lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Tue, 04 Apr 2017 16:09:13 +0530
From:   Smitha T Murthy <smitha.t@...sung.com>
To:     Hans Verkuil <hverkuil@...all.nl>
Cc:     linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org,
        linux-kernel@...r.kernel.org, kyungmin.park@...sung.com,
        kamil@...as.org, jtp.park@...sung.com, a.hajda@...sung.com,
        mchehab@...nel.org, pankaj.dubey@...sung.com, krzk@...nel.org,
        m.szyprowski@...sung.com, s.nawrocki@...sung.com
Subject: Re: [Patch v3 11/11] Documention: v4l: Documentation for HEVC CIDs

On Mon, 2017-04-03 at 10:28 +0200, Hans Verkuil wrote:
> On 03/31/2017 11:06 AM, Smitha T Murthy wrote:
> > Added V4l2 controls for HEVC encoder
> > 
> > Signed-off-by: Smitha T Murthy <smitha.t@...sung.com>
> > ---
> >  Documentation/media/uapi/v4l/extended-controls.rst | 355 +++++++++++++++++++++
> >  1 file changed, 355 insertions(+)
> > 
> > diff --git a/Documentation/media/uapi/v4l/extended-controls.rst b/Documentation/media/uapi/v4l/extended-controls.rst
> > index abb1057..c2f3c5e 100644
> > --- a/Documentation/media/uapi/v4l/extended-controls.rst
> > +++ b/Documentation/media/uapi/v4l/extended-controls.rst
> > @@ -1960,6 +1960,361 @@ enum v4l2_vp8_golden_frame_sel -
> >      1, 2 and 3 corresponding to encoder profiles 0, 1, 2 and 3.
> >  
> >  
> > +HEVC Control Reference
> > +---------------------
> > +
> > +The HEVC controls include controls for encoding parameters of HEVC video
> > +codec.
> 
> A general question: are all these controls directly related to the HEVC specification,
> or are there controls that are specific to the exynos HW implementation?
> 
> Any exynos specific controls should be split off from the standard controls.
> 
> Regards,
> 
> 	Hans
> 
Few of these controls are directly related to HEVC specification. But
few are exynos related. I will split exynos related controls in next
patch series.

Regards,
Smitha
> > +
> > +
> > +.. _hevc-control-id:
> > +
> > +HEVC Control IDs
> > +^^^^^^^^^^^^^^^
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP``
> > +    Minimum quantization parameter for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP``
> > +    Maximum quantization parameter for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP``
> > +    Quantization parameter for an I frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_QP``
> > +    Quantization parameter for a P frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_QP``
> > +    Quantization parameter for a B frame for HEVC.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_QP``
> > +    HIERARCHICAL_QP allows host to specify the quantization parameter values
> > +    for each temporal layer through HIERARCHICAL_QP_LAYER. This is valid only
> > +    if HIERARCHICAL_CODING_LAYER is greater than 1.
> > +
> > +.. _v4l2-hevc-hierarchical-coding-type:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_TYPE``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_hier_coding_type -
> > +    Selects the hierarchical coding type for encoding. Possible values are:
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_B``
> > +      - Use the B frame for hierarchical coding.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_P``
> > +      - Use the P frame for hierarchical coding.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER``
> > +    Selects the hierarchical coding layer. In normal encoding
> > +    (non-hierarchial coding), it should be zero. Possible values are 0 ~ 6.
> > +    0 indicates HIERARCHICAL CODING LAYER 0, 1 indicates HIERARCHICAL CODING
> > +    LAYER 1 and so on.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_QP``
> > +    Indicates the hierarchical coding layer quantization parameter.
> > +    For HEVC it can have a value of 0-51. Hence in the control value passed
> > +    the LSB 16 bits will indicate the quantization parameter. The MSB 16 bit
> > +    will pass the layer(0-6) it is meant for.
