| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170331152250.12758-2-ludovic.desroches@microchip.com>
Date: Fri, 31 Mar 2017 17:22:47 +0200
From: Ludovic Desroches <ludovic.desroches@...rochip.com>
To: <linux-input@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>
CC: <dmitry.torokhov@...il.com>, <nicolas.ferre@...rochip.com>,
<alexandre.belloni@...e-electrons.com>,
<linux-kernel@...r.kernel.org>,
Ludovic Desroches <ludovic.desroches@...el.com>
Subject: [PATCH 1/4] input: misc: introduce Atmel PTC driver
From: Ludovic Desroches <ludovic.desroches@...el.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@...el.com>
---
drivers/input/misc/Kconfig | 12 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/atmel_ptc.c | 651 +++++++++++++++++++++++++++++++++++++++++
include/uapi/linux/atmel_ptc.h | 355 ++++++++++++++++++++++
4 files changed, 1019 insertions(+)
create mode 100644 drivers/input/misc/atmel_ptc.c
create mode 100644 include/uapi/linux/atmel_ptc.h
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5b6c522..aec7b8f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -96,6 +96,18 @@ config INPUT_ATMEL_CAPTOUCH
To compile this driver as a module, choose M here: the
module will be called atmel_captouch.
+config INPUT_ATMEL_PTC
+ tristate "Atmel PTC Driver"
+ depends on OF || COMPILE_TEST
+ depends on SOC_SAMA5D2
+ help
+ Say Y to enable support for the Atmel PTC Subsystem.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atmel_ptc.
+ If you compile it as a built-in driver, you have to build the
+ firmware into the kernel or to use an initrd.
+
config INPUT_BMA150
tristate "BMA150/SMB380 acceleration sensor support"
depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index b10523f..9470ec7 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o
+obj-$(CONFIG_INPUT_ATMEL_PTC) += atmel_ptc.o
obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o
obj-$(CONFIG_INPUT_BMA150) += bma150.o
obj-$(CONFIG_INPUT_CM109) += cm109.o
diff --git a/drivers/input/misc/atmel_ptc.c b/drivers/input/misc/atmel_ptc.c
new file mode 100644
index 0000000..44df1bf
--- /dev/null
+++ b/drivers/input/misc/atmel_ptc.c
@@ -0,0 +1,651 @@
+/*
+ * Atmel PTC subsystem driver for SAMA5D2 devices and compatible.
+ *
+ * Copyright (C) 2017 Microchip,
+ * 2017 Ludovic Desroches <ludovic.desroches@...rochip.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/cdev.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#include <uapi/linux/atmel_ptc.h>
+
+#define ATMEL_QTM_MB_OFFSET 0x4000
+
+/* ----- PPP REGISTERS ----- */
+#define ATMEL_PPP_CONFIG 0x20
+#define ATMEL_PPP_CTRL 0x24
+#define ATMEL_PPP_CMD 0x28
+#define ATMEL_PPP_CMD_STOP 0x1
+#define ATMEL_PPP_CMD_RESET 0x2
+#define ATMEL_PPP_CMD_RESTART 0x3
+#define ATMEL_PPP_CMD_ABORT 0x4
+#define ATMEL_PPP_CMD_RUN 0x5
+#define ATMEL_PPP_CMD_RUN_LOCKED 0x6
+#define ATMEL_PPP_CMD_RUN_OCD 0x7
+#define ATMEL_PPP_CMD_UNLOCK 0x8
+#define ATMEL_PPP_CMD_NMI 0x9
+#define ATMEL_PPP_CMD_HOST_OCD_RESUME 0xB
+#define ATMEL_PPP_ISR 0x33
+#define ATMEL_PPP_IRQ_MASK GENMASK(7, 4)
+#define ATMEL_PPP_IRQ0 BIT(4)
+#define ATMEL_PPP_IRQ1 BIT(5)
+#define ATMEL_PPP_IRQ2 BIT(6)
+#define ATMEL_PPP_IRQ3 BIT(7)
+#define ATMEL_PPP_NOTIFY_MASK GENMASK(3, 0)
+#define ATMEL_PPP_NOTIFY0 BIT(0)
+#define ATMEL_PPP_NOTIFY1 BIT(1)
+#define ATMEL_PPP_NOTIFY2 BIT(2)
+#define ATMEL_PPP_NOTIFY3 BIT(3)
+#define ATMEL_PPP_IDR 0x34
+#define ATMEL_PPP_IER 0x35
+
+#define PPP_FIRMWARE_NAME "atmel_ptc.bin"
+#define QTM_CONF_NAME "atmel_ptc.conf"
+
+#define atmel_ppp_readb(ptc, reg) readb_relaxed(ptc->ppp_regs + reg)
