lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sun, 2 Apr 2017 16:29:55 +0200
From:   Quentin Schulz <quentin.schulz@...e-electrons.com>
To:     icenowy@...c.io, Lee Jones <lee.jones@...aro.org>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Jonathan Cameron <jic23@...nel.org>,
        Zhang Rui <rui.zhang@...el.com>
Cc:     devicetree@...r.kernel.org, linux-pm@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-iio@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [RFC PATCH v2 3/4] iio: adc: sun4i-gpadc-iio: add support for H3
 thermal sensor

Hi Icenowy,

On 02/04/2017 15:33, Icenowy Zheng wrote:
> This adds support for the Allwinner H3 thermal sensor.
> 
> Allwinner H3 has a thermal sensor like the one in A33, but have its
> registers nearly all re-arranged, sample clock moved to CCU and a pair
> of bus clock and reset added. It's also the base of newer SoCs' thermal
> sensors.
> 
> Some new options is added to gpadc_data struct, to mark the difference
> between the old GPADCs and THS's and the new THS's.
> 
> The thermal sensors on A64 and H5 is like the one on H3, but with of
> course different formula factors.
> 
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> ---
[...]
> +static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
> +{
>  	/* clkin = 6MHz */
>  	regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
>  		     SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
>  		     SUN4I_GPADC_CTRL0_FS_DIV(7) |
>  		     SUN4I_GPADC_CTRL0_T_ACQ(63));
> -	regmap_write(info->regmap, SUN4I_GPADC_CTRL1, info->data->tp_mode_en);
> +	regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
> +		     info->data->tp_mode_en);
>  	regmap_write(info->regmap, SUN4I_GPADC_CTRL3,
>  		     SUN4I_GPADC_CTRL3_FILTER_EN |
>  		     SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
> -	/* period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin; ~0.6s */
> +	/*
> +	 * period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin;
> +	 * ~0.6s
> +	 */

Nothing's changed, I don't remember checkpatch complaining about those
lines. What's wrong with the original ones?

[...]
>  
> +	if (info->data->has_bus_rst) {
> +		info->reset = devm_reset_control_get(&pdev->dev, NULL);
> +		if (IS_ERR(info->reset)) {
> +			ret = PTR_ERR(info->reset);
> +			return ret;
> +		}
> +
> +		ret = reset_control_deassert(info->reset);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	if (info->data->has_bus_clk) {
> +		info->ths_bus_clk = devm_clk_get(&pdev->dev, "bus");
> +		if (IS_ERR(info->ths_bus_clk)) {
> +			ret = PTR_ERR(info->ths_bus_clk);
> +			return ret;
> +		}
> +
> +		ret = clk_prepare_enable(info->ths_bus_clk);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	if (info->data->has_ths_clk) {
> +		info->ths_clk = devm_clk_get(&pdev->dev, "ths");
> +		if (IS_ERR(info->ths_clk)) {
> +			ret = PTR_ERR(info->ths_clk);
> +			return ret;
> +		}
> +
> +		/* Running at 6MHz */
> +		ret = clk_set_rate(info->ths_clk, 6000000);
> +		if (ret)
> +			return ret;
> +
> +		ret = clk_prepare_enable(info->ths_clk);
> +		if (ret)
> +			return ret;
> +	}
> +

I think you're missing the clk_disable_unprepare when one of the clk_foo
func fails.

I've never dealt with reset control but it seems odd to have a
reset_control_deassert in the probe and in the remove functions.

>  	if (!IS_ENABLED(CONFIG_THERMAL_OF))
>  		return 0;
>  
> @@ -691,6 +817,15 @@ static int sun4i_gpadc_remove(struct platform_device *pdev)
>  	if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
>  		iio_map_array_unregister(indio_dev);
>  
> +	if (info->data->has_ths_clk)
> +		clk_disable_unprepare(info->ths_clk);
> +
> +	if (info->data->has_bus_clk)
> +		clk_disable_unprepare(info->ths_bus_clk);
> +
> +	if (info->data->has_bus_rst)
> +		reset_control_deassert(info->reset);
> +
>  	return 0;
>  }
>  
> diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
> index d31d962bb7d8..36046a0d91f3 100644
> --- a/include/linux/mfd/sun4i-gpadc.h
> +++ b/include/linux/mfd/sun4i-gpadc.h
> @@ -39,9 +39,13 @@
>  #define SUN6I_GPADC_CTRL1_ADC_CHAN_MASK			GENMASK(3, 0)
>  
>  /* TP_CTRL1 bits for sun8i A23/A33 SoCs */
> +/* TP_CTRL1 bits for sun8i A23/A33 SoCs */

Spurious change?

Thanks,
Quentin

-- 
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Powered by blists - more mailing lists