[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170410035904.29443-1-joel@jms.id.au>
Date: Mon, 10 Apr 2017 13:29:02 +0930
From: Joel Stanley <joel@....id.au>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, openbmc@...ts.ozlabs.org,
Andy Shevchenko <andy.shevchenko@...il.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Jeremy Kerr <jk@...abs.org>
Subject: [PATCH v3 0/2] drivers: serial: Aspeed VUART driver
This is v3 of a driver for the Aspeed VUART. This version addresses feedback
from Andy and Greg, and includes Rob's ack for the bindings change.
The VUART is a serial device on the BMC side of the LPC bus that connects a BMC
to it's host processor.
We add a flag to the serial core to allow the driver to skip probing of the
THRE irq behaviour, which could hang due to the host not reading bytes out of
the buffer.
We've been using this on systems for over a year, so it has seen a good amount
of testing.
Cheers,
Joel
Jeremy Kerr (1):
drivers/serial: Add driver for Aspeed virtual UART
Joel Stanley (1):
serial: 8250: Add flag so drivers can avoid THRE probe
Documentation/ABI/stable/sysfs-driver-aspeed-vuart | 15 +
Documentation/devicetree/bindings/serial/8250.txt | 2 +
drivers/tty/serial/8250/8250_aspeed_vuart.c | 323 +++++++++++++++++++++
drivers/tty/serial/8250/8250_port.c | 2 +-
drivers/tty/serial/8250/Kconfig | 10 +
drivers/tty/serial/8250/Makefile | 1 +
include/linux/serial_core.h | 1 +
7 files changed, 353 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/stable/sysfs-driver-aspeed-vuart
create mode 100644 drivers/tty/serial/8250/8250_aspeed_vuart.c
--
2.11.0
Powered by blists - more mailing lists