| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 31 Mar 2017 09:49:47 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Madalin Bucur <madalin.bucur@....com>
Cc: robh+dt@...nel.org, mark.rutland@....com,
devicetree@...r.kernel.org, Gang.Liu@....com,
catalin.marinas@....com, Roy Pledge <roy.pledge@....com>,
will.deacon@....com, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/3] dts: arm64: add DPAA QBMan portals
On Thu, Mar 30, 2017 at 05:37:50PM +0300, Madalin Bucur wrote:
> Add the DPAA 1.x DPAA QMan and BMan portal nodes.
>
> Signed-off-by: Roy Pledge <roy.pledge@....com>
> Signed-off-by: Madalin Bucur <madalin.bucur@....com>
The patches should be prefixed like 'arm64: dts: ...'.
> ---
> .../boot/dts/freescale/qoriq-bman1-portals.dtsi | 67 +++++++++++++++++++
> .../boot/dts/freescale/qoriq-qman1-portals.dtsi | 76 ++++++++++++++++++++++
> 2 files changed, 143 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
What does the suffix number '1' mean here?
>
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> new file mode 100644
> index 0000000..b007344
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-bman1-portals.dtsi
> @@ -0,0 +1,67 @@
> +/*
> + * QorIQ BMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&bportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + bman-portal@0 {
> + compatible = "fsl,bman-portal";
The bindings/soc/fsl/bman-portals.txt says: Must include
"fsl,bman-portal-<hardware revision>".
> + reg = <0x0 0x4000 0x4000000 0x4000>;
Can we write it in the same way how the example in the bindings doc
does?
reg = <0x0 0x4000>, <0x4000000 0x4000>;
It's more obvious to tell that it has two memory regions.
> + interrupts = <0 173 0x4>;
Can we use GIC_SPI and IRQ_TYPE_LEVEL_HIGH which are defined by
headers in include/dt-bindings/interrupt-controller/ to make it more
readable?
Shawn
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 175 0x4>;
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 177 0x4>;
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 179 0x4>;
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 181 0x4>;
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 183 0x4>;
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 185 0x4>;
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 187 0x4>;
> + };
> +
> + bman-portal@...00 {
> + compatible = "fsl,bman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 189 0x4>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> new file mode 100644
> index 0000000..4baec2c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/qoriq-qman1-portals.dtsi
> @@ -0,0 +1,76 @@
> +/*
> + * QorIQ QMan Portals device tree
> + *
> + * Copyright 2011-2016 Freescale Semiconductor Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> + */
> +
> +&qportals {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> +
> + qportal0: qman-portal@0 {
> + compatible = "fsl,qman-portal";
> + reg = <0x0 0x4000 0x4000000 0x4000>;
> + interrupts = <0 172 0x4>;
> + cell-index = <0>;
> + };
> +
> + qportal1: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x10000 0x4000 0x4010000 0x4000>;
> + interrupts = <0 174 0x4>;
> + cell-index = <1>;
> + };
> +
> + qportal2: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x20000 0x4000 0x4020000 0x4000>;
> + interrupts = <0 176 0x4>;
> + cell-index = <2>;
> + };
> +
> + qportal3: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x30000 0x4000 0x4030000 0x4000>;
> + interrupts = <0 178 0x4>;
> + cell-index = <3>;
> + };
> +
> + qportal4: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x40000 0x4000 0x4040000 0x4000>;
> + interrupts = <0 180 0x4>;
> + cell-index = <4>;
> + };
> +
> + qportal5: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x50000 0x4000 0x4050000 0x4000>;
> + interrupts = <0 182 0x4>;
> + cell-index = <5>;
> + };
> +
> + qportal6: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x60000 0x4000 0x4060000 0x4000>;
> + interrupts = <0 184 0x4>;
> + cell-index = <6>;
> + };
> +
> + qportal7: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x70000 0x4000 0x4070000 0x4000>;
> + interrupts = <0 186 0x4>;
> + cell-index = <7>;
> + };
> +
> + qportal8: qman-portal@...00 {
> + compatible = "fsl,qman-portal";
> + reg = <0x80000 0x4000 0x4080000 0x4000>;
> + interrupts = <0 188 0x4>;
> + cell-index = <8>;
> + };
> +};
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists