
 		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
-	if (at91_pm_data.ramc[1])
+	if (pm_data.ramc[1])
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
@@ -344,8 +332,8 @@ static __init void at91_dt_ramc(void)
 	const void *standby = NULL;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
-		at91_pm_data.ramc[idx] = of_iomap(np, 0);
-		if (!at91_pm_data.ramc[idx])
+		pm_data.ramc[idx] = of_iomap(np, 0);
+		if (!pm_data.ramc[idx])
 			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
 
 		if (!standby)
@@ -371,12 +359,12 @@ static void at91rm9200_idle(void)
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-	writel(AT91_PMC_PCK, at91_pm_data.pmc + AT91_PMC_SCDR);
+	writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
 }
 
 static void at91sam9_idle(void)
 {
-	writel(AT91_PMC_PCK, at91_pm_data.pmc + AT91_PMC_SCDR);
+	writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
 	cpu_do_idle();
 }
 
@@ -445,8 +433,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 		platform_device_register(&at91_cpuidle_device);
 
 	pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
-	at91_pm_data.pmc = of_iomap(pmc_np, 0);
-	if (!at91_pm_data.pmc) {
+	pm_data.pmc = of_iomap(pmc_np, 0);
+	if (!pm_data.pmc) {
 		pr_err("AT91: PM not supported, PMC not found\n");
 		return;
 	}
@@ -471,8 +459,8 @@ void __init at91rm9200_pm_init(void)
 	 */
 	at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
 
-	at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
-	at91_pm_data.memctrl = AT91_MEMCTRL_MC;
+	pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
+	pm_data.memctrl = AT91_MEMCTRL_MC;
 
 	at91_pm_init(at91rm9200_idle);
 }
@@ -480,31 +468,31 @@ void __init at91rm9200_pm_init(void)
 void __init at91sam9260_pm_init(void)
 {
 	at91_dt_ramc();
-	at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
-	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+	pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
+	pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
 	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9g45_pm_init(void)
 {
 	at91_dt_ramc();
-	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
-	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+	pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
+	pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
 	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9x5_pm_init(void)
 {
 	at91_dt_ramc();
-	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
-	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+	pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+	pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
 	at91_pm_init(at91sam9_idle);
 }
 
 void __init sama5_pm_init(void)
 {
 	at91_dt_ramc();
-	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
-	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+	pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+	pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
 	at91_pm_init(NULL);
 }
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 8eed156ef19a..fc0f7d048187 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -21,12 +21,16 @@
 #define AT91_MEMCTRL_SDRAMC	1
 #define AT91_MEMCTRL_DDRSDR	2
 
-#define	AT91_PM_MEMTYPE_MASK	0x0f
-
-#define	AT91_PM_MODE_OFFSET	4
-#define	AT91_PM_MODE_MASK	0x01
-#define	AT91_PM_MODE(x)		(((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
-
 #define	AT91_PM_SLOW_CLOCK	0x01
 
+#ifndef __ASSEMBLY__
+struct at91_pm_data {
+	void __iomem *pmc;
+	void __iomem *ramc[2];
+	unsigned long uhp_udp_mask;
+	unsigned int memctrl;
+	unsigned int mode;
+};
+#endif
+
 #endif
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
new file mode 100644
index 000000000000..30302cb16df0
--- /dev/null
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -0,0 +1,13 @@
+#include <linux/stddef.h>
+#include <linux/kbuild.h>
+#include "pm.h"
+
+int main(void)
+{
+	DEFINE(PM_DATA_PMC,		offsetof(struct at91_pm_data, pmc));
+	DEFINE(PM_DATA_RAMC0,		offsetof(struct at91_pm_data, ramc[0]));
+	DEFINE(PM_DATA_RAMC1,		offsetof(struct at91_pm_data, ramc[1]));
+	DEFINE(PM_DATA_MEMCTRL,	offsetof(struct at91_pm_data, memctrl));
+	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
+	return 0;
+}
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index a25defda3d22..ed317657e760 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -14,6 +14,7 @@
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
 #include "pm.h"
+#include "generated/at91_pm_data-offsets.h"
 
 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
 #define	SRAMC_SELF_FRESH_EXIT		0x00
@@ -72,13 +73,9 @@ tmp2	.req	r5
 	.arm
 
 /*
- * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
- *			void __iomem *ramc1, int memctrl)
+ * void at91_suspend_sram_fn(struct at91_pm_data*)
  * @input param:
- * 	@r0: base address of AT91_PMC
- *  	@r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
- *	@r2: base address of second SDRAM Controller or 0 if not present
- *	@r3: pm information
+ * 	@r0: base address of struct at91_pm_data
  */
 /* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
 	.align 3
@@ -90,16 +87,16 @@ ENTRY(at91_pm_suspend_in_sram)
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4
 
-	str	r0, .pmc_base
-	str	r1, .sramc_base
-	str	r2, .sramc1_base
-
-	and	r0, r3, #AT91_PM_MEMTYPE_MASK
-	str	r0, .memtype
-
-	lsr	r0, r3, #AT91_PM_MODE_OFFSET
-	and	r0, r0, #AT91_PM_MODE_MASK
-	str	r0, .pm_mode
+	ldr	tmp1, [r0, #PM_DATA_PMC]
+	str	tmp1, .pmc_base
+	ldr	tmp1, [r0, #PM_DATA_RAMC0]
+	str	tmp1, .sramc_base
+	ldr	tmp1, [r0, #PM_DATA_RAMC1]
+	str	tmp1, .sramc1_base
+	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
+	str	tmp1, .memtype
+	ldr	tmp1, [r0, #PM_DATA_MODE]
+	str	tmp1, .pm_mode
 
 	/* Active the self-refresh mode */
 	mov	r0, #SRAMC_SELF_FRESH_ACTIVE
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