+#define atmel_ppp_writeb(ptc, reg, val) writeb_relaxed(val, ptc->ppp_regs + reg)
+#define atmel_ppp_readl(ptc, reg) readl_relaxed(ptc->ppp_regs + reg)
+#define atmel_ppp_writel(ptc, reg, val) writel_relaxed(val, ptc->ppp_regs + reg)
+
+#define get_scroller_resolution(ptc, scroller_id) \
+ (1 << (ptc->qtm_mb->scroller_config[i].resol_deadband >> 4))
+
+struct atmel_ptc {
+ void __iomem *ppp_regs;
+ void __iomem *firmware;
+ int irq;
+ uint8_t imr;
+ volatile struct atmel_qtm_mailbox __iomem *qtm_mb;
+ struct clk *clk_per;
+ struct clk *clk_int_osc;
+ struct clk *clk_slow;
+ struct device *dev;
+ struct completion ppp_ack;
+ unsigned int button_keycode[ATMEL_PTC_MAX_NODES];
+ struct input_dev *buttons_input;
+ struct input_dev *scroller_input[ATMEL_PTC_MAX_SCROLLERS];
+ bool buttons_registered;
+ bool scroller_registered[ATMEL_PTC_MAX_SCROLLERS];
+ uint32_t button_event[ATMEL_PTC_MAX_NODES/32];
+ uint32_t button_state[ATMEL_PTC_MAX_NODES/32];
+ uint32_t scroller_event;
+ uint32_t scroller_state;
+};
+
+static void atmel_ppp_irq_enable(struct atmel_ptc *ptc, uint8_t mask)
+{
+ ptc->imr |= mask;
+ atmel_ppp_writeb(ptc, ATMEL_PPP_IER, mask & ATMEL_PPP_IRQ_MASK);
+}
+
+static void atmel_ppp_irq_disable(struct atmel_ptc *ptc, uint8_t mask)
+{
+ ptc->imr &= ~mask;
+ atmel_ppp_writeb(ptc, ATMEL_PPP_IDR, mask & ATMEL_PPP_IRQ_MASK);
+}
+
+static void atmel_ppp_notify(struct atmel_ptc *ptc, uint8_t mask)
+{
+ if (mask & ATMEL_PPP_NOTIFY_MASK) {
+ uint8_t notify = atmel_ppp_readb(ptc, ATMEL_PPP_ISR)
+ | (mask & ATMEL_PPP_NOTIFY_MASK);
+
+ atmel_ppp_writeb(ptc, ATMEL_PPP_ISR, notify);
+ }
+}
+
+static void atmel_ppp_irq_pending_clr(struct atmel_ptc *ptc, uint8_t mask)
+{
+ if (mask & ATMEL_PPP_IRQ_MASK) {
+ uint8_t irq = atmel_ppp_readb(ptc, ATMEL_PPP_ISR) & ~mask;
+
+ atmel_ppp_writeb(ptc, ATMEL_PPP_ISR, irq);
+ }
+}
+
+static void atmel_ppp_cmd_send(struct atmel_ptc *ptc, uint32_t cmd)
+{
+ atmel_ppp_writel(ptc, ATMEL_PPP_CMD, cmd);
+}
+
+static void atmel_ppp_irq_scroller_event(struct atmel_ptc *ptc)
+{
+ int i;
+
+ if (!ptc->scroller_event)
+ return;
+
+ for (i = 0; i < ATMEL_PTC_MAX_SCROLLERS; i++) {
+ uint32_t mask = 1 << i;
+ uint8_t status;
+ uint16_t position;
+
+ if (!(ptc->scroller_event & mask))
+ continue;
+
+ status = ptc->qtm_mb->scroller_data[i].status;
+ position = ptc->qtm_mb->scroller_data[i].position;
+
+ if (ptc->qtm_mb->scroller_config[i].type ==
+ QTM_SCROLLER_TYPE_WHEEL)
+ input_report_abs(ptc->scroller_input[i],
+ ABS_WHEEL, position);
+ else
+ input_report_abs(ptc->scroller_input[i],
+ ABS_X, position);
+
+ input_report_key(ptc->scroller_input[i], BTN_TOUCH, status & 0x1);
+ input_sync(ptc->scroller_input[i]);
+ }
+}
+
+static void atmel_ppp_irq_button_event(struct atmel_ptc *ptc)
+{
+ int i, j;
+
+ for (i = 0; i < ATMEL_PTC_MAX_NODES / 32; i++) {
+ if (!ptc->button_event[i])
+ continue;
+
+ for (j = 0; j < 32; j++) {
+ uint32_t mask = 1 << j;
+ uint32_t state = ptc->button_state[i] & mask;
+ unsigned int key_id = i * 32 + j;
+
+ if (!(ptc->button_event[i] & mask))
+ continue;
+
+ input_report_key(ptc->buttons_input,
+ ptc->button_keycode[key_id], !!state);
+ input_sync(ptc->buttons_input);
+ }
+ }
+}
+
+static void atmel_ppp_irq_touch_event(struct atmel_ptc *ptc)
+{
+ atmel_ppp_irq_scroller_event(ptc);
+ atmel_ppp_irq_button_event(ptc);
+}
+
+static irqreturn_t atmel_ppp_irq_handler(int irq, void *data)
+{
+ struct atmel_ptc *ptc = data;
+ uint32_t isr = atmel_ppp_readb(ptc, ATMEL_PPP_ISR) & ptc->imr;
+
+ /* QTM CMD acknowledgment */
