| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170410041958.21269-1-tony@atomide.com>
Date: Sun, 9 Apr 2017 21:19:58 -0700
From: Tony Lindgren <tony@...mide.com>
To: Kishon Vijay Abraham I <kishon@...com>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
Marcel Partap <mpartap@....net>,
Michael Scott <michael.scott@...aro.org>
Subject: [PATCHv3] phy: cpcap-usb: Add CPCAP PMIC USB support
Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a
multiplexing USB PHY.
This USB PHY can operate at least in four modes using pin multiplexing
and two control GPIOS:
- Pass through companion PHY for the SoC USB PHY
- ULPI PHY for the SoC
- Pass through USB for the modem
- UART debug console for the SoC
This patch adds support for droid 4 USB PHY and debug UART modes,
support for other modes can be added later on as needed.
Both peripheral and host mode are working for the USB. The
host mode depends on the cpcap-charger driver for VBUS.
VBUS and ID pin detection are done using cpcap-adc IIO ADC
driver.
Cc: devicetree@...r.kernel.org
Cc: Marcel Partap <mpartap@....net>
Cc: Michael Scott <michael.scott@...aro.org>
Acked-by: Rob Herring <robh@...nel.org>
Tested-by: Sebastian Reichel <sre@...nel.org>
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
Changes since v2:
- Added extcon support as requested by Kishon
- Added Rob's ack
- Folded in Kconfig randconfig build fix to add depends on IIO
Changes since v1:
- Use iio_read_channel_processed() instead of iio_read_channel_scaled()
as changed in the v2 of the ADC driver
- Kept Tested-by from Sebastian Reichel <sre@...nel.org> as the change
from v1 is trivial
---
.../devicetree/bindings/phy/phy-cpcap-usb.txt | 40 ++
drivers/phy/Kconfig | 8 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-cpcap-usb.c | 734 +++++++++++++++++++++
4 files changed, 783 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
create mode 100644 drivers/phy/phy-cpcap-usb.c
diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
new file mode 100644
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
@@ -0,0 +1,40 @@
+Motorola CPCAP PMIC USB PHY binding
+
+Required properties:
+compatible: Shall be either "motorola,cpcap-usb-phy" or
+ "motorola,mapphone-cpcap-usb-phy"
+#phy-cells: Shall be 0
+interrupts: CPCAP PMIC interrupts used by the USB PHY
+interrupt-names: Interrupt names
+io-channels: IIO ADC channels used by the USB PHY
+io-channel-names: IIO ADC channel names
+vusb-supply: Regulator for the PHY
+
+Optional properties:
+pinctrl: Optional alternate pin modes for the PHY
+pinctrl-names: Names for optional pin modes
+mode-gpios: Optional GPIOs for configuring alternate modes
+
+Example:
+cpcap_usb2_phy: phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+ pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ #phy-cells = <0>;
+ interrupts-extended = <
+ &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+ &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+ &cpcap 48 1
+ >;
+ interrupt-names =
+ "id_ground", "id_float", "se0conn", "vbusvld",
+ "sessvld", "sessend", "se1", "dm", "dp";
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+ &gpio1 0 GPIO_ACTIVE_HIGH>;
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+ vusb-supply = <&vusb>;
+};
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -47,6 +47,14 @@ config PHY_BERLIN_SATA
help
Enable this to support the SATA PHY on Marvell Berlin SoCs.
+config PHY_CPCAP_USB
+ tristate "CPCAP USB PHY driver"
+ depends on USB_SUPPORT && IIO
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this for CPCAP USB to work.
