[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1491988332-13398-1-git-send-email-j-keerthy@ti.com>
Date: Wed, 12 Apr 2017 14:42:12 +0530
From: Keerthy <j-keerthy@...com>
To: <rui.zhang@...el.com>, <edubezval@...il.com>
CC: <j-keerthy@...com>, <linux-pm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
<nm@...com>, <t-kristo@...com>
Subject: [PATCH] thermal: core: Allow orderly_poweroff to be called only once
thermal_zone_device_check --> thermal_zone_device_update -->
handle_thermal_trip --> handle_critical_trips --> orderly_poweroff
The above sequence happens every 250/500 mS based on the configuration.
The orderly_poweroff function is getting called every 250/500 mS.
With a full fledged file system it takes at least 5-10 Seconds to
power off gracefully.
In that period due to the thermal_zone_device_check triggering
periodically the thermal work queues bombard with
orderly_poweroff calls multiple times eventually leading to
failures in gracefully powering off the system.
Make sure that orderly_poweroff is called only once.
Fixes: 0c01ebbfd3caf1d ("Thermal: Remove throttling logic out of thermal_sys.c")
Reported-by: Nishanth Menon <nm@...com>
Signed-off-by: Keerthy <j-keerthy@...com>
---
drivers/thermal/thermal_core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 11f0675..4e68ce0 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -326,6 +326,7 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
int trip, enum thermal_trip_type trip_type)
{
int trip_temp;
+ static bool power_off_triggered;
tz->ops->get_trip_temp(tz, trip, &trip_temp);
@@ -338,11 +339,12 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
if (tz->ops->notify)
tz->ops->notify(tz, trip, trip_type);
- if (trip_type == THERMAL_TRIP_CRITICAL) {
+ if (trip_type == THERMAL_TRIP_CRITICAL && !power_off_triggered) {
dev_emerg(&tz->device,
"critical temperature reached(%d C),shutting down\n",
tz->temperature / 1000);
orderly_poweroff(true);
+ power_off_triggered = true;
}
}
--
1.9.1
Powered by blists - more mailing lists