+ if (isr & ATMEL_PPP_IRQ0) {
+ atmel_ppp_irq_disable(ptc, ATMEL_PPP_IRQ0);
+ atmel_ppp_irq_pending_clr(ptc, ATMEL_PPP_IRQ0);
+ complete(&ptc->ppp_ack);
+ }
+ /* QTM touch event */
+ if (isr & ATMEL_PPP_IRQ1) {
+ int i;
+
+ for (i = 0; i < ATMEL_PTC_MAX_NODES / 32; i++) {
+ ptc->button_event[i] = ptc->qtm_mb->touch_events.key_event_id[i];
+ ptc->button_state[i] = ptc->qtm_mb->touch_events.key_enable_state[i];
+ }
+ ptc->scroller_event = ptc->qtm_mb->touch_events.scroller_event_id;
+ ptc->scroller_state = ptc->qtm_mb->touch_events.scroller_event_state;
+
+ atmel_ppp_irq_pending_clr(ptc, ATMEL_PPP_IRQ1);
+
+ atmel_ppp_irq_touch_event(ptc);
+ }
+ /* Debug event */
+ if (isr & ATMEL_PPP_IRQ2) {
+ atmel_ppp_irq_pending_clr(ptc, ATMEL_PPP_IRQ2);
+ }
+
+ return IRQ_HANDLED;
+}
+
+uint32_t atmel_qtm_cmd_send(struct atmel_ptc *ptc, struct atmel_qtm_cmd *cmd)
+{
+ int i, ret;
+
+ dev_dbg(ptc->dev, "%s: cmd=0x%x, addr=0x%x, data=0x%x\n",
+ __func__, cmd->id, cmd->addr, cmd->data);
+
+ ptc->qtm_mb->cmd.id = cmd->id;
+ ptc->qtm_mb->cmd.addr = cmd->addr;
+ ptc->qtm_mb->cmd.data = cmd->data;
+
+ /* Once command performed, we'll get an IRQ. */
+ atmel_ppp_irq_enable(ptc, ATMEL_PPP_IRQ0);
+ /* Notify PPP that we have sent a command. */
+ atmel_ppp_notify(ptc, ATMEL_PPP_NOTIFY0);
+ /* Wait for IRQ from PPP. */
+ wait_for_completion(&ptc->ppp_ack);
+
+ /*
+ * Register input devices only when QTM is started since we need some
+ * information from the QTM configuration.
+ */
+ if (cmd->id == QTM_CMD_RUN) {
+ if (ptc->buttons_input && !ptc->buttons_registered) {
+ ret = input_register_device(ptc->buttons_input);
+ if (ret)
+ dev_err(ptc->dev, "can't register input button device.\n");
+ else
+ ptc->buttons_registered = true;
+ }
+
+ for (i = 0; i < ATMEL_PTC_MAX_SCROLLERS; i++) {
+ struct input_dev *scroller = ptc->scroller_input[i];
+
+ if (!scroller || ptc->scroller_registered[i])
+ continue;
+ if (ptc->qtm_mb->scroller_config[i].type ==
+ QTM_SCROLLER_TYPE_SLIDER) {
+ unsigned int max = get_scroller_resolution(ptc, i);
+
+ input_set_abs_params(scroller, 0, 0, max, 0, 0);
+ }
+ ret = input_register_device(scroller);
+ if (ret)
+ dev_err(ptc->dev, "can't register input scroller device.\n");
+ else
+ ptc->scroller_registered[i] = true;
+ }
+ }
+
+ return ptc->qtm_mb->cmd.data;
+}
+
+static inline struct atmel_ptc *kobj_to_atmel_ptc(struct kobject *kobj)
+{
+ struct device *dev = kobj_to_dev(kobj);
+
+ return dev->driver_data;
+}
+
+static ssize_t atmel_qtm_mb_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct atmel_ptc *ptc = kobj_to_atmel_ptc(kobj);
+ char *qtm_mb = (char *)ptc->qtm_mb;
+
+ dev_dbg(ptc->dev, "%s: off=0x%llx, count=%zu\n", __func__, off, count);
+
+ memcpy(buf, qtm_mb + off, count);
+
+ return count;
+}
+
+static ssize_t atmel_qtm_mb_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct atmel_ptc *ptc = kobj_to_atmel_ptc(kobj);
+ char *qtm_mb = (char *)ptc->qtm_mb;
+
+ dev_dbg(ptc->dev, "%s: off=0x%llx, count=%zu\n", __func__, off, count);
+
+ if (off == 0 && count == sizeof(struct atmel_qtm_cmd))
+ atmel_qtm_cmd_send(ptc, (struct atmel_qtm_cmd *)buf);
+ else
+ memcpy(qtm_mb + off, buf, count);
+
+ return count;
+}
+
+static struct bin_attribute atmel_ptc_qtm_mb_attr = {
+ .attr = {
+ .name = "qtm_mb",
+ .mode = 0644,
+ },
+ .size = sizeof(struct atmel_qtm_mailbox),
+ .read = atmel_qtm_mb_read,
+ .write = atmel_qtm_mb_write,
+};
+
+/*
+ * From QTM MB configuration, we can't retrieve all the information needed
+ * to setup correctly input devices: buttons key codes and slider axis are
+ * missing.