+
config ARMADA375_USBCLUSTER_PHY
def_bool y
depends on MACH_ARMADA_375 || COMPILE_TEST
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+obj-$(CONFIG_PHY_CPCAP_USB) += phy-cpcap-usb.o
obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
diff --git a/drivers/phy/phy-cpcap-usb.c b/drivers/phy/phy-cpcap-usb.c
new file mode 100644
--- /dev/null
+++ b/drivers/phy/phy-cpcap-usb.c
@@ -0,0 +1,734 @@
+/*
+ * Motorola CPCAP PMIC USB PHY driver
+ * Copyright (C) 2017 Tony Lindgren <tony@...mide.com>
+ *
+ * Some parts based on earlier Motorola Linux kernel tree code in
+ * board-mapphone-usb.c and cpcap-usb-det.c:
+ * Copyright (C) 2007 - 2011 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/iio/consumer.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/musb.h>
+
+/* CPCAP_REG_USBC1 register bits */
+#define CPCAP_BIT_IDPULSE BIT(15)
+#define CPCAP_BIT_ID100KPU BIT(14)
+#define CPCAP_BIT_IDPUCNTRL BIT(13)
+#define CPCAP_BIT_IDPU BIT(12)
+#define CPCAP_BIT_IDPD BIT(11)
+#define CPCAP_BIT_VBUSCHRGTMR3 BIT(10)
+#define CPCAP_BIT_VBUSCHRGTMR2 BIT(9)
+#define CPCAP_BIT_VBUSCHRGTMR1 BIT(8)
+#define CPCAP_BIT_VBUSCHRGTMR0 BIT(7)
+#define CPCAP_BIT_VBUSPU BIT(6)
+#define CPCAP_BIT_VBUSPD BIT(5)
+#define CPCAP_BIT_DMPD BIT(4)
+#define CPCAP_BIT_DPPD BIT(3)
+#define CPCAP_BIT_DM1K5PU BIT(2)
+#define CPCAP_BIT_DP1K5PU BIT(1)
+#define CPCAP_BIT_DP150KPU BIT(0)
+
+/* CPCAP_REG_USBC2 register bits */
+#define CPCAP_BIT_ZHSDRV1 BIT(15)
+#define CPCAP_BIT_ZHSDRV0 BIT(14)
+#define CPCAP_BIT_DPLLCLKREQ BIT(13)
+#define CPCAP_BIT_SE0CONN BIT(12)
+#define CPCAP_BIT_UARTTXTRI BIT(11)
+#define CPCAP_BIT_UARTSWAP BIT(10)
+#define CPCAP_BIT_UARTMUX1 BIT(9)
+#define CPCAP_BIT_UARTMUX0 BIT(8)
+#define CPCAP_BIT_ULPISTPLOW BIT(7)
+#define CPCAP_BIT_TXENPOL BIT(6)
+#define CPCAP_BIT_USBXCVREN BIT(5)
+#define CPCAP_BIT_USBCNTRL BIT(4)
+#define CPCAP_BIT_USBSUSPEND BIT(3)
+#define CPCAP_BIT_EMUMODE2 BIT(2)
+#define CPCAP_BIT_EMUMODE1 BIT(1)
+#define CPCAP_BIT_EMUMODE0 BIT(0)
+
+/* CPCAP_REG_USBC3 register bits */
+#define CPCAP_BIT_SPARE_898_15 BIT(15)
+#define CPCAP_BIT_IHSTX03 BIT(14)
+#define CPCAP_BIT_IHSTX02 BIT(13)
+#define CPCAP_BIT_IHSTX01 BIT(12)
+#define CPCAP_BIT_IHSTX0 BIT(11)
+#define CPCAP_BIT_IDPU_SPI BIT(10)
+#define CPCAP_BIT_UNUSED_898_9 BIT(9)
+#define CPCAP_BIT_VBUSSTBY_EN BIT(8)
+#define CPCAP_BIT_VBUSEN_SPI BIT(7)
+#define CPCAP_BIT_VBUSPU_SPI BIT(6)
+#define CPCAP_BIT_VBUSPD_SPI BIT(5)
+#define CPCAP_BIT_DMPD_SPI BIT(4)
+#define CPCAP_BIT_DPPD_SPI BIT(3)
+#define CPCAP_BIT_SUSPEND_SPI BIT(2)
+#define CPCAP_BIT_PU_SPI BIT(1)
+#define CPCAP_BIT_ULPI_SPI_SEL BIT(0)
+
+struct cpcap_usb_ints_state {
+ bool id_ground;
+ bool id_float;
+ bool chrg_det;
+ bool rvrs_chrg;
+ bool vbusov;
+
+ bool chrg_se1b;
+ bool se0conn;
+ bool rvrs_mode;
+ bool chrgcurr1;
+ bool vbusvld;
+ bool sessvld;
+ bool sessend;
+ bool se1;
+
+ bool battdetb;
+ bool dm;
+ bool dp;
+};
+
+enum cpcap_gpio_mode {
+ CPCAP_DM_DP,
+ CPCAP_MDM_RX_TX,
+ CPCAP_UNKNOWN,
+ CPCAP_OTG_DM_DP,
+};
+
