[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1490856383-31560-24-git-send-email-yamada.masahiro@socionext.com>
Date: Thu, 30 Mar 2017 15:46:09 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-mtd@...ts.infradead.org
Cc: Enrico Jorns <ejo@...gutronix.de>,
Artem Bityutskiy <artem.bityutskiy@...ux.intel.com>,
Dinh Nguyen <dinguyen@...nel.org>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Marek Vasut <marek.vasut@...il.com>,
Graham Moore <grmoore@...nsource.altera.com>,
David Woodhouse <dwmw2@...radead.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
Chuanxiao Dong <chuanxiao.dong@...el.com>,
Jassi Brar <jaswinder.singh@...aro.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
linux-kernel@...r.kernel.org,
Brian Norris <computersforpeace@...il.com>,
Richard Weinberger <richard@....at>,
Cyrille Pitchen <cyrille.pitchen@...el.com>
Subject: [PATCH v3 23/37] mtd: nand: denali: fix NAND_CMD_STATUS handling
The current NAND_CMD_STATUS handling is weird; it just reads the
WRITE_PROTECT register, and returns NAND_STATUS_WP if it is set.
It does not send Read Status (0x70) command, so it is not helpful
for checking the current device status.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Changes in v3: None
Changes in v2:
- Newly added
drivers/mtd/nand/denali.c | 21 +++++----------------
1 file changed, 5 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 75b045e0..bca4fcd 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -107,21 +107,6 @@ static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
denali->buf.buf[denali->buf.tail++] = byte;
}
-/* reads the status of the device */
-static void read_status(struct denali_nand_info *denali)
-{
- uint32_t cmd;
-
- /* initialize the data buffer to store status */
- reset_buf(denali);
-
- cmd = ioread32(denali->flash_reg + WRITE_PROTECT);
- if (cmd)
- write_byte_to_buf(denali, NAND_STATUS_WP);
- else
- write_byte_to_buf(denali, 0);
-}
-
/* Reset the flash controller */
static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{
@@ -893,7 +878,11 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
switch (cmd) {
case NAND_CMD_STATUS:
- read_status(denali);
+ reset_buf(denali);
+ addr = MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, addr | 0, cmd);
+ index_addr_read_data(denali, addr | 2, &id);
+ write_byte_to_buf(denali, id);
break;
case NAND_CMD_READID:
case NAND_CMD_PARAM:
--
2.7.4
Powered by blists - more mailing lists