[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1490959839-39816-1-git-send-email-yt.shen@mediatek.com>
Date: Fri, 31 Mar 2017 19:30:27 +0800
From: YT Shen <yt.shen@...iatek.com>
To: CK Hu <ck.hu@...iatek.com>, Philipp Zabel <p.zabel@...gutronix.de>
CC: David Airlie <airlied@...ux.ie>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
<dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <yingjoe.chen@...iatek.com>,
<emil.l.velikov@...il.com>, <thierry.reding@...il.com>,
Daniel Kurtz <djkurtz@...omium.org>,
YT Shen <yt.shen@...iatek.com>
Subject: [PATCH v13 00/12] MT2701 DRM support
This is MT2701 DRM support PATCH v13, based on 4.11-rc1.
We add DSI interrupt control, transfer function for MIPI DSI panel support.
Most codes are the same, except some register changed.
For example:
- DISP_OVL address offset changed, color format definition changed.
- DISP_RDMA fifo size changed.
- DISP_COLOR offset changed.
- MIPI_TX setting changed.
We add a new component DDP_COMPONENT_BLS, and the connections are updated.
OVL -> RDMA -> COLOR -> BLS -> DSI
RDMA -> DPI
And we have shadow register support in MT2701.
Changes since v12:
- Fix DSI enable flow we changed at v12
Changes since v11:
- Update mtk_dsi_poweron() and mtk_output_dsi_enable() to symmetric flow
Changes since v10:
- Add binding descriptions for newly added bindings
- Remove color data pointer from generic mtk_ddp_comp
- Remove "drm/mediatek: add mipi_tx data rate check" from the patch series
- Remove "drm/mediatek: add dsi ulp mode control" from the patch series
- Update descriptions for "drm/mediatek: add non-continuous clock mode and EOT packet control"
- Fix DSI disable flow
Changes since v9:
- Split DSI patches into smaller parts
- Use a real linux errno for return value
- Add error handling in mtk_output_dsi_enable()
- Remove unused changes and redundant delays
- Add helpers and macros for configuration
- Combine "drm/mediatek: rename macros, add chip prefix" and "drm/mediatek: add *driver_data for different hardware setting"
Changes since v8:
- enable 3 DSI interrupts only
- move mtk_dsi_wait_for_irq_done() to the patch of irq control
- use the name BLS in DRM driver part
- move BLS declaration to a separate patch
- update mtk_dsi_switch_to_cmd_mode()
- update mtk_output_dsi_enable() and mtk_output_dsi_disable()
Changes since v7:
- Remove redundant codes
- Move the definition of DDP_COMPONENT_BLS to patch of "drm/mediatek: update display module connections"
- Move _dsi_irq_wait_queue into platform driver data
- Move mtk_dsi_irq_data_clear() to patch of "drm/mediatek: add dsi interrupt control"
- Add more descriptions in the commit messages
Changes since v6:
- Change data type of irq_data to u32
- Rewrite mtk_dsi_host_transfer() for simplify
- Move some MIPI_TX config to patch of "drm/mediatek: add *driver_data for different hardware settings".
- Remove device tree from this patch series
Changes since v5:
- Remove DPI device tree and compatible string
- Use one wait queue to handle interrupt status
- Update the interrupt check flow and DSI_INT_ALL_BITS
- Use same function for host read/write command
- various fixes
Changes since v4:
- Add messages when timeout in mtk_disp_mutex_acquire()
- Add descriptions for DISP_REG_MUTEX registers
- Move connection settings for display modules to a separate patch
- Remove 'mt2701-disp-wdma' because it is unused
- Move cleaning up and renaming to a separate patch
- Use wait_event_interruptible_timeout() to replace polling
- Remove irq_num from mtk_dsi structure
- Remove redundant and debug codes
Changes since v3:
- Add DSI support for MIPI DSI panels
- Update BLS binding to PWM nodes
- Remove ufoe device nodes
- Remove redundant parentheses
- Remove global variable initialization
Changes since v2:
- Rename mtk_ddp_mux_sel to mtk_ddp_sout_sel
- Update mt2701_mtk_ddp_ext components
- Changed to prefix naming
- Reorder the patch series
- Use of_device_get_match_data() to get driver private data
- Use iopoll macros to implement mtk_disp_mutex_acquire()
- Removed empty device tree nodes
Changes since v1:
- Removed BLS bindings and codes, which belong to pwm driver
- Moved mtk_disp_mutex_acquire() just before mtk_crtc_ddp_config()
- Split patch into smaller parts
- Added const keyword to constant structure
- Removed codes for special memory align
Thanks,
yt.shen
YT Shen (10):
dt-bindings: display: mediatek: update supported chips
drm/mediatek: add helpers for coverting from the generic components
drm/mediatek: add *driver_data for different hardware settings
drm/mediatek: add shadow register support
drm/mediatek: add BLS component
drm/mediatek: update display module connections
drm/mediatek: cleaning up and refine
drm/mediatek: add non-continuous clock mode and EOT packet control
drm/mediatek: update DSI sub driver flow for sending commands to panel
drm/mediatek: add support for Mediatek SoC MT2701
shaoming chen (2):
drm/mediatek: add dsi interrupt control
drm/mediatek: add dsi transfer function
.../bindings/display/mediatek/mediatek,disp.txt | 2 +
.../bindings/display/mediatek/mediatek,dsi.txt | 2 +
drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 64 ++-
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 39 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 75 +--
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 138 +++--
drivers/gpu/drm/mediatek/mtk_drm_ddp.h | 2 +
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 69 ++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 2 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 54 +-
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 9 +
drivers/gpu/drm/mediatek/mtk_dsi.c | 572 ++++++++++++++++-----
drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 38 +-
13 files changed, 828 insertions(+), 238 deletions(-)
--
1.9.1
Powered by blists - more mailing lists