+struct cpcap_interrupt_desc {
+ struct list_head node; /* list of interrupts */
+ const char *name;
+ int irq;
+};
+
+struct cpcap_phy_ddata {
+ struct regmap *reg;
+ struct device *dev;
+ struct clk *refclk;
+ struct usb_phy phy;
+ struct list_head irq_list;
+ struct mutex lock; /* for list of interrupts used */
+ struct delayed_work detect_work;
+ struct pinctrl *pins;
+ struct pinctrl_state *pins_ulpi;
+ struct pinctrl_state *pins_utmi;
+ struct pinctrl_state *pins_uart;
+ struct extcon_dev *extcon;
+ struct gpio_desc *gpio[2];
+ struct iio_channel *vbus;
+ struct iio_channel *id;
+ struct regulator *vusb;
+ atomic_t active;
+};
+
+static const unsigned int cpcap_usb_phy_cable[] = {
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
+};
+
+static bool cpcap_usb_vbus_valid(struct cpcap_phy_ddata *ddata)
+{
+ int error, value = 0;
+
+ error = iio_read_channel_processed(ddata->vbus, &value);
+ if (error >= 0)
+ return value > 3900 ? true : false;
+
+ dev_err(ddata->dev, "error reading VBUS: %i\n", error);
+
+ return false;
+}
+
+static int cpcap_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ otg->host = host;
+ if (!host)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int cpcap_usb_phy_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ otg->gadget = gadget;
+ if (!gadget)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .owner = THIS_MODULE,
+};
+
+static int cpcap_phy_get_ints_state(struct cpcap_phy_ddata *ddata,
+ struct cpcap_usb_ints_state *s)
+{
+ int val, error;
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val);
+ if (error)
+ return error;
+
+ s->id_ground = val & BIT(15);
+ s->id_float = val & BIT(14);
+ s->vbusov = val & BIT(11);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val);
+ if (error)
+ return error;
+
+ s->vbusvld = val & BIT(3);
+ s->sessvld = val & BIT(2);
+ s->sessend = val & BIT(1);
+ s->se1 = val & BIT(0);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val);
+ if (error)
+ return error;
+
+ s->dm = val & BIT(1);
+ s->dp = val & BIT(0);
+
+ return 0;
+}
+
+static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata);
+static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata);
+
+static void cpcap_usb_detect(struct work_struct *work)
+{
+ struct cpcap_phy_ddata *ddata;
+ struct cpcap_usb_ints_state s;
+ bool vbus = false;
+ int error;
+
+ ddata = container_of(work, struct cpcap_phy_ddata, detect_work.work);
+
+ error = cpcap_phy_get_ints_state(ddata, &s);
+ if (error)
+ return;
+
+ if (s.id_ground) {
+ dev_dbg(ddata->dev, "id ground, USB host mode\n");
+ error = extcon_set_state_sync(ddata->extcon,
+ EXTCON_USB_HOST,
+ true);
+ if (error)
+ dev_warn(ddata->dev, "could not set extcon state %i\n",
+ error);
+
+ error = cpcap_usb_set_usb_mode(ddata);
+ if (error)
+ goto out_err;
+
+ error = musb_mailbox(MUSB_ID_GROUND);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+ CPCAP_BIT_VBUSSTBY_EN,
+ CPCAP_BIT_VBUSSTBY_EN);
+ if (error)
+ goto out_err;
+
+ return;
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+ CPCAP_BIT_VBUSSTBY_EN, 0);
