| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170403110546.sti3hcvflq4lqeql@dell>
Date: Mon, 3 Apr 2017 12:05:46 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Elaine Zhang <zhangqing@...k-chips.com>
Cc: lgirdwood@...il.com, broonie@...nel.org, huangtao@...k-chips.com,
xxx@...k-chips.com, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org, chenjh@...k-chips.com,
robh+dt@...nel.org, mark.rutland@....com,
devicetree@...r.kernel.org, w.egorov@...tec.de
Subject: Re: [PATCH v5 4/7] mfd: rk808: Add RK805 support
On Mon, 27 Mar 2017, Elaine Zhang wrote:
> The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
> devices. It contains the following components:
>
> - Regulators
> - RTC
> - Clocking
>
> Both RK808 and RK805 chips are using a similar register map,
> so we can reuse the RTC and Clocking functionality.
>
> Signed-off-by: Elaine Zhang <zhangqing@...k-chips.com>
> ---
> drivers/mfd/Kconfig | 4 +-
> drivers/mfd/rk808.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 110 insertions(+), 2 deletions(-)
For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@...aro.org>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 55ecdfb74d31..b410a348b756 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -892,13 +892,13 @@ config MFD_RC5T583
> different functionality of the device.
>
> config MFD_RK808
> - tristate "Rockchip RK808/RK818 Power Management Chip"
> + tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
> depends on I2C && OF
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> help
> - If you say yes here you get support for the RK808 and RK818
> + If you say yes here you get support for the RK805, RK808 and RK818
> Power Management chips.
> This driver provides common support for accessing the device
> through I2C interface. The device supports multiple sub-devices
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> index 3334a2a7f3fb..7276555f0630 100644
> --- a/drivers/mfd/rk808.c
> +++ b/drivers/mfd/rk808.c
> @@ -70,6 +70,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> .volatile_reg = rk808_is_volatile_reg,
> };
>
> +static const struct regmap_config rk805_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = RK805_OFF_SOURCE_REG,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = rk808_is_volatile_reg,
> +};
> +
> static const struct regmap_config rk808_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> @@ -86,6 +94,16 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> }
> };
>
> +static const struct mfd_cell rk805s[] = {
> + { .name = "rk808-clkout", },
> + { .name = "rk808-regulator", },
> + {
> + .name = "rk808-rtc",
> + .num_resources = ARRAY_SIZE(rtc_resources),
> + .resources = &rtc_resources[0],
> + },
> +};
> +
> static const struct mfd_cell rk808s[] = {
> { .name = "rk808-clkout", },
> { .name = "rk808-regulator", },
> @@ -106,6 +124,20 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> },
> };
>
> +static const struct rk808_reg_data rk805_pre_init_reg[] = {
> + {RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
> + RK805_BUCK1_2_ILMAX_4000MA},
> + {RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
> + RK805_BUCK1_2_ILMAX_4000MA},
> + {RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
> + RK805_BUCK3_ILMAX_3000MA},
> + {RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
> + RK805_BUCK4_ILMAX_3500MA},
> + {RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
> + {RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
> + {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
> +};
> +
> static const struct rk808_reg_data rk808_pre_init_reg[] = {
> { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
> { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
> @@ -135,6 +167,41 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> VB_LO_SEL_3500MV },
> };
>
> +static const struct regmap_irq rk805_irqs[] = {
> + [RK805_IRQ_PWRON_RISE] = {
> + .mask = RK805_IRQ_PWRON_RISE_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_VB_LOW] = {
> + .mask = RK805_IRQ_VB_LOW_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_PWRON] = {
> + .mask = RK805_IRQ_PWRON_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_PWRON_LP] = {
> + .mask = RK805_IRQ_PWRON_LP_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_HOTDIE] = {
> + .mask = RK805_IRQ_HOTDIE_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_RTC_ALARM] = {
> + .mask = RK805_IRQ_RTC_ALARM_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_RTC_PERIOD] = {
> + .mask = RK805_IRQ_RTC_PERIOD_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_PWRON_FALL] = {
> + .mask = RK805_IRQ_PWRON_FALL_MSK,
> + .reg_offset = 0,
> + },
> +};
> +
> static const struct regmap_irq rk808_irqs[] = {
> /* INT_STS */
> [RK808_IRQ_VOUT_LO] = {
> @@ -247,6 +314,17 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> },
> };
>
> +static struct regmap_irq_chip rk805_irq_chip = {
> + .name = "rk805",
> + .irqs = rk805_irqs,
> + .num_irqs = ARRAY_SIZE(rk805_irqs),
> + .num_regs = 1,
> + .status_base = RK805_INT_STS_REG,
> + .mask_base = RK805_INT_STS_MSK_REG,
> + .ack_base = RK805_INT_STS_REG,
> + .init_ack_masked = true,
> +};
> +
> static const struct regmap_irq_chip rk808_irq_chip = {
> .name = "rk808",
> .irqs = rk808_irqs,
> @@ -272,6 +350,25 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> };
>
> static struct i2c_client *rk808_i2c_client;
> +
> +static void rk805_device_shutdown(void)
> +{
> + int ret;
> + struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
> +
> + if (!rk808) {
> + dev_warn(&rk808_i2c_client->dev,
> + "have no rk805, so do nothing here\n");
> + return;
> + }
> +
> + ret = regmap_update_bits(rk808->regmap,
> + RK805_DEV_CTRL_REG,
> + DEV_OFF, DEV_OFF);
> + if (ret)
> + dev_err(&rk808_i2c_client->dev, "power off error!\n");
> +}
> +
> static void rk808_device_shutdown(void)
> {
> int ret;
> @@ -309,6 +406,7 @@ static void rk818_device_shutdown(void)
> }
>
> static const struct of_device_id rk808_of_match[] = {
> + { .compatible = "rockchip,rk805" },
> { .compatible = "rockchip,rk808" },
> { .compatible = "rockchip,rk818" },
> { },
> @@ -352,6 +450,15 @@ static int rk808_probe(struct i2c_client *client,
> dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
>
> switch (rk808->variant) {
> + case RK805_ID:
> + rk808->regmap_cfg = &rk805_regmap_config;
> + rk808->regmap_irq_chip = &rk805_irq_chip;
> + pre_init_reg = rk805_pre_init_reg;
> + nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
> + cells = rk805s;
> + nr_cells = ARRAY_SIZE(rk805s);
> + pm_pwroff_fn = rk805_device_shutdown;
> + break;
> case RK808_ID:
> rk808->regmap_cfg = &rk808_regmap_config;
> rk808->regmap_irq_chip = &rk808_irq_chip;
> @@ -444,6 +551,7 @@ static int rk808_remove(struct i2c_client *client)
> }
>
> static const struct i2c_device_id rk808_ids[] = {
> + { "rk805" },
> { "rk808" },
> { "rk818" },
> { },
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists