lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 13 Apr 2017 15:01:40 -0500
From:   Rob Herring <robh@...nel.org>
To:     Moritz Fischer <moritz.fischer@...us.com>
Cc:     linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, lee.jones@...aro.org, olof@...om.net,
        linux@...ck-us.net, jdelvare@...e.com, mark.rutland@....com,
        Moritz Fischer <mdf@...nel.org>
Subject: Re: [PATCH 2/3] dt-bindings: hwmon: Add bindings for Google Chromium
 EC HWMON

On Fri, Apr 07, 2017 at 03:00:09PM -0700, Moritz Fischer wrote:
> From: Moritz Fischer <mdf@...nel.org>
> 
> Add bindings for the Chromium EC HWMON. The Chromium EC HWMON
> allows monitoring of temperature sensors and fans attached to the
> EC.
> 
> Signed-off-by: Moritz Fischer <mdf@...nel.org>
> ---
>  .../devicetree/bindings/hwmon/cros-ec-hwmon.txt    | 25 ++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt
> new file mode 100644
> index 0000000..4c94869
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/cros-ec-hwmon.txt
> @@ -0,0 +1,25 @@
> +Chromium Embedded Controller EC temperature and fan control
> +-----------------------------------------------------------
> +
> +Google's Chromium EC HWMON is a hwmon implemented byimplemented by the Chromium EC
> +firmware attached to the Embedded Controller (EC) and controlled via a host-command
> +interface.
> +
> +An EC HWMON node should be only found as a sub-node of the EC node (see
> +Documentation/devicetree/bindings/mfd/cros-ec.txt).
> +
> +Required properties:
> +- compatible: Must contain "google,cros-ec-hwmon"
> +
> +Example:
> +	embedded-controller@1e {
> +		reg = <0x1e>;
> +		compatible = "google,cros-ec-i2c";
> +		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-parent = <&gpio0>;
> +
> +		hwmon {
> +			compatible = "google,cros-ec-hwmon";

This is sufficient for all devices? I don't see that DT provides 
anything here other than instantiating a device, but the parent device 
can just as easily do that.

Rob

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