[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20170329123118.yvwnqpgtamc5pjqf@lukather>
Date: Wed, 29 Mar 2017 14:31:18 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Icenowy Zheng <icenowy@...c.io>
Cc: linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Mike Turquette <mturquette@...libre.com>,
David Airlie <airlied@...ux.ie>,
Mark Rutland <mark.rutland@....com>,
Daniel Vetter <daniel.vetter@...el.com>,
linux-sunxi <linux-sunxi@...glegroups.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
Stephen Boyd <sboyd@...eaurora.org>,
devicetree <devicetree@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Chen-Yu Tsai <wens@...e.org>, Rob Herring <robh@...nel.org>
Subject: Re: [PATCH 7/15] dt-bindings: display: sun4i: Add
allwinner,tcon-channel property
On Tue, Mar 28, 2017 at 06:05:08PM +0800, Icenowy Zheng wrote:
>
> 2017年3月27日 上午5:11于 Maxime Ripard <maxime.ripard@...e-electrons.com>写道:
> >
> > On Fri, Mar 17, 2017 at 11:34:45AM +0800, Chen-Yu Tsai wrote:
> > > On Thu, Mar 16, 2017 at 1:37 AM, Rob Herring <robh@...nel.org> wrote:
> > > > On Tue, Mar 07, 2017 at 09:56:26AM +0100, Maxime Ripard wrote:
> > > >> The Allwinner Timings Controller has two, mutually exclusive, channels.
> > > >> When the binding has been introduced, it was assumed that there would be
> > > >> only a single user per channel in the system.
> > > >>
> > > >> While this is likely for the channel 0 which only connects to LCD displays,
> > > >> it turns out that the channel 1 can be connected to multiple controllers in
> > > >> the SoC (HDMI and TV encoders for example). And while the simultaneous use
> > > >> of HDMI and TV outputs cannot be achieved, switching from one to the other
> > > >> at runtime definitely sounds plausible.
> > > >>
> > > >> Add an extra property, allwinner,tcon-channel, to specify for a given
> > > >> endpoint which TCON channel it is connected to, while falling back to the
> > > >> previous mechanism if that property is missing.
> > > >
> > > > I think perhaps TCON channels should have been ports rather than
> > > > endpoints. The fact that the channels are mutually exclusive can be
> > > > handled in the driver and doesn't really matter in the binding. How
> > > > painful would it be to rework things to move TCON channel 1 from port 0,
> > > > endpoint 1 to port 1?
> > >
> > > Having a separate output port for channel 1 was one option we discussed.
> > > However it wouldn't work well with the kernel's of_graph based crtc
> > > detection (drm_of_find_possible_crtcs / drm_of_find_possible_crtcs),
> > > which has the crtcs bound via the output port. As the logic is used
> > > by multiple drivers, I'm not sure it's easy to rework or test.
> >
> > Can't we use a different logic than drm_of_find_possible_crtcs to fill
> > the same role?
> >
> > > Also, we still have to support old device trees using channel 1 from
> > > output port 0 endpoint 1. This is the TV encoder on sun5i (A10s/A13/R8).
>
> And from A83T on we will face channel-1 only TCONs., which do not
> have channel 0 at all in hardware.
Yes, but those patches have not been merged yet, so we don't have to
care about the backward compatibility.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists