[<prev] [next>] [day] [month] [year] [list]
Message-Id: <fba7548363a0a3300bdc28679da8bd7bae91b24e.1490959712.git.jpinto@synopsys.com>
Date: Fri, 31 Mar 2017 12:48:00 +0100
From: Joao Pinto <Joao.Pinto@...opsys.com>
To: davem@...emloft.net
Cc: niklas.cassel@...s.com, linux-kernel@...r.kernel.org,
Joao Pinto <Joao.Pinto@...opsys.com>
Subject: [PATCH] net: stmmac: fix cbs configuration
The QoS IP does not accept AVB capabilities to default/queue 0, this way we
guarantee 75% bandwidth for AVB. This patch assures that only queues >= 1
gets CBS confgured. Additional info was also added to stmmac.txt.
Reported-by: Niklas Cassel <niklas.cassel@...s.com>
Signed-off-by: Joao Pinto <jpinto@...opsys.com>
---
Documentation/devicetree/bindings/net/stmmac.txt | 2 ++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 784d988..f652b0c 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -103,6 +103,8 @@ Optional properties:
- Choose one of these modes:
- snps,dcb-algorithm: TX queue will be working in DCB
- snps,avb-algorithm: TX queue will be working in AVB
+ [Attention] Queue 0 is reserved for legacy traffic
+ and so no AVB is available in this queue.
- Configure Credit Base Shaper (if AVB Mode selected):
- snps,send_slope: enable Low Power Interface
- snps,idle_slope: unlock on WoL
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 43361f3..c1c6319 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1880,7 +1880,8 @@ static void stmmac_configure_cbs(struct stmmac_priv *priv)
u32 mode_to_use;
u32 queue;
- for (queue = 0; queue < tx_queues_count; queue++) {
+ /* queue 0 is reserved for legacy traffic */
+ for (queue = 1; queue < tx_queues_count; queue++) {
mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;
if (mode_to_use == MTL_QUEUE_DCB)
continue;
--
2.9.3
Powered by blists - more mailing lists