Date:   Sat, 1 Apr 2017 14:34:32 +0200 (CEST)
From:   Peter Meerwald-Stadler <pmeerw@...erw.net>
To:     Fabrice Gasnier <fabrice.gasnier@...com>
cc:     jic23@...nel.org, linux@...linux.org.uk,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-iio@...r.kernel.org, mcoquelin.stm32@...il.com,
        alexandre.torgue@...com, benjamin.gaignard@...aro.org,
        benjamin.gaignard@...com, linus.walleij@...aro.org,
        amelie.delaunay@...com
Subject: Re: [PATCH 2/4] iio: dac: add support for stm32 DAC

On Fri, 31 Mar 2017, Fabrice Gasnier wrote:

> Add support for STMicroelectronics STM32 DAC. It's a 12-bit, voltage
> output digital-to-analog converter. It has two output channels, each
> with its own converter.
> It supports 8 bits or 12bits left/right aligned data format. Only
> 12bits right-aligned is used here. It has built-in noise or
> triangle waveform generator, and supports external triggers for
> conversions.
> Each channel can be used independently, with separate trigger, then
> separate IIO devices are used to handle this. Core driver is intended
> to share common resources such as clock, reset, reference voltage and
> registers.

comments below
 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
> ---
>  drivers/iio/dac/Kconfig          |  15 ++
>  drivers/iio/dac/Makefile         |   2 +
>  drivers/iio/dac/stm32-dac-core.c | 180 ++++++++++++++++++++++++
>  drivers/iio/dac/stm32-dac-core.h |  51 +++++++
>  drivers/iio/dac/stm32-dac.c      | 296 +++++++++++++++++++++++++++++++++++++++
>  5 files changed, 544 insertions(+)
>  create mode 100644 drivers/iio/dac/stm32-dac-core.c
>  create mode 100644 drivers/iio/dac/stm32-dac-core.h
>  create mode 100644 drivers/iio/dac/stm32-dac.c
> 
> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
> index d3084028..7198648 100644
> --- a/drivers/iio/dac/Kconfig
> +++ b/drivers/iio/dac/Kconfig
> @@ -274,6 +274,21 @@ config MCP4922
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called mcp4922.
>  
> +config STM32_DAC
> +	tristate "STMicroelectronics STM32 DAC"
> +	depends on (ARCH_STM32 && OF) || COMPILE_TEST
> +	depends on REGULATOR
> +	select STM32_DAC_CORE
> +	help
> +	  Say yes here to build support for STMicroelectronics STM32 Digital
> +	  to Analog Converter (DAC).
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called stm32-dac.
> +
> +config STM32_DAC_CORE
> +	tristate
> +
>  config VF610_DAC
>  	tristate "Vybrid vf610 DAC driver"
>  	depends on OF
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index f01bf4a..afe8ae7 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -29,4 +29,6 @@ obj-$(CONFIG_MAX517) += max517.o
>  obj-$(CONFIG_MAX5821) += max5821.o
>  obj-$(CONFIG_MCP4725) += mcp4725.o
>  obj-$(CONFIG_MCP4922) += mcp4922.o
> +obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o
> +obj-$(CONFIG_STM32_DAC) += stm32-dac.o
>  obj-$(CONFIG_VF610_DAC) += vf610_dac.o
> diff --git a/drivers/iio/dac/stm32-dac-core.c b/drivers/iio/dac/stm32-dac-core.c
> new file mode 100644
> index 0000000..75e4878
> --- /dev/null
> +++ b/drivers/iio/dac/stm32-dac-core.c
> @@ -0,0 +1,180 @@
> +/*
> + * This file is part of STM32 DAC driver
> + *
> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
> + * Author: Fabrice Gasnier <fabrice.gasnier@...com>.
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +
> +#include "stm32-dac-core.h"
> +
> +/**
> + * struct stm32_dac_priv - stm32 DAC core private data
> + * @pclk:		peripheral clock common for all DACs
> + * @rst:		peripheral reset control
> + * @vref:		regulator reference
> + * @common:		Common data for all DAC instances
> + */
> +struct stm32_dac_priv {
> +	struct clk *pclk;
> +	struct reset_control *rst;
> +	struct regulator *vref;
> +	struct stm32_dac_common common;
> +};
> +
> +static struct stm32_dac_priv *to_stm32_dac_priv(struct stm32_dac_common *com)
> +{
> +	return container_of(com, struct stm32_dac_priv, common);
> +}
> +
> +static const struct regmap_config stm32_dac_regmap_cfg = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = sizeof(u32),
> +	.max_register = 0x3fc,
> +};
> +
> +static int stm32_dac_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct stm32_dac_priv *priv;
> +	struct regmap *regmap;
> +	struct resource *res;
