[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1491573855-1039-2-git-send-email-Eugeniy.Paltsev@synopsys.com>
Date: Fri, 7 Apr 2017 17:04:14 +0300
From: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
To: dmaengine@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-snps-arc@...ts.infradead.org,
Dan Williams <dan.j.williams@...el.com>,
Vinod Koul <vinod.koul@...el.com>,
Rob Herring <robh+dt@...nel.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Subject: [PATCH v2 1/2] dt-bindings: Document the Synopsys DW AXI DMA bindings
This patch adds documentation of device tree bindings for the Synopsys
DesignWare AXI DMA controller.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Acked-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/dma/snps,axi-dw-dmac.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/snps,axi-dw-dmac.txt
diff --git a/Documentation/devicetree/bindings/dma/snps,axi-dw-dmac.txt b/Documentation/devicetree/bindings/dma/snps,axi-dw-dmac.txt
new file mode 100644
index 0000000..21666fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,axi-dw-dmac.txt
@@ -0,0 +1,34 @@
+* Synopsys DesignWare AXI DMA Controller
+
+Required properties:
+- compatible: "snps,axi-dma-1.01a"
+- reg: Address range of the DMAC registers. This should include
+ all of the per-channel registers.
+- interrupt: Should contain the DMAC interrupt number.
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device.
+- dma-channels: Number of channels supported by hardware.
+- snps,dma-masters: Number of AXI masters supported by the hardware.
+- snps,data-width: Maximum AXI data width supported by hardware.
+ (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+- snps,priority: Priority of channel. Array size is equal to the number of
+ dma-channels. Priority value must be programmed within [0:dma-channels-1]
+ range. (0 - minimum priority)
+- snps,block-size: Maximum block size supported by the controller channel.
+ Array size is equal to the number of dma-channels.
+
+Example:
+
+dmac: dma-controller@...00 {
+ compatible = "snps,axi-dma-1.01a";
+ reg = <0x80000 0x400>;
+ clocks = <&core_clk>;
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+
+ dma-channels = <4>;
+ snps,dma-masters = <2>;
+ snps,data-width = <3>;
+ snps,block-size = <4096 4096 4096 4096>;
+ snps,priority = <0 1 2 3>;
+};
--
2.5.5
Powered by blists - more mailing lists