[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1491004256-13969-2-git-send-email-sergio.prado@e-labworks.com>
Date: Fri, 31 Mar 2017 20:50:55 -0300
From: Sergio Prado <sergio.prado@...abworks.com>
To: ulf.hansson@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, ben-linux@...ff.org,
linux-arm-kernel@...ts.infradead.org
Cc: Sergio Prado <sergio.prado@...abworks.com>
Subject: [PATCH v6 1/2] dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
Adds the device tree bindings description for Samsung S3C24XX
MMC/SD/SDIO controller, used as a connectivity interface with external
MMC, SD and SDIO storage mediums.
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Sergio Prado <sergio.prado@...abworks.com>
---
.../devicetree/bindings/mmc/samsung,s3cmci.txt | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
new file mode 100644
index 000000000000..5f68feb9f9d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
@@ -0,0 +1,42 @@
+* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
+
+Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
+with external MMC, SD and SDIO storage mediums.
+
+This file documents differences between the core mmc properties described by
+mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
+implementation.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
+ - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
+ - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
+- reg: register location and length
+- interrupts: mmc controller interrupt
+- clocks: Should reference the controller clock
+- clock-names: Should contain "sdi"
+
+Required Board Specific Properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Optional Properties:
+- bus-width: number of data lines (see mmc.txt)
+- cd-gpios: gpio for card detection (see mmc.txt)
+- wp-gpios: gpio for write protection (see mmc.txt)
+
+Example:
+
+ mmc0: mmc@...00000 {
+ compatible = "samsung,s3c2440-sdi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdi_pins>;
+ reg = <0x5a000000 0x100000>;
+ interrupts = <0 0 21 3>;
+ clocks = <&clocks PCLK_SDI>;
+ clock-names = "sdi";
+ bus-width = <4>;
+ cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
+ };
--
1.9.1
Powered by blists - more mailing lists