lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1490844216-32085-1-git-send-email-john.stultz@linaro.org>
Date:   Wed, 29 Mar 2017 20:23:36 -0700
From:   John Stultz <john.stultz@...aro.org>
To:     lkml <linux-kernel@...r.kernel.org>
Cc:     John Stultz <john.stultz@...aro.org>,
        Wei Xu <xuwei5@...ilicon.com>,
        Guodong Xu <guodong.xu@...aro.org>,
        Amit Pundir <amit.pundir@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        John Youn <johnyoun@...opsys.com>,
        Douglas Anderson <dianders@...omium.org>,
        Chen Yu <chenyu56@...wei.com>,
        Felipe Balbi <felipe.balbi@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-usb@...r.kernel.org
Subject: [PATCH v2] usb: dwc2: Make sure we disconnect the gadget state

I had seen some odd behavior with HiKey's usb-gadget interface
that I finally seemed to have chased down. Basically every other
time I plugged in the OTG port, the gadget interface would
properly initialize. The other times, I'd get a big WARN_ON
in dwc2_hsotg_init_fifo() about the fifo_map not being clear.

Ends up if we don't disconnect the gadget state, the fifo-map
doesn't get cleared properly, which causes WARN_ON messages and
also results in the device not properly being setup as a gadget
every other time the OTG port is connected.

So this patch adds a call to dwc2_hsotg_disconnect() in the
reset path so the state is properly cleared.

With it, the gadget interface initializes properly on every
plug in.

Cc: Wei Xu <xuwei5@...ilicon.com>
Cc: Guodong Xu <guodong.xu@...aro.org>
Cc: Amit Pundir <amit.pundir@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: John Youn <johnyoun@...opsys.com>
Cc: Douglas Anderson <dianders@...omium.org>
Cc: Chen Yu <chenyu56@...wei.com>
Cc: Felipe Balbi <felipe.balbi@...ux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-usb@...r.kernel.org
Acked-by: John Youn <johnyoun@...opsys.com>
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
v2: Minor typo fix suggested by Sergei Shtylyov
---
 drivers/usb/dwc2/hcd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index a73722e..91ed5b6 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3264,6 +3264,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
 		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
+		dwc2_hsotg_disconnect(hsotg);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		dwc2_hsotg_core_connect(hsotg);
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