| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <438414b9-33fe-3cb0-9f44-e1e6cf94ea81@rock-chips.com>
Date: Mon, 10 Apr 2017 11:43:27 +0800
From: Kever Yang <kever.yang@...k-chips.com>
To: Heiko Stuebner <heiko@...ech.de>, Will Deacon <will.deacon@....com>
Cc: linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
Jianqun Xu <jay.xu@...k-chips.com>,
Liang Chen <cl@...k-chips.com>,
Brian Norris <briannorris@...omium.org>,
linux-kernel@...r.kernel.org, Andy Yan <andy.yan@...k-chips.com>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Matthias Brugger <matthias.bgg@...il.com>
Subject: Re: [PATCH v2 1/2] arm64: dts: rk3399: add support for firefly-rk3399
board
Hi Heiko,
On 04/08/2017 07:01 AM, Heiko Stuebner wrote:
> Hi Kever,
>
> Am Mittwoch, 5. April 2017, 17:33:19 CEST schrieb Kever Yang:
>> Firefly-rk3399 is a bord from T-Firefly, you can find detail about
>> it here:
>> http://en.t-firefly.com/en/firenow/Firefly_RK3399/
>>
>> This patch add basic node for the board and make it able to bring
>> up.
>>
>> Peripheral works:
>> - usb hub which connect to ehci controller;
>> - UART2 debug
>> - eMMC
>> - PCIe
>>
>> Not work:
>> - USB 3.0 HOST, type-C port
>> - sdio, sd-card
>>
>> Not test for other peripheral:
>> - HDMI
>> - Ethernet
>> - OPTICAL
>> - WiFi/BT
>> - MIPI CSI/DSI
>> - IR
>> - EDP/DP
>>
>> Signed-off-by: Kever Yang <kever.yang@...k-chips.com>
> [...]
>
>> + vdd_log: vdd-log {
>> + compatible = "pwm-regulator";
>> + pwms = <&pwm2 0 25000 1>;
>> + regulator-name = "vdd_log";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> +
>> + /* for rockchip boot on */
>> + rockchip,pwm_id= <2>;
>> + rockchip,pwm_voltage = <1000000>;
> Vendor-kernel stuff, needs to be dropped
Will drop it next version.
>
> [...]
>
>> +&i2c0 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <168>;
>> + i2c-scl-falling-time-ns = <4>;
>> + clock-frequency = <400000>;
>> +
>> + vdd_cpu_b: pmic@40 {
>> + compatible = "silergy,syr827";
>> + reg = <0x40>;
>> + vin-supply = <&vcc5v0_sys>;
>> + regulator-compatible = "fan53555-reg";
>> + regulator-name = "vdd_cpu_b";
>> + regulator-min-microvolt = <712500>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-ramp-delay = <1000>;
>> + vsel-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> non-mainline property
Will drop it next version.
>
>> + fcs,suspend-voltage-selector = <0>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-initial-state = <3>;
> non-mainline property
Will drop it next version.
>
>> + regulator-state-mem {
> indentation is wrong
>
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_gpu: syr828@41 {
>> + compatible = "silergy,syr828";
>> + reg = <0x41>;
>> + vin-supply = <&vcc5v0_sys>;
>> + regulator-compatible = "fan53555-reg";
>> + regulator-name = "vdd_gpu";
>> + regulator-min-microvolt = <712500>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-ramp-delay = <1000>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-initial-state = <3>;
> non-mainline property
Will drop it next version.
>
>> + regulator-state-mem {
> indentation is wrong
>
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + rk808: pmic@1b {
>> + compatible = "rockchip,rk808";
>> + reg = <0x1b>;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pmic_int_l>;
>> + rockchip,system-power-controller;
> system-power-controller without the "rockchip,"?
The driver at drivers/mfd/rk808.c is using "rockchip,
system-power-controller".
>
>> + wakeup-source;
>> + #clock-cells = <1>;
>> + clock-output-names = "xin32k", "rk808-clkout2";
> [...]
>
>> +&i2c1 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <300>;
>> + i2c-scl-falling-time-ns = <15>;
>> +
>> + gsl3673: gsl3673@40 {
> gsl3673: touchscreen@40
>
>> + compatible = "GSL,GSL3673";
> compatible lowercase?
This is not using upstream driver, need porting, remove it now.
>
>> + reg = <0x40>;
>> + screen_max_x = <1536>;
>> + screen_max_y = <2048>;
>> + irq_gpio_number = <&gpio1 RK_PC4 IRQ_TYPE_LEVEL_LOW>;
>> + rst_gpio_number = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
>> + };
>> +
>> + rt5640: rt5640@1c {
>> + #sound-dai-cells = <0>;
>> + compatible = "realtek,rt5640";
>> + reg = <0x1c>;
>> + clocks = <&cru SCLK_I2S_8CH_OUT>;
>> + clock-names = "mclk";
>> + realtek,in1-differential;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&rt5640_hpcon>;
>> + hp-con-gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
>> + io-channels = <&saradc 4>;
>> + hp-det-adc-value = <500>;
> these last 3 properties are not contained in the rt5640 binding
> document on linux-next-20170407 .
Will drop these properties nex version.
>
>> + };
>> +};
>> +
>> +&i2c3 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <450>;
>> + i2c-scl-falling-time-ns = <15>;
>> +};
>> +
>> +&i2c4 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <600>;
>> + i2c-scl-falling-time-ns = <20>;
>> +
>> + fusb0: fusb30x@22 {
> fusb0: usb-typec@22 or so
>
> Also that device is not in mainline yet, so has no approved binding
> so should not be included right now.
Yes, fusb302 driver is not upstreamed, will remove it next version.
Thanks,
- Kever
>
>> + compatible = "fairchild,fusb302";
>> + reg = <0x22>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&fusb0_int>;
>> + int-n-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
>> + vbus-5v-gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
>> + status = "okay";
>> + };
>> +
>> + mpu6500@68 {
> accelerometer@68
>
>> + status = "okay";
>> + compatible = "invensense,mpu6500";
>> + reg = <0x68>;
>> + irq-gpio = <&gpio1 RK_PC6 IRQ_TYPE_EDGE_RISING>;
>> + mpu-int_config = <0x10>;
>> + mpu-level_shifter = <0>;
>> + mpu-orientation = <0 1 0 1 0 0 0 0 1>;
>> + orientation-x= <1>;
>> + orientation-y= <0>;
>> + orientation-z= <0>;
>> + mpu-debug = <1>;
>> + };
>> +};
>> +
> [...]
>
>> +&u2phy0 {
>> + status = "okay";
>> + extcon = <&fusb0>;
> see comment for fusb302
>
>> +
>> + u2phy0_otg: otg-port {
>> + status = "okay";
>> + };
>> +
>> + u2phy0_host: host-port {
>> + phy-supply = <&vcc5v0_host>;
>> + status = "okay";
>> + };
>> +};
>> +
>
> Heiko
>
>
Powered by blists - more mailing lists