+ if (error)
+ goto out_err;
+
+ vbus = cpcap_usb_vbus_valid(ddata);
+
+ if (vbus) {
+ /* Are we connected to a docking station with vbus? */
+ if (s.id_ground) {
+ dev_dbg(ddata->dev, "connected to a dock\n");
+
+ /* No VBUS needed with doc */
+ error = extcon_set_state_sync(ddata->extcon,
+ EXTCON_USB_HOST,
+ false);
+ if (error)
+ dev_warn(ddata->dev,
+ "could not set extcon state %i\n",
+ error);
+ error = cpcap_usb_set_usb_mode(ddata);
+ if (error)
+ goto out_err;
+ error = musb_mailbox(MUSB_ID_GROUND);
+ if (error)
+ goto out_err;
+
+ return;
+ }
+
+ /* Otherwise assume we're connected to a USB host */
+ dev_dbg(ddata->dev, "connected to USB host\n");
+ error = extcon_set_state_sync(ddata->extcon,
+ EXTCON_USB_HOST, false);
+ if (error)
+ dev_warn(ddata->dev, "could not set extcon state %i\n",
+ error);
+ error = cpcap_usb_set_usb_mode(ddata);
+ if (error)
+ goto out_err;
+ error = musb_mailbox(MUSB_VBUS_VALID);
+ if (error)
+ goto out_err;
+
+ return;
+ }
+
+ /* Default to debug UART mode */
+ error = extcon_set_state_sync(ddata->extcon,
+ EXTCON_USB_HOST, false);
+ if (error)
+ dev_warn(ddata->dev, "could not set extcon state %i\n",
+ error);
+ error = cpcap_usb_set_uart_mode(ddata);
+ if (error)
+ goto out_err;
+
+ error = musb_mailbox(MUSB_VBUS_OFF);
+ if (error)
+ goto out_err;
+
+ dev_dbg(ddata->dev, "set UART mode\n");
+
+ return;
+
+out_err:
+ dev_err(ddata->dev, "error setting cable state: %i\n", error);
+}
+
+static irqreturn_t cpcap_phy_irq_thread(int irq, void *data)
+{
+ struct cpcap_phy_ddata *ddata = data;
+
+ if (!atomic_read(&ddata->active))
+ return IRQ_NONE;
+
+ schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1));
+
+ return IRQ_HANDLED;
+}
+
+static int cpcap_usb_init_irq(struct platform_device *pdev,
+ struct cpcap_phy_ddata *ddata,
+ const char *name)
+{
+ struct cpcap_interrupt_desc *d;
+ int irq, error;
+
+ irq = platform_get_irq_byname(pdev, name);
+ if (!irq)
+ return -ENODEV;
+
+ error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+ cpcap_phy_irq_thread,
+ IRQF_SHARED,
+ name, ddata);
+ if (error) {
+ dev_err(ddata->dev, "could not get irq %s: %i\n",
+ name, error);
+
+ return error;
+ }
+
+ d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ d->name = name;
+ d->irq = irq;
+ list_add(&d->node, &ddata->irq_list);
+
+ return 0;
+}
+
+static const char * const cpcap_phy_irqs[] = {
+ /* REG_INT_0 */
+ "id_ground", "id_float",
+
+ /* REG_INT1 */
+ "se0conn", "vbusvld", "sessvld", "sessend", "se1",
+
+ /* REG_INT_3 */
+ "dm", "dp",
+};
+
+static int cpcap_usb_init_interrupts(struct platform_device *pdev,
+ struct cpcap_phy_ddata *ddata)
+{
+ int i, error;
+
+ for (i = 0; i < ARRAY_SIZE(cpcap_phy_irqs); i++) {
+ error = cpcap_usb_init_irq(pdev, ddata, cpcap_phy_irqs[i]);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+/*
+ * Optional pins and modes. At least Motorola mapphone devices
+ * are using two GPIOs and dynamic pinctrl to multiplex PHY pins
+ * to UART, ULPI or UTMI mode.
