linux-kernel - Re: [PATCH v6] lightnvm: physical block device (pblk) target

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <0167c816-9955-8fcc-3b53-b8965fef41f1@lightnvm.io>
Date:   Wed, 12 Apr 2017 22:57:30 +0200
From:   Matias Bjørling <mb@...htnvm.io>
To:     Javier González <jg@...htnvm.io>
Cc:     linux-block@...r.kernel.org, linux-kernel@...r.kernel.org,
        Bart.VanAssche@...disk.com,
        Javier González <javier@...xlabs.com>
Subject: Re: [PATCH v6] lightnvm: physical block device (pblk) target

On 04/12/2017 03:19 PM, Javier González wrote:
> This patch introduces pblk, a host-side translation layer for
> Open-Channel SSDs to expose them like block devices. The translation
> layer allows data placement decisions, and I/O scheduling to be
> managed by the host, enabling users to optimize the SSD for their
> specific workloads.
>
> An open-channel SSD has a set of LUNs (parallel units) and a
> collection of blocks. Each block can be read in any order, but
> writes must be sequential. Writes may also fail, and if a block
> requires it, must also be reset before new writes can be
> applied.
>
> To manage the constraints, pblk maintains a logical to
> physical address (L2P) table,  write cache, garbage
> collection logic, recovery scheme, and logic to rate-limit
> user I/Os versus garbage collection I/Os.
>
> The L2P table is fully-associative and manages sectors at a
> 4KB granularity. Pblk stores the L2P table in two places, in
> the out-of-band area of the media and on the last page of a
> line. In the cause of a power failure, pblk will perform a
> scan to recover the L2P table.
>
> The user data is organized into lines. A line is data
> striped across blocks and LUNs. The lines enable the host to
> reduce the amount of metadata to maintain besides the user
> data and makes it easier to implement RAID or erasure coding
> in the future.
>
> pblk implements multi-tenant support and can be instantiated
> multiple times on the same drive. Each instance owns a
> portion of the SSD - both regarding I/O bandwidth and
> capacity - providing I/O isolation for each case.
>
> Finally, pblk also exposes a sysfs interface that allows
> user-space to peek into the internals of pblk. The interface
> is available at /dev/block/*/pblk/ where * is the block
> device name exposed.
>
> This work also contains contributions from:
>   Matias Bjørling <matias@...xlabs.com>
>   Simon A. F. Lund <slund@...xlabs.com>
>   Young Tack Jin <youngtack.jin@...il.com>
>   Huaicheng Li <huaicheng@...uchicago.edu>
>
> Signed-off-by: Javier González <javier@...xlabs.com>
> ---

Thanks Javier. Applied to 4.12, and replaced the v5 version.