> +	void __iomem *mmio;
> +	int ret;
> +
> +	if (!dev->of_node)
> +		return -ENODEV;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	mmio = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(mmio))
> +		return PTR_ERR(mmio);
> +
> +	regmap = devm_regmap_init_mmio(dev, mmio, &stm32_dac_regmap_cfg);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +	priv->common.regmap = regmap;
> +
> +	priv->vref = devm_regulator_get(dev, "vref");
> +	if (IS_ERR(priv->vref)) {
> +		ret = PTR_ERR(priv->vref);
> +		dev_err(dev, "vref get failed, %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = regulator_enable(priv->vref);
> +	if (ret < 0) {
> +		dev_err(dev, "vref enable failed\n");
> +		return ret;
> +	}
> +
> +	ret = regulator_get_voltage(priv->vref);
> +	if (ret < 0) {
> +		dev_err(dev, "vref get voltage failed, %d\n", ret);
> +		goto err_vref;
> +	}
> +	priv->common.vref_mv = ret / 1000;
> +	dev_dbg(dev, "vref+=%dmV\n", priv->common.vref_mv);
> +
> +	priv->pclk = devm_clk_get(dev, "pclk");
> +	if (IS_ERR(priv->pclk)) {
> +		ret = PTR_ERR(priv->pclk);
> +		dev_err(dev, "pclk get failed\n");
> +		goto err_vref;
> +	}
> +
> +	ret = clk_prepare_enable(priv->pclk);
> +	if (ret < 0) {
> +		dev_err(dev, "pclk enable failed\n");
> +		goto err_vref;
> +	}
> +
> +	priv->rst = devm_reset_control_get(dev, NULL);
> +	if (!IS_ERR(priv->rst)) {
> +		reset_control_assert(priv->rst);
> +		udelay(2);
> +		reset_control_deassert(priv->rst);
> +	}
> +
> +	/* When clock speed is higher than 80MHz, set HFSEL */
> +	priv->common.hfsel = (clk_get_rate(priv->pclk) > 80000000UL);
> +	ret = regmap_update_bits(regmap, STM32_DAC_CR, STM32H7_DAC_CR_HFSEL,
> +				 priv->common.hfsel ? STM32H7_DAC_CR_HFSEL : 0);
> +	if (ret)
> +		goto err_pclk;
> +
> +	platform_set_drvdata(pdev, &priv->common);
> +
> +	ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, dev);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to populate DT children\n");
> +		goto err_pclk;
> +	}
> +
> +	return 0;
> +
> +err_pclk:
> +	clk_disable_unprepare(priv->pclk);
> +err_vref:
> +	regulator_disable(priv->vref);
> +
> +	return ret;
> +}
> +
> +static int stm32_dac_remove(struct platform_device *pdev)
> +{
> +	struct stm32_dac_common *common = platform_get_drvdata(pdev);
> +	struct stm32_dac_priv *priv = to_stm32_dac_priv(common);
> +
> +	of_platform_depopulate(&pdev->dev);
> +	clk_disable_unprepare(priv->pclk);
> +	regulator_disable(priv->vref);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id stm32_dac_of_match[] = {
> +	{ .compatible = "st,stm32h7-dac-core", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, stm32_dac_of_match);
> +
> +static struct platform_driver stm32_dac_driver = {
> +	.probe = stm32_dac_probe,
> +	.remove = stm32_dac_remove,
> +	.driver = {
> +		.name = "stm32-dac-core",
> +		.of_match_table = stm32_dac_of_match,
> +	},
> +};
> +module_platform_driver(stm32_dac_driver);
> +
> +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@...com>");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 DAC core driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:stm32-dac-core");
> diff --git a/drivers/iio/dac/stm32-dac-core.h b/drivers/iio/dac/stm32-dac-core.h
> new file mode 100644
> index 0000000..d3099f7
> --- /dev/null
> +++ b/drivers/iio/dac/stm32-dac-core.h
> @@ -0,0 +1,51 @@
> +/*
> + * This file is part of STM32 DAC driver
> + *
> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
> + * Author: Fabrice Gasnier <fabrice.gasnier@...com>.
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __STM32_DAC_CORE_H
> +#define __STM32_DAC_CORE_H
> +
> +#include <linux/regmap.h>
> +
> +/* STM32 DAC registers */
> +#define STM32_DAC_CR		0x00
> +#define STM32_DAC_DHR12R1	0x08
> +#define STM32_DAC_DHR12R2	0x14
> +#define STM32_DAC_DOR1		0x2C
> +#define STM32_DAC_DOR2		0x30
> +
> +/* STM32_DAC_CR bit fields */
> +#define STM32_DAC_CR_EN1		BIT(0)
> +#define STM32H7_DAC_CR_HFSEL		BIT(15)
> +#define STM32_DAC_CR_EN2		BIT(16)
> +
> +/**
> + * struct stm32_dac_common - stm32 DAC driver common data (for all instances)
> + * @regmap: DAC registers shared via regmap
> + * @vref_mv: reference voltage (mv)
> + * @hfsel: high speed bus clock

probably better "high speed bus clock selected"