> > +
> > +.. _v4l2-hevc-profile:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_PROFILE``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_profile -
> > +    Select the desired profile for HEVC encoder.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN``
> > +      - Main profile.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_STILL_PICTURE``
> > +      - Main still picture profile.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +.. _v4l2-hevc-level:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LEVEL``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_level -
> > +    Select the desired level for HEVC encoder.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +       :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1``
> > +      - Level 1.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2``
> > +      - Level 2.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1``
> > +      - Level 2.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3``
> > +      - Level 3.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1``
> > +      - Level 3.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4``
> > +      - Level 4.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1``
> > +      - Level 4.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5``
> > +      - Level 5.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1``
> > +      - Level 5.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2``
> > +      - Level 5.2
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6``
> > +      - Level 6.0
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1``
> > +      - Level 6.1
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2``
> > +      - Level 6.2
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION``
> > +    Indicates the number of evenly spaced subintervals, called ticks, within
> > +    one modulo time. One modulo time represents the fixed interval of one
> > +    second. This is a 16bit unsigned integer and has a maximum value upto
> > +    0xffff.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TIER_FLAG``
> > +    TIER_FLAG specifies tier information of the HEVC encoded picture. Tier were
> > +    made to deal with applications that differ in terms of maximum bit rate.
> > +    Setting the flag to 0 selects HEVC tier_flag as Main tier and setting this
> > +    flag to 1 indicates High tier. High tier is for very demanding applications
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH``
> > +    Selects HEVC maximum coding unit depth.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_REF_NUMBER_FOR_PFRAMES``
> > +    Selects number of P reference picture required for HEVC encoder.
> > +    P-Frame can use 1 or 2 frames for reference.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF``
> > +    Indicates loop filtering. Control ID 0 indicates loop filtering
> > +    is enabled and when set to 1 indicates no filter.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_SLICE_BOUNDARY``
> > +    Selects whether to apply the loop filter across the slice boundary or not.
> > +    If the value is 0, loop filter will not be applied across the slice boundary.
> > +    If the value is 1, loop filter will be applied across the slice boundary.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_BETA_OFFSET_DIV2``
> > +    Selects HEVC loop filter beta offset. The valid range is [-6, +6].
> > +    This could be a negative value in the 2's complement expression.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LF_TC_OFFSET_DIV2``
> > +    Selects HEVC loop filter tc offset. The valid range is [-6, +6].
> > +    This could be a negative value in the 2's complement expression.
> > +
> > +.. _v4l2-hevc-refresh-type:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_TYPE``
> > +    (enum)
> > +
> > +enum v4l2_mpeg_video_hevc_hier_refresh_type -
> > +    Selects refresh type for HEVC encoder.
> > +    Host has to specify the period into
> > +    HEVC_REFRESH_PERIOD.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_NONE``
> > +      - Use the B frame for hierarchical coding.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_CRA``
> > +      - Use CRA(Clean Random Access Unit) picture encoding.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_REFRESH_IDR``
> > +      - Use IDR picture encoding.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_REFRESH_PERIOD``
> > +    Selects the refresh period for HEVC encoder.
> > +    This specifies the number of I picture between two CRA/IDR pictures.
> > +    This is valid only if REFRESH_TYPE is not 0.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_LOSSLESS_CU``
> > +    Indicates HEVC lossless encoding. Setting it to 0 disables lossless
> > +    encoding. Setting it to 1 enables lossless encoding.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_CONST_INTRA_PRED``
> > +    Indicates constant intra prediction for HEVC encoder. Specifies the
> > +    constrained intra prediction in which intra largest coding unit(LCU)
> > +    prediction is performed by using residual data and decoded samples of
> > +    neighboring intra LCU only. Setting it to 1 enables this control ID and
> > +    setting it to 0 disables the control ID.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_WAVEFRONT``
> > +    Indicates wavefront parallel processing for HEVC encoder. Setting it to 0
> > +    disables the control ID and setting it to 1 enables the wavefront parallel
> > +    processing.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_SIGN_DATA_HIDING``
> > +    Setting it to 1 indicates sign data hiding for HEVC encoder. Setting it to
> > +    0 disables the control ID.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_GENERAL_PB``
> > +    Setting the control ID to 1 enables general picture buffers for HEVC
> > +    encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TEMPORAL_ID``
> > +    Indicates temporal identifier specified as temporal_id in
> > +    nal_unit_header_svc_extension() for HEVC encoder which is enabled by
> > +    setting the control ID to 1.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_STRONG_SMOOTHING``
> > +    Indicates bi-linear interpolation is conditionally used in the intra
> > +    prediction filtering process in the CVS when set to 1. Indicates bi-linear
> > +    interpolation is not used in the CVS when set to 0.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_MAX_NUM_MERGE_MV_MINUS1``
> > +    Indicates max number of merge candidate motion vectors.