+ */
+static int atmel_ptc_of_parse(struct atmel_ptc *ptc)
+{
+ struct device_node *sensor;
+ bool first_button = true;
+
+ /* Parse sensors. */
+ for_each_child_of_node(ptc->dev->of_node, sensor) {
+ if (!strcmp(sensor->name, "button")) {
+ uint32_t key_id, keycode;
+ struct input_dev *buttons = ptc->buttons_input;
+
+ if (of_property_read_u32(sensor, "reg", &key_id)) {
+ dev_err(ptc->dev, "reg is missing (%s)\n",
+ sensor->full_name);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(sensor, "linux,keycode", &keycode)) {
+ dev_err(ptc->dev, "linux,keycode is missing (%s)\n",
+ sensor->full_name);
+ return -EINVAL;
+ }
+ ptc->button_keycode[key_id] = keycode;
+
+ /* All buttons are put together in a keyboard device. */
+ if (first_button) {
+ buttons = devm_input_allocate_device(ptc->dev);
+ if (!buttons)
+ return -ENOMEM;
+ buttons->name = "atmel_ptc_buttons";
+ buttons->dev.parent = ptc->dev;
+ buttons->keycode = ptc->button_keycode;
+ buttons->keycodesize = sizeof(ptc->button_keycode[0]);
+ buttons->keycodemax = ATMEL_PTC_MAX_NODES;
+ ptc->buttons_input = buttons;
+ first_button = false;
+ }
+
+ input_set_capability(buttons, EV_KEY, keycode);
+ } else if (!strcmp(sensor->name, "slider") ||
+ !strcmp(sensor->name, "wheel")) {
+ uint32_t scroller_id;
+ struct input_dev *scroller;
+
+ if (of_property_read_u32(sensor, "reg", &scroller_id)) {
+ dev_err(ptc->dev, "reg is missing (%s)\n",
+ sensor->full_name);
+ return -EINVAL;
+ }
+
+ if (scroller_id > ATMEL_PTC_MAX_SCROLLERS - 1) {
+ dev_err(ptc->dev, "wrong scroller id (%s)\n",
+ sensor->full_name);
+ return -EINVAL;
+ }
+
+ scroller = devm_input_allocate_device(ptc->dev);
+ if (!scroller)
+ return -ENOMEM;
+
+ scroller->dev.parent = ptc->dev;
+ ptc->scroller_input[scroller_id] = scroller;
+
+ if (!strcmp(sensor->name, "slider")) {
+ scroller->name = "atmel_ptc_slider";
+ input_set_capability(scroller, EV_ABS, ABS_X);
+ input_set_capability(scroller, EV_KEY, BTN_TOUCH);
+ } else {
+ scroller->name = "atmel_ptc_wheel";
+ input_set_capability(scroller, EV_ABS, ABS_WHEEL);
+ input_set_capability(scroller, EV_KEY, BTN_TOUCH);
+ }
+ } else {
+ dev_err(ptc->dev, "%s is not supported\n", sensor->name);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void atmel_qtm_conf_callback(const struct firmware *conf, void *context)
+{
+ struct atmel_ptc *ptc = context;
+ unsigned int qtm_conf_size = sizeof(struct atmel_qtm_mailbox)
+ - offsetof(struct atmel_qtm_mailbox, node_group_config);
+ struct atmel_qtm_cmd qtm_cmd;
+ char *dst;
+
+ if (!conf) {
+ dev_err(ptc->dev, "cannot load QTM configuration, "
+ "it has to be set manually.\n");
+ return;
+ }
+
+ if (!conf->size || conf->size != qtm_conf_size) {
+ dev_err(ptc->dev, "incorrect QTM configuration file (size must be %u bytes), "
+ "configuration has to be set manually.\n", qtm_conf_size);
+ return;
+ }
+
+ atmel_ppp_irq_enable(ptc, ATMEL_PPP_IRQ1);
+ atmel_ppp_irq_disable(ptc, ATMEL_PPP_IRQ2 | ATMEL_PPP_IRQ3);
+
+ qtm_cmd.id = QTM_CMD_STOP;
+ atmel_qtm_cmd_send(ptc, &qtm_cmd);
+
+ /* Load QTM configuration. */
+ dst = (char *)ptc->qtm_mb +
+ offsetof(struct atmel_qtm_mailbox, node_group_config);
+ _memcpy_toio(dst, conf->data, qtm_conf_size);
+ release_firmware(conf);
+
+ if (atmel_ptc_of_parse(ptc))
+ dev_err(ptc->dev, "ptc_of_parse failed\n");
+
+ /* Start QTM. */
+ qtm_cmd.id = QTM_CMD_INIT;
+ qtm_cmd.data = ptc->qtm_mb->node_group_config.count;
+ atmel_qtm_cmd_send(ptc, &qtm_cmd);
+ qtm_cmd.id = QTM_CMD_SET_ACQ_MODE_TIMER;
+ qtm_cmd.data = 20;
+ atmel_qtm_cmd_send(ptc, &qtm_cmd);
+ qtm_cmd.id = QTM_CMD_RUN;
+ qtm_cmd.data = ptc->qtm_mb->node_group_config.count;
+ atmel_qtm_cmd_send(ptc, &qtm_cmd);
+}
+
+static void atmel_ppp_fw_callback(const struct firmware *fw, void *context)
+{
+ struct atmel_ptc *ptc = context;
+ int ret;
+ uint32_t firm_version;
+ struct atmel_qtm_cmd cmd;
+
+ if (!fw || !fw->size) {
+ dev_err(ptc->dev, "cannot load firmware.\n");
+ release_firmware(fw);
+ device_release_driver(ptc->dev);
+ return;
+ }
+
+ /* Command sequence to start from a clean state. */
+ atmel_ppp_cmd_send(ptc, ATMEL_PPP_CMD_ABORT);
+ atmel_ppp_irq_pending_clr(ptc, ATMEL_PPP_IRQ_MASK);
+ atmel_ppp_cmd_send(ptc, ATMEL_PPP_CMD_RESET);
+
+ _memcpy_toio(ptc->firmware, fw->data, fw->size);
+ release_firmware(fw);
+
+ atmel_ppp_cmd_send(ptc, ATMEL_PPP_CMD_RUN);
+
+ cmd.id = QTM_CMD_FIRM_VERSION;
+ firm_version = atmel_qtm_cmd_send(ptc, &cmd);