> + */
> +struct stm32_dac_common {
> +	struct regmap			*regmap;
> +	int				vref_mv;
> +	bool				hfsel;
> +};
> +
> +#endif
> diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c
> new file mode 100644
> index 0000000..ee9711d
> --- /dev/null
> +++ b/drivers/iio/dac/stm32-dac.c
> @@ -0,0 +1,296 @@
> +/*
> + * This file is part of STM32 DAC driver
> + *
> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
> + * Authors: Amelie Delaunay <amelie.delaunay@...com>
> + *	    Fabrice Gasnier <fabrice.gasnier@...com>
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/iio/iio.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "stm32-dac-core.h"
> +
> +#define STM32_DAC_CHANNEL_1		1
> +#define STM32_DAC_CHANNEL_2		2
> +
> +/**
> + * struct stm32_dac - private data of DAC driver
> + * @common:		reference to DAC common data
> + */
> +struct stm32_dac {
> +	struct stm32_dac_common *common;
> +};
> +
> +static int stm32_dac_is_enabled(struct stm32_dac *dac, int channel)
> +{
> +	u32 en, val;
> +	int ret;
> +
> +	ret = regmap_read(dac->common->regmap, STM32_DAC_CR, &val);
> +	if (ret < 0)
> +		return ret;
> +	if (channel == STM32_DAC_CHANNEL_1)
> +		en = FIELD_GET(STM32_DAC_CR_EN1, val);
> +	else
> +		en = FIELD_GET(STM32_DAC_CR_EN2, val);
> +
> +	return !!en;
> +}
> +
> +static int stm32_dac_enable(struct iio_dev *indio_dev, int channel)
> +{
> +	struct stm32_dac *dac = iio_priv(indio_dev);
> +	u32 en = (channel == STM32_DAC_CHANNEL_1) ?
> +		STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2;

could #define a macro to select CR_EN1 or CR_EN2 depending on channel; to 
use here and above and below

or maybe a table to select all the channel-specific constants indexed by 
channel

> +	int ret;
> +
> +	ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, en);
> +	if (ret < 0) {
> +		dev_err(&indio_dev->dev, "Enable failed\n");
> +		return ret;
> +	}
> +
> +	/*
> +	 * When HFSEL is set, it is not allowed to write the DHRx register
> +	 * during 8 clock cycles after the ENx bit is set. It is not allowed
> +	 * to make software/hardware trigger during this period neither.

neither -> either

> +	 */
> +	if (dac->common->hfsel)
> +		udelay(1);
> +
> +	return 0;
> +}
> +
> +static int stm32_dac_disable(struct iio_dev *indio_dev, int channel)
> +{
> +	struct stm32_dac *dac = iio_priv(indio_dev);
> +	u32 en = (channel == STM32_DAC_CHANNEL_1) ?
> +		STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2;
> +	int ret;
> +
> +	ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, 0);
> +	if (ret)
> +		dev_err(&indio_dev->dev, "Disable failed\n");
> +
> +	return ret;
> +}
> +
> +static int stm32_dac_get_value(struct stm32_dac *dac, int channel, int *val)
> +{
> +	int ret;
> +
> +	if (channel == STM32_DAC_CHANNEL_1)
> +		ret = regmap_read(dac->common->regmap, STM32_DAC_DOR1, val);
> +	else
> +		ret = regmap_read(dac->common->regmap, STM32_DAC_DOR2, val);
> +
> +	return ret ? ret : IIO_VAL_INT;
> +}
> +
> +static int stm32_dac_set_value(struct stm32_dac *dac, int channel, int val)
> +{
> +	int ret;
> +
> +	if (channel == STM32_DAC_CHANNEL_1)
> +		ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R1, val);
> +	else
> +		ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R2, val);
> +
> +	return ret;
> +}
> +
> +static int stm32_dac_read_raw(struct iio_dev *indio_dev,
> +			      struct iio_chan_spec const *chan,
> +			      int *val, int *val2, long mask)
> +{
> +	struct stm32_dac *dac = iio_priv(indio_dev);
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		return stm32_dac_get_value(dac, chan->channel, val);
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = dac->common->vref_mv;
> +		*val2 = chan->scan_type.realbits;
> +		return IIO_VAL_FRACTIONAL_LOG2;
> +	case IIO_CHAN_INFO_ENABLE:
> +		ret = stm32_dac_is_enabled(dac, chan->channel);
> +		if (ret < 0)
> +			return ret;
> +		*val = ret;
> +		return IIO_VAL_INT;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int stm32_dac_write_raw(struct iio_dev *indio_dev,
> +			       struct iio_chan_spec const *chan,
> +			       int val, int val2, long mask)
> +{
> +	struct stm32_dac *dac = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		return stm32_dac_set_value(dac, chan->channel, val);
> +	case IIO_CHAN_INFO_ENABLE:
> +		if (!!val)
> +			return stm32_dac_enable(indio_dev, chan->channel);
> +		else
> +			return stm32_dac_disable(indio_dev, chan->channel);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int stm32_dac_debugfs_reg_access(struct iio_dev *indio_dev,
> +					unsigned reg, unsigned writeval,
> +					unsigned *readval)
> +{
> +	struct stm32_dac *dac = iio_priv(indio_dev);
> +
> +	if (!readval)
> +		return regmap_write(dac->common->regmap, reg, writeval);
> +	else
> +		return regmap_read(dac->common->regmap, reg, readval);
> +}
> +
> +static const struct iio_info stm32_dac_iio_info = {
> +	.read_raw = &stm32_dac_read_raw,

