[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170413002659.25821-2-sre@kernel.org>
Date: Thu, 13 Apr 2017 02:26:58 +0200
From: Sebastian Reichel <sre@...nel.org>
To: Sebastian Reichel <sre@...nel.org>,
Marcel Holtmann <marcel@...tmann.org>,
Gustavo Padovan <gustavo@...ovan.org>,
Johan Hedberg <johan.hedberg@...il.com>,
Rob Herring <robh+dt@...nel.org>
Cc: Pavel Machek <pavel@....cz>, linux-bluetooth@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCHv4 1/2] dt-bindings: net: bluetooth: Add nokia-bluetooth
Add binding document for serial bluetooth chips using
Nokia H4+ protocol.
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Sebastian Reichel <sre@...nel.org>
---
Changes since PATCHv1:
* change compatible strings
* mention active high/low state for GPIOs
---
.../devicetree/bindings/net/nokia-bluetooth.txt | 51 ++++++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/nokia-bluetooth.txt
diff --git a/Documentation/devicetree/bindings/net/nokia-bluetooth.txt b/Documentation/devicetree/bindings/net/nokia-bluetooth.txt
new file mode 100644
index 000000000000..42be7dc9a70b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nokia-bluetooth.txt
@@ -0,0 +1,51 @@
+Nokia Bluetooth Chips
+---------------------
+
+Nokia phones often come with UART connected bluetooth chips from different
+vendors and modified device API. Those devices speak a protocol named H4+
+(also known as h4p) by Nokia, which is similar to the H4 protocol from the
+Bluetooth standard. In addition to the H4 protocol it specifies two more
+UART status lines for wakeup of UART transceivers to improve power management
+and a few new packet types used to negotiate uart speed.
+
+Required properties:
+
+ - compatible: should contain "nokia,h4p-bluetooth" as well as one of the following:
+ * "brcm,bcm2048-nokia"
+ * "ti,wl1271-bluetooth-nokia"
+ - reset-gpios: GPIO specifier, used to reset the BT module (active low)
+ - bluetooth-wakeup-gpios: GPIO specifier, used to wakeup the BT module (active high)
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor (active high)
+ - clock-names: should be "sysclk"
+ - clocks: should contain a clock specifier for every name in clock-names
+
+Optional properties:
+
+ - None
+
+Example:
+
+/ {
+ /* controlled (enabled/disabled) directly by BT module */
+ bluetooth_clk: vctcxo {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <38400000>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+
+ bluetooth {
+ compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
+
+ reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* gpio26 */
+ host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
+ bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio37 */
+
+ clocks = <&bluetooth_clk>;
+ clock-names = "sysclk";
+ };
+};
--
2.11.0
Powered by blists - more mailing lists