+ dev_info(ptc->dev, "firmware version: %u\n", firm_version);
+
+ /* PPP is running, it's time to load the QTM configuration. */
+ ret = request_firmware_nowait(THIS_MODULE, 1, QTM_CONF_NAME, ptc->dev,
+ GFP_KERNEL, ptc, atmel_qtm_conf_callback);
+ if (ret)
+ dev_err(ptc->dev, "QTM configuration loading failed.\n");
+}
+
+static int atmel_ptc_probe(struct platform_device *pdev)
+{
+ struct atmel_ptc *ptc;
+ struct resource *res;
+ void *shared_memory;
+ int ret;
+
+ ptc = devm_kzalloc(&pdev->dev, sizeof(*ptc), GFP_KERNEL);
+ if (!ptc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ptc);
+ ptc->dev = &pdev->dev;
+ ptc->dev->driver_data = ptc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ shared_memory = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(shared_memory))
+ return PTR_ERR(shared_memory);
+
+ ptc->firmware = shared_memory;
+ ptc->qtm_mb = shared_memory + ATMEL_QTM_MB_OFFSET;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res)
+ return -EINVAL;
+
+ ptc->ppp_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ptc->ppp_regs))
+ return PTR_ERR(ptc->ppp_regs);
+
+ ptc->irq = platform_get_irq(pdev, 0);
+ if (ptc->irq <= 0) {
+ if (!ptc->irq)
+ ptc->irq = -ENXIO;
+
+ return ptc->irq;
+ }
+
+ ptc->clk_per = devm_clk_get(&pdev->dev, "ptc_clk");
+ if (IS_ERR(ptc->clk_per))
+ return PTR_ERR(ptc->clk_per);
+
+ ptc->clk_int_osc = devm_clk_get(&pdev->dev, "ptc_int_osc");
+ if (IS_ERR(ptc->clk_int_osc))
+ return PTR_ERR(ptc->clk_int_osc);
+
+ ptc->clk_slow = devm_clk_get(&pdev->dev, "slow_clk");
+ if (IS_ERR(ptc->clk_slow))
+ return PTR_ERR(ptc->clk_slow);
+
+ ret = devm_request_irq(&pdev->dev, ptc->irq, atmel_ppp_irq_handler, 0,
+ pdev->dev.driver->name, ptc);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(ptc->clk_int_osc);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(ptc->clk_per);
+ if (ret)
+ goto disable_clk_int_osc;
+
+ ret = clk_prepare_enable(ptc->clk_slow);
+ if (ret)
+ goto disable_clk_per;
+
+ /* Needed to avoid unexpected behaviors. */
+ memset(ptc->firmware, 0, ATMEL_QTM_MB_OFFSET + sizeof(*ptc->qtm_mb));
+ ptc->imr = 0;
+ init_completion(&ptc->ppp_ack);
+
+ /*
+ * Expose a file to give an access to the QTM mailbox to a user space
+ * application in order to configure it or to send commands.
+ */
+ ret = sysfs_create_bin_file(&pdev->dev.kobj, &atmel_ptc_qtm_mb_attr);
+ if (ret)
+ goto disable_clk_slow;
+
+ ret = request_firmware_nowait(THIS_MODULE, 1, PPP_FIRMWARE_NAME,
+ ptc->dev, GFP_KERNEL, ptc,
+ atmel_ppp_fw_callback);
+ if (ret) {
+ dev_err(&pdev->dev, "firmware loading failed\n");
+ ret = -EPROBE_DEFER;
+ goto remove_qtm_mb;
+ }
+
+ return 0;
+
+remove_qtm_mb:
+ sysfs_remove_bin_file(&pdev->dev.kobj, &atmel_ptc_qtm_mb_attr);
+disable_clk_slow:
+ clk_disable_unprepare(ptc->clk_slow);
+disable_clk_per:
+ clk_disable_unprepare(ptc->clk_per);
+disable_clk_int_osc:
+ clk_disable_unprepare(ptc->clk_int_osc);
+
+ return ret;
+}
+
+static int atmel_ptc_remove(struct platform_device *pdev)
+{
+ struct atmel_ptc *ptc = platform_get_drvdata(pdev);
+ int i;
+
+ if (ptc->buttons_registered)
+ input_unregister_device(ptc->buttons_input);
+
+ for (i = 0; i < ATMEL_PTC_MAX_SCROLLERS; i++) {
+ struct input_dev *scroller = ptc->scroller_input[i];
+
+ if (!scroller || !ptc->scroller_registered[i])
+ continue;
+ input_unregister_device(scroller);
+ }
+
+ sysfs_remove_bin_file(&pdev->dev.kobj, &atmel_ptc_qtm_mb_attr);
+ clk_disable_unprepare(ptc->clk_slow);
+ clk_disable_unprepare(ptc->clk_per);
+ clk_disable_unprepare(ptc->clk_int_osc);
+
+ return 0;
+}
+
+static const struct of_device_id atmel_ptc_dt_match[] = {
+ {
+ .compatible = "atmel,sama5d2-ptc",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, atmel_ptc_dt_match);
+
+static struct platform_driver atmel_ptc_driver = {
+ .probe = atmel_ptc_probe,
+ .remove = atmel_ptc_remove,
+ .driver = {
+ .name = "atmel_ptc",
+ .of_match_table = atmel_ptc_dt_match,
+ },
+};
+module_platform_driver(atmel_ptc_driver)
+
+MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@...rochip.com>");
+MODULE_DESCRIPTION("Atmel PTC subsystem");
+MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(PPP_FIRMWARE_NAME);
+MODULE_FIRMWARE(QTM_CONF_NAME);
diff --git a/include/uapi/linux/atmel_ptc.h b/include/uapi/linux/atmel_ptc.h
new file mode 100644
index 0000000..d15c4df
--- /dev/null
+++ b/include/uapi/linux/atmel_ptc.h
@@ -0,0 +1,355 @@
+/*
+ * Atmel PTC subsystem driver for SAMA5D2 devices and compatible.