no & for functions (matter of taste)

> +	.write_raw = &stm32_dac_write_raw,
> +	.debugfs_reg_access = &stm32_dac_debugfs_reg_access,
> +	.driver_module = THIS_MODULE,
> +};
> +
> +#define STM32_DAC_CHANNEL(chan, name) {		\
> +	.type = IIO_VOLTAGE,			\
> +	.indexed = 1,				\
> +	.output = 1,				\
> +	.channel = chan,			\
> +	.info_mask_separate =			\
> +		BIT(IIO_CHAN_INFO_RAW) |	\
> +		BIT(IIO_CHAN_INFO_ENABLE) |	\
> +		BIT(IIO_CHAN_INFO_SCALE),	\
> +	.scan_type = {				\

scan_type is no needed (yet) and scan_index is missing (or always 0 which 
becomes clear below, a comment may be helpful)

> +		.sign = 'u',			\
> +		.realbits = 12,			\
> +		.storagebits = 16,		\
> +	},					\
> +	.datasheet_name = name,			\
> +}
> +
> +static const struct iio_chan_spec stm32_dac_channels[] = {
> +	STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_1, "out1"),
> +	STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_2, "out2"),
> +};
> +
> +static int stm32_dac_chan_of_init(struct iio_dev *indio_dev)
> +{
> +	struct device_node *np = indio_dev->dev.of_node;
> +	unsigned int i;
> +	u32 channel;
> +	int ret;
> +
> +	ret = of_property_read_u32(np, "st,dac-channel", &channel);
> +	if (ret) {
> +		dev_err(&indio_dev->dev, "Failed to read st,dac-channel\n");
> +		return ret;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(stm32_dac_channels); i++) {
> +		if (stm32_dac_channels[i].channel == channel)
> +			break;
> +	}
> +	if (i >= ARRAY_SIZE(stm32_dac_channels)) {
> +		dev_err(&indio_dev->dev, "Invalid st,dac-channel\n");
> +		return -EINVAL;
> +	}
> +
> +	indio_dev->channels = &stm32_dac_channels[i];
> +	indio_dev->num_channels = 1;

this is unusual, a comment would be helpful
why not expose both channels?

> +
> +	return 0;
> +};
> +
> +static int stm32_dac_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct iio_dev *indio_dev;
> +	struct stm32_dac *dac;
> +	int ret;
> +
> +	if (!np)
> +		return -ENODEV;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*dac));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, indio_dev);
> +
> +	dac = iio_priv(indio_dev);
> +	dac->common = dev_get_drvdata(pdev->dev.parent);
> +	indio_dev->name = dev_name(&pdev->dev);
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->dev.of_node = pdev->dev.of_node;
> +	indio_dev->info = &stm32_dac_iio_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	ret = stm32_dac_chan_of_init(indio_dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = iio_device_register(indio_dev);

just 
return iio_device_register();

candidate for devm_ due to empty _remove()

> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int stm32_dac_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +
> +	iio_device_unregister(indio_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id stm32_dac_of_match[] = {
> +	{ .compatible = "st,stm32-dac", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, stm32_dac_of_match);
> +
> +static struct platform_driver stm32_dac_driver = {
> +	.probe = stm32_dac_probe,
> +	.remove = stm32_dac_remove,
> +	.driver = {
> +		.name = "stm32-dac",
> +		.of_match_table = stm32_dac_of_match,
> +	},
> +};
> +module_platform_driver(stm32_dac_driver);
> +
> +MODULE_ALIAS("platform:stm32-dac");
> +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@...com>");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 DAC driver");
> +MODULE_LICENSE("GPL v2");
> 

-- 

Peter Meerwald-Stadler
Mobile: +43 664 24 44 418

Powered by blists - more mailing lists