[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <65114e62-7458-b6f7-327c-f07a5096a452@sigmadesigns.com>
Date: Wed, 29 Mar 2017 13:34:45 +0200
From: Marc Gonzalez <marc_gonzalez@...madesigns.com>
To: Bjorn Helgaas <helgaas@...nel.org>,
Marc Zyngier <marc.zyngier@....com>,
Thomas Gleixner <tglx@...utronix.de>
CC: Robin Murphy <robin.murphy@....com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Liviu Dudau <liviu.dudau@....com>,
David Laight <david.laight@...lab.com>,
linux-pci <linux-pci@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Thibaud Cornic <thibaud_cornic@...madesigns.com>,
Phuong Nguyen <phuong_nguyen@...madesigns.com>,
LKML <linux-kernel@...r.kernel.org>,
DT <devicetree@...r.kernel.org>, Mason <slash.tmp@...e.fr>
Subject: [PATCH v3 2/2] PCI: Add tango PCIe host bridge support
This driver is used to work around HW bugs in the controller.
Note: the controller does NOT support the following features.
Legacy PCI interrupts
IO space
Signed-off-by: Marc Gonzalez <marc_gonzalez@...madesigns.com>
---
Documentation/devicetree/bindings/pci/tango-pcie.txt | 33 +++++++++
drivers/pci/host/Kconfig | 7 ++
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pcie-tango.c | 150 +++++++++++++++++++++++++++++++++++++++
4 files changed, 191 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/tango-pcie.txt b/Documentation/devicetree/bindings/pci/tango-pcie.txt
new file mode 100644
index 000000000000..f8e150ec41d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/tango-pcie.txt
@@ -0,0 +1,33 @@
+Sigma Designs Tango PCIe controller
+
+Required properties:
+
+- compatible: "sigma,smp8759-pcie"
+- reg: address/size of PCI configuration space, and pcie_reg
+- bus-range: defined by size of PCI configuration space
+- device_type: "pci"
+- #size-cells: <2>
+- #address-cells: <3>
+- #interrupt-cells: <1>
+- ranges: translation from system to bus addresses
+- interrupts: spec for misc interrupts and MSI
+- msi-controller
+
+Example:
+
+ pcie@...00 {
+ compatible = "sigma,smp8759-pcie";
+ reg = <0x50000000 SZ_64M>, <0x2e000 0x100>;
+ bus-range = <0 63>;
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ /* http://elinux.org/Device_Tree_Usage#PCI_Address_Translation */
+ /* BUS_ADDRESS(3) CPU_PHYSICAL(1) SIZE(2) */
+ ranges = <0x02000000 0x0 0x04000000 0x54000000 0x0 SZ_192M>;
+ interrupts =
+ <54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */
+ <55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */
+ msi-controller;
+ };
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index d7e7c0a827c3..8a622578a760 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -285,6 +285,13 @@ config PCIE_ROCKCHIP
There is 1 internal PCIe port available to support GEN2 with
4 slots.
+config PCIE_TANGO
+ tristate "Tango PCIe controller"
+ depends on ARCH_TANGO && PCI_MSI && OF
+ select PCI_HOST_COMMON
+ help
+ Say Y here to enable PCIe controller support on Tango SoC.
+
config VMD
depends on PCI_MSI && X86_64
tristate "Intel Volume Management Device Driver"
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 084cb4983645..fc7ea90196f3 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -32,4 +32,5 @@ obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
+obj-$(CONFIG_PCIE_TANGO) += pcie-tango.o
obj-$(CONFIG_VMD) += vmd.o
diff --git a/drivers/pci/host/pcie-tango.c b/drivers/pci/host/pcie-tango.c
index e88850983a1d..dbc2663486b5 100644
--- a/drivers/pci/host/pcie-tango.c
+++ b/drivers/pci/host/pcie-tango.c
@@ -192,3 +192,153 @@ static int tango_msi_probe(struct platform_device *pdev, struct tango_pcie *pcie
return 0;
}
+
+/*** HOST BRIDGE SUPPORT ***/
+
+static int smp8759_config_read(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val)
+{
+ int ret;
+ struct pci_config_window *cfg = bus->sysdata;
+ struct tango_pcie *pcie = dev_get_drvdata(cfg->parent);
+
+ /*
+ * QUIRK #1
+ * Reads in configuration space outside devfn 0 return garbage.