+ *
+ * Copyright (C) 2017 Microchip,
+ * 2017 Ludovic Desroches <ludovic.desroches@...rochip.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_ATMEL_PTC_H
+#define _LINUX_ATMEL_PTC_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+#define ATMEL_PTC_MAX_NODES 64
+#define ATMEL_PTC_MAX_SCROLLERS 4
+
+enum atmel_qtm_command {
+ QTM_CMD_FIRM_VERSION = 8,
+ QTM_CMD_ACQ = 17,
+ QTM_CMD_INIT = 18,
+ QTM_CMD_RUN = 19,
+ QTM_CMD_STATUS = 20,
+ QTM_CMD_STOP = 21,
+ QTM_CMD_UPDATE_TOUCH_CFG = 22,
+ QTM_CMD_SET_ACQ_MODE_ON_DEMAND = 23,
+ QTM_CMD_SET_ACQ_MODE_TIMER = 24,
+ QTM_CMD_SET_ACQ_MODE_WCOMP = 25,
+ QTM_CMD_SET_TIMER_INTERVAL = 26,
+ QTM_CMD_STOP_TIMER = 27,
+ QTM_CMD_START_TIMER = 28,
+ QTM_CMD_RESET = 29,
+};
+
+enum atmel_ptc_type {
+ PTC_TYPE_MUTUAL = 0x40,
+ PTC_TYPE_SELFCAP = 0x80,
+};
+
+enum atmel_ptc_scroller_type {
+ QTM_SCROLLER_TYPE_SLIDER,
+ QTM_SCROLLER_TYPE_WHEEL,
+};
+
+enum atmel_ptc_scan {
+ PTC_SCAN_EXTINT_0 = 1,
+ PTC_SCAN_TC2_COMPA = 2,
+ PTC_SCAN_TC2_OVF = 3,
+ PTC_SCAN_4MS = 8,
+ PTC_SCAN_8MS = 9,
+ PTC_SCAN_16MS = 10,
+ PTC_SCAN_32MS = 11,
+ PTC_SCAN_64MS = 12,
+ PTC_SCAN_128MS = 13,
+ PTC_SCAN_256MS = 14,
+};
+
+enum atmel_ptc_cal_charge {
+ PTC_CAL_CHRG_2TAU,
+ PTC_CAL_CHRG_3TAU,
+ PTC_CAL_CHRG_4TAU,
+ PTC_CAL_CHRG_5TAU,
+};
+
+enum atmel_ptc_cal_auto_tune {
+ PTC_CAL_AUTO_TUNE_NONE,
+ PTC_CAL_AUTO_TUNE_RSEL,
+ PTC_CAL_AUTO_TUNE_PRSC,
+ PTC_CAL_AUTO_TUNE_CSD,
+};
+
+enum atmel_qtm_key_state {
+ QTM_KEY_STATE_DISABLE,
+ QTM_KEY_STATE_INIT,
+ QTM_KEY_STATE_CAL,
+ QTM_KEY_STATE_NO_DET,
+ QTM_KEY_STATE_FILT_IN,
+ QTM_KEY_STATE_ANTI_TCH,
+ QTM_KEY_STATE_SUSPEND,
+ QTM_KEY_STATE_DETECT = 133,
+ QTM_KEY_STATE_FILT_OUT,
+};
+
+/*
+ * PTC acquisition frequency delay setting.
+ *
+ * The PTC acquisition frequency is dependent on the Generic clock
+ * input to PTC and PTC clock prescaler setting. This delay setting
+ * inserts "n" PTC clock cycles between consecutive measurements on
+ * a given sensor, thereby changing the PTC acquisition frequency.
+ * FREQ_HOP_SEL_1 setting inserts 1 PTC clock cycle between consecutive
+ * measurements. FREQ_HOP_SEL_14 setting inserts 14 PTC clock cycles.
+ * Hence, higher delay setting will increase the total time taken for
+ * capacitance measurement on a given sensor as compared to a lower
+ * delay setting.