> > +    Values are from zero to four.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_DARK``
> > +    Indicates HEVC dark region adaptive rate control.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_SMOOTH``
> > +    Indicates HEVC smooth region adaptive rate control.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_STATIC``
> > +    Indicates HEVC static region adaptive rate control.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_ADAPTIVE_RC_ACTIVITY``
> > +    Indicates HEVC activity region adaptive rate control.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_INTRA_PU_SPLIT``
> > +    Indicates intra prediction unit split for HEVC Encoder. Setting it to 1
> > +    disables the feature. Setting it to 1 enables the feature.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_TMV_PREDICTION``
> > +    Indicates temporal motion vector prediction for HEVC encoder. Setting it to
> > +    0 enables the prediction. Setting it to 1 disables the prediction.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_WITHOUT_STARTCODE``
> > +    Specifies if HEVC generates a stream with a size of length field instead of
> > +    start code pattern. The size of the length field is configurable among 1,2
> > +    or 4 thorugh the SIZE_OF_LENGTH_FIELD. It is not applied at SEQ_START.
> > +    Setting it to 0 disables the control ID. Setting it to 1 will enables
> > +    the control ID.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_QP_INDEX_CR``
> > +    Indicates the quantization parameter CR index.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_QP_INDEX_CB``
> > +    Indicates the quantization parameter CB index.
> > +
> > +.. _v4l2-hevc-size-of-length-field:
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD``
> > +(enum)
> > +
> > +enum v4l2_mpeg_video_hevc_size_of_length_field -
> > +    Indicates the size of length field.
> > +    This is valid when encoding WITHOUT_STARTCODE_ENABLE is enabled.
> > +
> > +.. raw:: latex
> > +
> > +    \begin{adjustbox}{width=\columnwidth}
> > +
> > +.. tabularcolumns:: |p{11.0cm}|p{10.0cm}|
> > +
> > +.. flat-table::
> > +       :header-rows:  0
> > +    :stub-columns: 0
> > +
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_0``
> > +      - Generate start code pattern (Normal).
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_1``
> > +      - Generate size of length field instead of start code pattern and length is 1.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_2``
> > +      - Generate size of length field instead of start code pattern and length is 2.
> > +    * - ``V4L2_MPEG_VIDEO_HEVC_SIZE_4``
> > +      - Generate size of length field instead of start code pattern and length is 4.
> > +
> > +.. raw:: latex
> > +
> > +    \end{adjustbox}
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_PREPEND_SPSPPS_TO_IDR``
> > +    Indicates whether to generate SPS and PPS at every IDR. Setting it to 0
> > +    disables it and setting it to one enables the feature.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIERARCHICAL_CODING_LAYER_CH``
> > +    Indicates hierarchical coding layer change for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER0_BITRATE``
> > +    Indicates bit rate for hierarchical coding layer 0 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER1_BITRATE``
> > +    Indicates bit rate for hierarchical coding layer 1 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER2_BITRATE``
> > +    Indicates bit rate for hierarchical coding layer 2 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER3_BITRATE``
> > +    Indicates bit rate for hierarchical coding layer 3 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER4_BITRATE``
> > +    Indicates bit rate for hierarchical coding layer 4 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER5_BITRATE``
> > +    Indicates bit rate for hierarchical coding layer 5 for HEVC encoder.
> > +
> > +``V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER6_BITRATE``
> > +    Indicates bit rate for hierarchical coding layer 6 for HEVC encoder.
> > +
> > +
> >  .. _camera-controls:
> >  
> >  Camera Control Reference
> > 
> 
> 
> 


Powered by blists - more mailing lists