[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170410164204.794499783@linuxfoundation.org>
Date: Mon, 10 Apr 2017 18:42:21 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Venkat Gopalakrishnan <venkatg@...eaurora.org>,
Subhash Jadavani <subhashj@...eaurora.org>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Sasha Levin <alexander.levin@...izon.com>
Subject: [PATCH 4.9 089/152] scsi: ufs: add quirk to increase host PA_SaveConfigTime
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Subhash Jadavani <subhashj@...eaurora.org>
[ Upstream commit 56d4a1866d748732fd8d690b2c2156bbc9c9eb02 ]
The maximum value PA_SaveConfigTime is 250 (10us) but this is not enough
for some vendors. Gear switch from PWM to HS may fail even with this
max. PA_SaveConfigTime. Gear switch can be issued by host controller as
an error recovery and any software delay will not help on this case so
we need to increase PA_SaveConfigTime to >32us as per vendor
recommendation. This change adds a quirk to increase the
PA_SaveConfigTime parameter.
Reviewed-by: Venkat Gopalakrishnan <venkatg@...eaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@...eaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/scsi/ufs/ufs-qcom.c | 30 ++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufs-qcom.h | 1 +
drivers/scsi/ufs/ufs_quirks.h | 30 +++++++++---------------------
drivers/scsi/ufs/ufshcd.c | 26 ++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd.h | 9 +++++++++
5 files changed, 75 insertions(+), 21 deletions(-)
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -23,6 +23,7 @@
#include "unipro.h"
#include "ufs-qcom.h"
#include "ufshci.h"
+#include "ufs_quirks.h"
#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
@@ -1031,6 +1032,34 @@ out:
return ret;
}
+static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
+{
+ int err;
+ u32 pa_vs_config_reg1;
+
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ &pa_vs_config_reg1);
+ if (err)
+ goto out;
+
+ /* Allow extension of MSB bits of PA_SaveConfigTime attribute */
+ err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ (pa_vs_config_reg1 | (1 << 12)));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
+{
+ int err = 0;
+
+ if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
+ err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
+
+ return err;
+}
+
static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -1616,6 +1645,7 @@ static struct ufs_hba_variant_ops ufs_hb
.hce_enable_notify = ufs_qcom_hce_enable_notify,
.link_startup_notify = ufs_qcom_link_startup_notify,
.pwr_change_notify = ufs_qcom_pwr_change_notify,
+ .apply_dev_quirks = ufs_qcom_apply_dev_quirks,
.suspend = ufs_qcom_suspend,
.resume = ufs_qcom_resume,
.dbg_register_dump = ufs_qcom_dump_dbg_regs,
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -142,6 +142,7 @@ enum ufs_qcom_phy_init_type {
UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
/* QUniPro Vendor specific attributes */
+#define PA_VS_CONFIG_REG1 0x9000
#define DME_VS_CORE_CLK_CTRL 0xD002
/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8)
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -134,29 +134,17 @@ struct ufs_dev_fix {
*/
#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE (1 << 7)
+/*
+ * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
+ * some vendors.
+ * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
+ * Gear switch can be issued by host controller as an error recovery and any
+ * software delay will not help on this case so we need to increase
+ * PA_SaveConfigTime to >32us as per vendor recommendation.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8)
struct ufs_hba;
void ufs_advertise_fixup_device(struct ufs_hba *hba);
-static struct ufs_dev_fix ufs_fixups[] = {
- /* UFS cards deviations table */
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_NO_FASTAUTO),
- UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
- UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
- UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
- UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
- UFS_DEVICE_QUIRK_PA_TACTIVATE),
- UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
- UFS_DEVICE_QUIRK_PA_TACTIVATE),
- UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
-
- END_FIX
-};
#endif /* UFS_QUIRKS_H_ */
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -188,6 +188,30 @@ ufs_get_pm_lvl_to_link_pwr_state(enum uf
return ufs_pm_lvl_states[lvl].link_state;
}
+static struct ufs_dev_fix ufs_fixups[] = {
+ /* UFS cards deviations table */
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_NO_FASTAUTO),
+ UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
+ UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
+ UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
+ UFS_DEVICE_QUIRK_PA_TACTIVATE),
+ UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
+ UFS_DEVICE_QUIRK_PA_TACTIVATE),
+ UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
+ UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL,
+ UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME),
+
+ END_FIX
+};
+
static void ufshcd_tmc_handler(struct ufs_hba *hba);
static void ufshcd_async_scan(void *data, async_cookie_t cookie);
static int ufshcd_reset_and_restore(struct ufs_hba *hba);
@@ -5062,6 +5086,8 @@ static void ufshcd_tune_unipro_params(st
if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
ufshcd_quirk_tune_host_pa_tactivate(hba);
+
+ ufshcd_vops_apply_dev_quirks(hba);
}
/**
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -261,6 +261,7 @@ struct ufs_pwr_mode_info {
* @pwr_change_notify: called before and after a power mode change
* is carried out to allow vendor spesific capabilities
* to be set.
+ * @apply_dev_quirks: called to apply device specific quirks
* @suspend: called during host controller PM callback
* @resume: called during host controller PM callback
* @dbg_register_dump: used to dump controller debug information
@@ -283,6 +284,7 @@ struct ufs_hba_variant_ops {
enum ufs_notify_change_status status,
struct ufs_pa_layer_attr *,
struct ufs_pa_layer_attr *);
+ int (*apply_dev_quirks)(struct ufs_hba *);
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
void (*dbg_register_dump)(struct ufs_hba *hba);
@@ -805,6 +807,13 @@ static inline int ufshcd_vops_pwr_change
return -ENOTSUPP;
}
+static inline int ufshcd_vops_apply_dev_quirks(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->apply_dev_quirks)
+ return hba->vops->apply_dev_quirks(hba);
+ return 0;
+}
+
static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
{
if (hba->vops && hba->vops->suspend)
Powered by blists - more mailing lists