+ *
+ * A desired setting can be used to avoid noise around the same frequency
+ * as the acquisition frequency.
+ */
+enum atmel_ptc_freq_sel {
+ PTC_FREQ_SEL_0,
+ PTC_FREQ_SEL_1,
+ PTC_FREQ_SEL_2,
+ PTC_FREQ_SEL_3,
+ PTC_FREQ_SEL_4,
+ PTC_FREQ_SEL_5,
+ PTC_FREQ_SEL_6,
+ PTC_FREQ_SEL_7,
+ PTC_FREQ_SEL_8,
+ PTC_FREQ_SEL_9,
+ PTC_FREQ_SEL_10,
+ PTC_FREQ_SEL_11,
+ PTC_FREQ_SEL_12,
+ PTC_FREQ_SEL_13,
+ PTC_FREQ_SEL_14,
+ PTC_FREQ_SEL_15,
+ PTC_FREQ_SEL_SPREAD,
+};
+
+/*
+ * Series resistor setting. For Mutual cap mode, this series
+ * resistor is switched internally on the Y-pin. For Self cap mode,
+ * this series resistor is switched internally on the Sensor pin.
+ */
+enum atmel_ptc_rsel_val {
+ PTC_RSEL_0,
+ PTC_RSEL_20,
+ PTC_RSEL_50,
+ PTC_RSEL_100,
+};
+
+enum atmel_ptc_prsc_div_sel {
+ PTC_PRSC_DIV_1,
+ PTC_PRSC_DIV_2,
+ PTC_PRSC_DIV_4,
+ PTC_PRSC_DIV_8,
+};
+
+enum atmel_ptc_gain {
+ PTC_GAIN_1,
+ PTC_GAIN_2,
+ PTC_GAIN_4,
+ PTC_GAIN_8,
+ PTC_GAIN_16,
+ PTC_GAIN_32,
+};
+
+enum atmel_ptc_filter_level {
+ PTC_FILTER_LEVEL_1,
+ PTC_FILTER_LEVEL_2,
+ PTC_FILTER_LEVEL_4,
+ PTC_FILTER_LEVEL_8,
+ PTC_FILTER_LEVEL_16,
+ PTC_FILTER_LEVEL_32,
+ PTC_FILTER_LEVEL_64,
+};
+
+enum atmel_ptc_aks_group {
+ QTM_KEY_NO_AKS_GROUP,
+ QTM_KEY_AKS_GROUP_1,
+ QTM_KEY_AKS_GROUP_2,
+ QTM_KEY_AKS_GROUP_3,
+ QTM_KEY_AKS_GROUP_4,
+ QTM_KEY_AKS_GROUP_5,
+ QTM_KEY_AKS_GROUP_6,
+ QTM_KEY_AKS_GROUP_7,
+ MAX_QTM_KEY_AKS_GROUP,
+};
+
+enum atmel_ptc_key_hysteresis {
+ QTM_KEY_HYST_50,
+ QTM_KEY_HYST_25,
+ QTM_KEY_HYST_12_5,
+ QTM_KEY_HYST_6_25,
+ MAX_QTM_KEY_HYST,
+};
+
+enum atmel_ptc_key_recal_thr {
+ QTM_KEY_RECAL_THR_100,
+ QTM_KEY_RECAL_THR_50,
+ QTM_KEY_RECAL_THR_25,
+ QTM_KEY_RECAL_THR_12_5,
+ QTM_KEY_RECAL_THR_6_25,
+ MAX_QTM_KEY_RECAL_THR,
+};
+
+/*
+ * Reburst mode:
+ * 0 = none (application calls only)
+ * 1 = Unresolved - i.e. sensors in process of calibration / filter in / filter out and AKS groups
+ * 2 = All keys
+ */
+enum atmel_ptc_key_reburst {
+ QTM_KEY_REBURST_NONE,
+ QTM_KEY_REBURST_UNRESOLVED,
+ QTM_KEY_REBURST_ALL,
+};
+
+struct atmel_qtm_cmd {
+ uint16_t id;
+ uint16_t addr;
+ uint32_t data;
+} __attribute__ ((packed));
+
+struct atmel_qtm_node_group_config {
+ uint16_t count; /* Number of sensor nodes */
+ uint8_t ptc_type; /* Self or mutual sensors */
+ uint8_t freq_option; /* SDS or ASDV setting */
+ uint8_t calib_option; /* Hardware tuning: XX | TT 3/4/5 Tau | X | XX None/RSEL/PRSC/CSD */
+ uint8_t unused;
+} __attribute__ ((packed));
+
+struct atmel_qtm_node_config {
+ uint16_t mask_x; /* Selects the X Pins for this node (NONE for selfcapacitance configuration) */
+ uint32_t mask_y; /* Selects the Y Pins for this node */
+ uint8_t csd; /* Charge Share Delay */
+ uint8_t rsel; /* Resistor */
+ uint8_t prsc; /* Prescaler */
+ uint8_t gain_analog; /* Analog gain setting (Cint Selection) */
+ uint8_t gain_digital; /* Digital gain (Accum / Dec) */
+ uint8_t oversampling; /* Accumulator setting */
+} __attribute__ ((packed));
+
+struct atmel_qtm_node_data {
+ uint8_t status;
+ uint8_t unused;
+ uint16_t signals;
+ uint16_t comp_caps;
+} __attribute__ ((packed));
+
+struct atmel_qtm_key_config {
+ uint8_t threshold; /* Touch detection threshold */
+ uint8_t hysteresis; /* Percentage of threshold reduction to exit detect state */
+ uint8_t aks_group; /* 0 = None, 1-255 = group number */
+ uint8_t unused;
+} __attribute__ ((packed));
+
+struct atmel_qtm_key_group_config {
+ uint16_t count; /* Number of sensors */
+ uint8_t touch_di; /* Count in to Detect */
