lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <696b29b8-da60-1ac1-047e-204c6ce1efa7@kernel.org>
Date:   Sat, 8 Apr 2017 18:26:20 +0100
From:   Jonathan Cameron <jic23@...nel.org>
To:     Quentin Schulz <quentin.schulz@...e-electrons.com>,
        dmitry.torokhov@...il.com, robh+dt@...nel.org,
        mark.rutland@....com, maxime.ripard@...e-electrons.com,
        wens@...e.org, lee.jones@...aro.org, linux@...linux.org.uk,
        knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net
Cc:     thomas.petazzoni@...e-electrons.com, linux-input@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org,
        linux-sunxi@...glegroups.com, icenowy@...c.xyz
Subject: Re: [PATCH v4 3/8] iio: adc: sun4i-gpadc-iio: move code used in MFD
 probing to new function

On 05/04/17 10:06, Quentin Schulz wrote:
> This moves code used in MFD probing to a new sun4i_gpadc_probe_mfd
> function.
> 
> This driver was initially written for A10, A13 and A31 SoCs which
> already had a DT binding for this IP, thus we needed to use an MFD to
> probe the different drivers without changing the DT binding of these
> SoCs.
> 
> For SoCs that will require to create a DT binding for this IP, we can
> avoid using an MFD, thus we need two separate functions: one for probing
> via MFD and one for probing without MFD.
> 
> This split the code specific to MFD probing in a function separated from
> the driver probe function.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
> Acked-by: Jonathan Cameron <jic23@...nel.org>
Clearly the series is getting split up and going via different trees
which is fine. I'll drop my Ack and apply it to the togreg branch of iio.git
with a signed-off.

Thanks,

Jonathan
> ---
> 
> v3:
>   - updated commit log,
> 
> added in v2
> 
>  drivers/iio/adc/sun4i-gpadc-iio.c | 78 ++++++++++++++++++++++-----------------
>  1 file changed, 45 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index a8e134f..7cb997a 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -454,31 +454,16 @@ static int sun4i_irq_init(struct platform_device *pdev, const char *name,
>  	return 0;
>  }
>  
> -static int sun4i_gpadc_probe(struct platform_device *pdev)
> +static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
> +				 struct iio_dev *indio_dev)
>  {
> -	struct sun4i_gpadc_iio *info;
> -	struct iio_dev *indio_dev;
> +	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
> +	struct sun4i_gpadc_dev *sun4i_gpadc_dev =
> +		dev_get_drvdata(pdev->dev.parent);
>  	int ret;
> -	struct sun4i_gpadc_dev *sun4i_gpadc_dev;
> -
> -	sun4i_gpadc_dev = dev_get_drvdata(pdev->dev.parent);
> -
> -	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> -	if (!indio_dev)
> -		return -ENOMEM;
>  
> -	info = iio_priv(indio_dev);
> -	platform_set_drvdata(pdev, indio_dev);
> -
> -	mutex_init(&info->mutex);
>  	info->regmap = sun4i_gpadc_dev->regmap;
> -	info->indio_dev = indio_dev;
> -	init_completion(&info->completion);
> -	indio_dev->name = dev_name(&pdev->dev);
> -	indio_dev->dev.parent = &pdev->dev;
> -	indio_dev->dev.of_node = pdev->dev.of_node;
> -	indio_dev->info = &sun4i_gpadc_iio_info;
> -	indio_dev->modes = INDIO_DIRECT_MODE;
> +
>  	indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
>  	indio_dev->channels = sun4i_gpadc_channels;
>  
> @@ -519,8 +504,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  			dev_err(&pdev->dev,
>  				"could not register thermal sensor: %ld\n",
>  				PTR_ERR(tzd));
> -			ret = PTR_ERR(tzd);
> -			goto err;
> +			return PTR_ERR(tzd);
>  		}
>  	} else {
>  		indio_dev->num_channels =
> @@ -528,36 +512,65 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  		indio_dev->channels = sun4i_gpadc_channels_no_temp;
>  	}
>  
> -	pm_runtime_set_autosuspend_delay(&pdev->dev,
> -					 SUN4I_GPADC_AUTOSUSPEND_DELAY);
> -	pm_runtime_use_autosuspend(&pdev->dev);
> -	pm_runtime_set_suspended(&pdev->dev);
> -	pm_runtime_enable(&pdev->dev);
> -
>  	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
>  		ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
>  				     sun4i_gpadc_temp_data_irq_handler,
>  				     "temp_data", &info->temp_data_irq,
>  				     &info->ignore_temp_data_irq);
>  		if (ret < 0)
> -			goto err;
> +			return ret;
>  	}
>  
>  	ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
>  			     sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
>  			     &info->fifo_data_irq, &info->ignore_fifo_data_irq);
>  	if (ret < 0)
> -		goto err;
> +		return ret;
>  
>  	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
>  		ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
>  		if (ret < 0) {
>  			dev_err(&pdev->dev,
>  				"failed to register iio map array\n");
> -			goto err;
> +			return ret;
>  		}
>  	}
>  
> +	return 0;
> +}
> +
> +static int sun4i_gpadc_probe(struct platform_device *pdev)
> +{
> +	struct sun4i_gpadc_iio *info;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	info = iio_priv(indio_dev);
> +	platform_set_drvdata(pdev, indio_dev);
> +
> +	mutex_init(&info->mutex);
> +	info->indio_dev = indio_dev;
> +	init_completion(&info->completion);
> +	indio_dev->name = dev_name(&pdev->dev);
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->dev.of_node = pdev->dev.of_node;
> +	indio_dev->info = &sun4i_gpadc_iio_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	pm_runtime_set_autosuspend_delay(&pdev->dev,
> +					 SUN4I_GPADC_AUTOSUSPEND_DELAY);
> +	pm_runtime_use_autosuspend(&pdev->dev);
> +	pm_runtime_set_suspended(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +
>  	ret = devm_iio_device_register(&pdev->dev, indio_dev);
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "could not register the device\n");
> @@ -570,7 +583,6 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
>  	if (IS_ENABLED(CONFIG_THERMAL_OF))
>  		iio_map_array_unregister(indio_dev);
>  
> -err:
>  	pm_runtime_put(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
>  
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