+ */
+
+static int cpcap_usb_gpio_set_mode(struct cpcap_phy_ddata *ddata,
+ enum cpcap_gpio_mode mode)
+{
+ if (!ddata->gpio[0] || !ddata->gpio[1])
+ return 0;
+
+ gpiod_set_value(ddata->gpio[0], mode & 1);
+ gpiod_set_value(ddata->gpio[1], mode >> 1);
+
+ return 0;
+}
+
+static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata)
+{
+ int error;
+
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP);
+ if (error)
+ goto out_err;
+
+ if (ddata->pins_uart) {
+ error = pinctrl_select_state(ddata->pins, ddata->pins_uart);
+ if (error)
+ goto out_err;
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1,
+ CPCAP_BIT_VBUSPD,
+ CPCAP_BIT_VBUSPD);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+ 0xffff, CPCAP_BIT_UARTMUX0 |
+ CPCAP_BIT_EMUMODE0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, 0x7fff,
+ CPCAP_BIT_IDPU_SPI);
+ if (error)
+ goto out_err;
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+ return error;
+}
+
+static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
+{
+ int error;
+
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP);
+ if (error)
+ return error;
+
+ if (ddata->pins_utmi) {
+ error = pinctrl_select_state(ddata->pins, ddata->pins_utmi);
+ if (error) {
+ dev_err(ddata->dev, "could not set usb mode: %i\n",
+ error);
+
+ return error;
+ }
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1,
+ CPCAP_BIT_VBUSPD, 0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+ CPCAP_BIT_USBXCVREN,
+ CPCAP_BIT_USBXCVREN);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+ CPCAP_BIT_PU_SPI |
+ CPCAP_BIT_DMPD_SPI |
+ CPCAP_BIT_DPPD_SPI |
+ CPCAP_BIT_SUSPEND_SPI |
+ CPCAP_BIT_ULPI_SPI_SEL, 0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+ CPCAP_BIT_USBXCVREN,
+ CPCAP_BIT_USBXCVREN);
+ if (error)
+ goto out_err;
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+ return error;
+}
+
+static int cpcap_usb_init_optional_pins(struct cpcap_phy_ddata *ddata)
+{
+ ddata->pins = devm_pinctrl_get(ddata->dev);
+ if (IS_ERR(ddata->pins)) {
+ dev_info(ddata->dev, "default pins not configured: %ld\n",
+ PTR_ERR(ddata->pins));
+ ddata->pins = NULL;
+ }
+
+ ddata->pins_ulpi = pinctrl_lookup_state(ddata->pins, "ulpi");
+ if (IS_ERR(ddata->pins_ulpi)) {
+ dev_info(ddata->dev, "ulpi pins not configured\n");
+ ddata->pins_ulpi = NULL;
+ }
+
+ ddata->pins_utmi = pinctrl_lookup_state(ddata->pins, "utmi");
+ if (IS_ERR(ddata->pins_utmi)) {
+ dev_info(ddata->dev, "utmi pins not configured\n");
+ ddata->pins_utmi = NULL;
+ }
+
+ ddata->pins_uart = pinctrl_lookup_state(ddata->pins, "uart");
+ if (IS_ERR(ddata->pins_uart)) {
+ dev_info(ddata->dev, "uart pins not configured\n");
+ ddata->pins_uart = NULL;
+ }
+
+ if (ddata->pins_uart)
+ return pinctrl_select_state(ddata->pins, ddata->pins_uart);
+
+ return 0;
+}
+
+static void cpcap_usb_init_optional_gpios(struct cpcap_phy_ddata *ddata)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode",
+ i, GPIOD_OUT_HIGH);
+ if (IS_ERR(ddata->gpio[i])) {
+ dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
+ i, PTR_ERR(ddata->gpio[i]));
+ ddata->gpio[i] = NULL;
+ }
+ }
+}
+
+static int cpcap_usb_init_iio(struct cpcap_phy_ddata *ddata)
+{
+ enum iio_chan_type type;
+ int error;
+
+ ddata->vbus = devm_iio_channel_get(ddata->dev, "vbus");
+ if (IS_ERR(ddata->vbus)) {
+ error = PTR_ERR(ddata->vbus);
+ goto out_err;
+ }
+
+ if (!ddata->vbus->indio_dev) {
+ error = -ENXIO;
+ goto out_err;
+ }
+
+ error = iio_get_channel_type(ddata->vbus, &type);
+ if (error < 0)