+ */
+ if (devfn != 0) {
+ *val = ~0; /* Is this required even if we return an error? */
+ return PCIBIOS_FUNC_NOT_SUPPORTED; /* Error seems appropriate */
+ }
+
+ /*
+ * QUIRK #2
+ * The root complex advertizes a fake BAR, which is used to filter
+ * bus-to-system requests. Hide it from Linux.
+ */
+ if (where == PCI_BASE_ADDRESS_0 && bus->number == 0) {
+ *val = 0; /* 0 or ~0 to hide the BAR from Linux? */
+ return PCIBIOS_SUCCESSFUL; /* Should we return error or success? */
+ }
+
+ /*
+ * QUIRK #3
+ * Unfortunately, config and mem spaces are muxed.
+ * Linux does not support such a setting, since drivers are free
+ * to access mem space directly, at any time.
+ * Therefore, we can only PRAY that config and mem space accesses
+ * NEVER occur concurrently.
+ */
+ writel_relaxed(1, pcie->mux);
+ ret = pci_generic_config_read(bus, devfn, where, size, val);
+ writel_relaxed(0, pcie->mux);
+
+ return ret;
+}
+
+static int smp8759_config_write(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 val)
+{
+ int ret;
+ struct pci_config_window *cfg = bus->sysdata;
+ struct tango_pcie *pcie = dev_get_drvdata(cfg->parent);
+
+ writel_relaxed(1, pcie->mux);
+ ret = pci_generic_config_write(bus, devfn, where, size, val);
+ writel_relaxed(0, pcie->mux);
+
+ return ret;
+}
+
+static struct pci_ecam_ops smp8759_ecam_ops = {
+ .bus_shift = 20,
+ .pci_ops = {
+ .map_bus = pci_ecam_map_bus,
+ .read = smp8759_config_read,
+ .write = smp8759_config_write,
+ }
+};
+
+static const struct of_device_id tango_pcie_ids[] = {
+ { .compatible = "sigma,smp8759-pcie" },
+ { /* sentinel */ },
+};
+
+static void smp8759_init(struct tango_pcie *pcie, void __iomem *base)
+{
+ pcie->mux = base + 0x48;
+ pcie->msi_status = base + 0x80;
+ pcie->msi_mask = base + 0xa0;
+ pcie->msi_doorbell = 0xa0000000 + 0x2e07c;
+}
+
+static int tango_pcie_probe(struct platform_device *pdev)
+{
+ int ret;
+ void __iomem *base;
+ struct resource *res;
+ struct tango_pcie *pcie;
+ struct device *dev = &pdev->dev;
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pcie);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (of_device_is_compatible(dev->of_node, "sigma,smp8759-pcie"))
+ smp8759_init(pcie, base);
+
+ ret = tango_msi_probe(pdev, pcie);
+ if (ret)
+ return ret;
+
+ return pci_host_common_probe(pdev, &smp8759_ecam_ops);
+}
+
+static int tango_pcie_remove(struct platform_device *pdev)
+{
+ return tango_msi_remove(pdev);
+}
+
+static struct platform_driver tango_pcie_driver = {
+ .probe = tango_pcie_probe,
+ .remove = tango_pcie_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = tango_pcie_ids,
+ },
+};
+
+module_platform_driver(tango_pcie_driver);
+
+#define VENDOR_SIGMA 0x1105
+
+/*
+ * QUIRK #4
+ * The root complex advertizes the wrong device class.
+ * Header Type 1 is for PCI-to-PCI bridges.
+ */
+static void tango_fixup_class(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(VENDOR_SIGMA, PCI_ANY_ID, tango_fixup_class);
+
+/*
+ * QUIRK #5
+ * Only transfers within the root complex BAR are forwarded to the host.
+ * By default, the DMA framework expects that
+ * PCI address 0x8000_0000 maps to system address 0x8000_0000
+ * which is where DRAM0 is mapped.
+ */
+static void tango_fixup_bar(struct pci_dev *dev)
+{
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x80000000);
+}
+DECLARE_PCI_FIXUP_FINAL(VENDOR_SIGMA, PCI_ANY_ID, tango_fixup_bar);
--
2.11.0
Powered by blists - more mailing lists