linux-kernel - Re: [PATCH] drm: bridge: dw-hdmi: fix input format/encoding from plat

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <b82c43f4-988b-4a12-eb25-93bb5a7bbf73@baylibre.com>
Date:   Fri, 7 Apr 2017 11:10:12 +0200
From:   Neil Armstrong <narmstrong@...libre.com>
To:     Archit Taneja <architt@...eaurora.org>,
        dri-devel@...ts.freedesktop.org
Cc:     laurent.pinchart+renesas@...asonboard.com, Jose.Abreu@...opsys.com,
        linux-kernel@...r.kernel.org,
        Dan Carpenter <dan.carpenter@...cle.com>
Subject: Re: [PATCH] drm: bridge: dw-hdmi: fix input format/encoding from
 plat_data

On 04/07/2017 10:37 AM, Neil Armstrong wrote:
> On 04/07/2017 10:32 AM, Archit Taneja wrote:
>>
>>
>> On 04/06/2017 03:04 PM, Neil Armstrong wrote:
>>> The plat_data->input_bus_format and plat_data->input_bus_encoding
>>> are unsigned long and are alsways >=0, but the value 0 was still
>>
>> s/alsways/always
>>
>>> considered as RGB888 like the default behaviour.
>>
>> Is RGB888 default behaviour for plat_data->input_bus_encoding too?
>> You might want to rephrase it as the "default color space", or
>> something along those lines.
>>>
>>> This patch changes the if test to > 0.
>>
>> The change technically makes the if statement check for a
>> non-zero value.
> 
> Thanks, here is the rephrased commit message :
> 
> The plat_data->input_bus_format and plat_data->input_bus_encoding
> are unsigned long and are always >=0, but the value 0 was still
> considered as RGB888 for input_bus_format and default color space
> for input_bus_encoding in the reworked code.
> 
> This patch changes the if statement check for a non-zero value to
> either use the default input bus_format and/or bus_encoding for a zero
> value and the provided bus_format and/or bus_encoding for a
> non zero value.
> 
>>
>> Reviewed-by: Archit Taneja <architt@...eaurora.org>
>>
>> Feel free to push to drm-misc after updating the commit message.
>>
>> Thanks,
>> Archit
>>
>>>
>>> Thanks to Dan Carpenter for his bug report at [1].
>>>
>>> Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip
>>> RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough).
>>>
>>> [1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda
>>>
>>> Cc: Dan Carpenter <dan.carpenter@...cle.com>
>>> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
>>> ---
>>>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++--
>>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>> index 8b60503..100e1ee 100644
>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>>> @@ -1668,14 +1668,14 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>>>      hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
>>>
>>>      /* TOFIX: Get input format from plat data or fallback to RGB888 */
>>> -    if (hdmi->plat_data->input_bus_format >= 0)
>>> +    if (hdmi->plat_data->input_bus_format)
>>>          hdmi->hdmi_data.enc_in_bus_format =
>>>              hdmi->plat_data->input_bus_format;
>>>      else
>>>          hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
>>>
>>>      /* TOFIX: Get input encoding from plat data or fallback to none */
>>> -    if (hdmi->plat_data->input_bus_encoding >= 0)
>>> +    if (hdmi->plat_data->input_bus_encoding)
>>>          hdmi->hdmi_data.enc_in_encoding =
>>>              hdmi->plat_data->input_bus_encoding;
>>>      else
>>>
>>
> 

Applied to drm-misc-next

Thanks,
Neil