+ goto out_err;
+
+ if (type != IIO_VOLTAGE) {
+ error = -EINVAL;
+ goto out_err;
+ }
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
+ error);
+
+ return error;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_usb_phy_id_table[] = {
+ {
+ .compatible = "motorola,cpcap-usb-phy",
+ },
+ {
+ .compatible = "motorola,mapphone-cpcap-usb-phy",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cpcap_usb_phy_id_table);
+#endif
+
+static int cpcap_usb_phy_probe(struct platform_device *pdev)
+{
+ struct cpcap_phy_ddata *ddata;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct usb_otg *otg;
+ const struct of_device_id *of_id;
+ int error;
+
+ of_id = of_match_device(of_match_ptr(cpcap_usb_phy_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!ddata->reg)
+ return -ENODEV;
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ ddata->dev = &pdev->dev;
+ ddata->phy.dev = ddata->dev;
+ ddata->phy.label = "cpcap_usb_phy";
+ ddata->phy.otg = otg;
+ ddata->phy.type = USB_PHY_TYPE_USB2;
+ INIT_LIST_HEAD(&ddata->irq_list);
+ otg->set_host = cpcap_usb_phy_set_host;
+ otg->set_peripheral = cpcap_usb_phy_set_peripheral;
+ otg->usb_phy = &ddata->phy;
+ mutex_init(&ddata->lock);
+ INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect);
+ platform_set_drvdata(pdev, ddata);
+
+ ddata->vusb = devm_regulator_get(&pdev->dev, "vusb");
+ if (IS_ERR(ddata->vusb))
+ return PTR_ERR(ddata->vusb);
+
+ error = regulator_enable(ddata->vusb);
+ if (error)
+ return error;
+
+ generic_phy = devm_phy_create(ddata->dev, NULL, &ops);
+ if (IS_ERR(generic_phy)) {
+ error = PTR_ERR(generic_phy);
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, ddata);
+
+ phy_provider = devm_of_phy_provider_register(ddata->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ error = cpcap_usb_init_optional_pins(ddata);
+ if (error)
+ return error;
+
+ cpcap_usb_init_optional_gpios(ddata);
+
+ error = cpcap_usb_init_iio(ddata);
+ if (error)
+ return error;
+
+ error = cpcap_usb_init_interrupts(pdev, ddata);
+ if (error)
+ return error;
+
+ ddata->extcon = devm_extcon_dev_allocate(ddata->dev,
+ cpcap_usb_phy_cable);
+ if (IS_ERR(ddata->extcon))
+ return PTR_ERR(ddata->extcon);
+
+ error = devm_extcon_dev_register(ddata->dev,
+ ddata->extcon);
+ if (error)
+ return error;
+
+ usb_add_phy_dev(&ddata->phy);
+ atomic_set(&ddata->active, 1);
+ schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1));
+
+ return 0;
+}
+
+static int cpcap_usb_phy_remove(struct platform_device *pdev)
+{
+ struct cpcap_phy_ddata *ddata = platform_get_drvdata(pdev);
+ int error;
+
+ atomic_set(&ddata->active, 0);
+ error = cpcap_usb_set_uart_mode(ddata);
+ if (error)
+ dev_err(ddata->dev, "could not set UART mode\n");
+
+ error = musb_mailbox(MUSB_VBUS_OFF);
+ if (error)
+ dev_err(ddata->dev, "could not set mailbox\n");
+
+ usb_remove_phy(&ddata->phy);
+ cancel_delayed_work_sync(&ddata->detect_work);
+ clk_unprepare(ddata->refclk);
+ regulator_disable(ddata->vusb);
+
+ return 0;
+}
+
+static struct platform_driver cpcap_usb_phy_driver = {
+ .probe = cpcap_usb_phy_probe,
+ .remove = cpcap_usb_phy_remove,
+ .driver = {
+ .name = "cpcap-usb-phy",
+ .of_match_table = of_match_ptr(cpcap_usb_phy_id_table),
+ },
+};
+
+module_platform_driver(cpcap_usb_phy_driver);
+
+MODULE_ALIAS("platform:cpcap_usb");
+MODULE_AUTHOR("Tony Lindgren <tony@...mide.com>");
+MODULE_DESCRIPTION("CPCAP usb phy driver");
+MODULE_LICENSE("GPL v2");
--
2.12.2
Powered by blists - more mailing lists