+ uint8_t max_on_time; /* Max on duration x 200ms */
+ uint8_t anti_touch_di; /* Count in to Anti-touch recal */
+ uint8_t anti_touch_recal_thr; /* Anti-touch recal threshold % */
+ uint8_t touch_drift_rate; /* One count per <200> ms */
+ uint8_t anti_touch_drift_rate; /* One count per <200> ms */
+ uint8_t drift_hold_time; /* Drift hold time */
+ uint8_t reburst_mode; /* None / Unresolved / All */
+} __attribute__ ((packed));
+
+struct atmel_qtm_key_data {
+ uint8_t status; /* Disabled, Off, On, Filter, Cal... */
+ uint8_t status_counter; /* State counter */
+ uint16_t node_struct_ptr; /* Pointer to node struct */
+ uint16_t reference; /* Reference signal */
+} __attribute__ ((packed));
+
+struct atmel_qtm_auto_scan_config {
+ uint16_t unused;
+ uint16_t node_number; /* Node Index that will be used */
+ uint8_t node_threshold;
+ uint8_t trigger;
+} __attribute__ ((packed));
+
+struct atmel_qtm_scroller_group_config {
+ uint16_t key_data;
+ uint8_t count;
+ uint8_t unused;
+} __attribute__ ((packed));
+
+struct atmel_qtm_scroller_config {
+ uint8_t type;
+ uint8_t unused;
+ uint16_t key_start;
+ uint8_t key_count;
+ uint8_t resol_deadband;
+ uint8_t position_hysteresis;
+ uint8_t unused2;
+ uint16_t contact_min_threshold;
+} __attribute__ ((packed));
+
+struct atmel_qtm_scroller_data {
+ uint8_t status;
+ uint8_t right_hyst;
+ uint8_t left_hyst;
+ uint8_t unused;
+ uint16_t raw_position;
+ uint16_t position;
+ uint16_t contact_size;
+} __attribute__ ((packed));
+
+struct atmel_qtm_fh_autotune_config {
+ uint8_t count; /* Number of sensors */
+ uint8_t num_freqs;
+ uint16_t freq_option_select;
+ uint16_t median_filter_freq; /* PTC frequencies to be used on the median filter samples */
+ uint8_t enable_freq_autotune;
+ uint8_t max_variance_limit;
+ uint8_t autotune_count_in_limit;
+ uint8_t unused;
+} __attribute__ ((packed));
+
+struct atmel_qtm_fh_autotune_data {
+ uint8_t status; /* Obligatory status byte: Bit 7 = Reburst... */
+ uint8_t current_freq; /* PTC Sampling Delay Selection - 0 to 15 PTC CLK cycles */
+ uint16_t filter_buffer; /* Filter buffer used to store past cycle signal values of sensor */
+ uint16_t acq_node_data;
+ uint16_t freq_tune_count_ins;
+} __attribute__ ((packed));
+
+struct atmel_qtm_fh_freq {
+ uint8_t freq0;
+ uint8_t freq1;
+ uint8_t freq2;
+ uint8_t unused;
+} __attribute__ ((packed));
+
+struct atmel_qtm_touch_events {
+ uint32_t key_event_id[2];
+ uint32_t key_enable_state[2];
+ uint32_t scroller_event_id;
+ uint32_t scroller_event_state;
+} __attribute__ ((packed));
+
+struct atmel_qtm_mailbox {
+ struct atmel_qtm_cmd cmd;
+ uint8_t unused[248];
+ struct atmel_qtm_node_group_config node_group_config;
+ struct atmel_qtm_node_config node_config[ATMEL_PTC_MAX_NODES];
+ struct atmel_qtm_node_data node_data[ATMEL_PTC_MAX_NODES];
+ struct atmel_qtm_key_group_config key_group_config;
+ struct atmel_qtm_key_config key_config[ATMEL_PTC_MAX_NODES];
+ struct atmel_qtm_key_data key_data[ATMEL_PTC_MAX_NODES];
+ struct atmel_qtm_auto_scan_config auto_scan_config;
+ struct atmel_qtm_scroller_group_config scroller_group_config;
+ struct atmel_qtm_scroller_config scroller_config[ATMEL_PTC_MAX_SCROLLERS];
+ struct atmel_qtm_scroller_data scroller_data[ATMEL_PTC_MAX_SCROLLERS];
+ struct atmel_qtm_fh_autotune_config fh_autotune_config;
+ struct atmel_qtm_fh_autotune_data fh_autotune_data;
+ struct atmel_qtm_fh_freq fh_freq;
+ struct atmel_qtm_touch_events touch_events;
+} __attribute__ ((packed));
+
+#endif /* _LINUX_ATMEL_PTC_H */
--
2.9.0
Powered by blists - more mailing lists