linux-kernel - Re: [PATCH v6 1/4] dt-bindings: phy: Add support for QUSB2 phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1b88275d-4965-4fc3-3bc1-24f086b52bb7@codeaurora.org>
Date:   Wed, 5 Apr 2017 14:39:37 +0530
From:   Vivek Gautam <vivek.gautam@...eaurora.org>
To:     Stephen Boyd <sboyd@...eaurora.org>
Cc:     kishon@...com, robh+dt@...nel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
        mark.rutland@....com, bjorn.andersson@...aro.org,
        srinivas.kandagatla@...aro.org
Subject: Re: [PATCH v6 1/4] dt-bindings: phy: Add support for QUSB2 phy



On 04/04/2017 11:58 PM, Stephen Boyd wrote:
> On 03/20, Vivek Gautam wrote:
>> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>> new file mode 100644
>> index 000000000000..a6d19acde9e0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>> @@ -0,0 +1,45 @@
>> +Qualcomm QUSB2 phy controller
>> +=============================
>> +
>> +QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
>> +
>> +Required properties:
>> + - compatible: compatible list, contains "qcom,msm8996-qusb2-phy".
>> + - reg: offset and length of the PHY register set.
>> + - #phy-cells: must be 0.
>> +
>> + - clocks: a list of phandles and clock-specifier pairs,
>> +	   one for each entry in clock-names.
>> + - clock-names: must be "cfg_ahb" for phy config clock,
>> +			"ref" for 19.2 MHz ref clk,
>> +			"iface" for phy interface clock (Optional).
>> +
>> + - vdd-phy-supply: Phandle to a regulator supply to PHY core block.
>> + - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
>> + - vdda-phy-dpdm-supply: Phandle to 3.1V regulator supply to Dp/Dm port signals.
>> +
>> + - resets: Phandle to reset to phy block.
>> +
>> +Optional properties:
>> + - nvmem-cells: Phandle to nvmem cell that contains 'HS Tx trim'
>> +		tuning parameter value for qusb2 phy.
>> +
>> + - qcom,tcsr-syscon: Phandle to TCSR syscon register region.
>> +
>> +Example:
>> +	hsusb_phy: phy@...1000 {
>> +		compatible = "qcom,msm8996-qusb2-phy";
>> +		reg = <0x7411000 0x180>;
>> +		#phy-cells = <0>;
>> +
>> +		clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
>> +			<&gcc GCC_RX1_USB2_CLKREF_CLK>,
>> +		clock-names = "cfg_ahb", "ref";
>> +
>> +		vdd-phy-supply = <&pm8994_s2>;
> pm8994_s2 is a "corner" regulator. I'm not sure how we're going
> to have it listed here as something like a regulator supply in
> the binding. We probably should leave it out for now and let the
> power domain + pm_qos stuff for corners work out. From what I see
> in the downstream driver the code is setting the corner to '4'
> when active, and '1' when inactive.

Sure, let's allow power domain and corner voltage work handle
this. I will drop this regulator entry from bindings, and the driver.


Best regards
Vivek

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project