lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 13 Apr 2017 14:19:54 -0700
From:   Andrey Smirnov <andrew.smirnov@...il.com>
To:     Tyler Baker <tyler.baker@...aro.org>
Cc:     Shawn Guo <shawnguo@...nel.org>,
        Andrey Yurovsky <yurovsky@...il.com>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH 4/8] ARM: dts: imx7s: Add node for GPC

On Thu, Apr 13, 2017 at 12:03 PM, Tyler Baker <tyler.baker@...aro.org> wrote:
> Hi Andrey,
>
> On 13 April 2017 at 06:32, Andrey Smirnov <andrew.smirnov@...il.com> wrote:
>> Add node for GPC and specify as a parent interrupt controller for SoC bus.
>>
>> Cc: yurovsky@...il.com
>> Cc: Sascha Hauer <kernel@...gutronix.de>
>> Cc: Fabio Estevam <fabio.estevam@....com>
>> Cc: Rob Herring <robh+dt@...nel.org>
>> Cc: Mark Rutland <mark.rutland@....com>
>> Cc: Russell King <linux@...linux.org.uk>
>> Cc: devicetree@...r.kernel.org
>> Cc: linux-kernel@...r.kernel.org
>> Cc: linux-arm-kernel@...ts.infradead.org
>> Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
>> ---
>>  arch/arm/boot/dts/imx7s.dtsi | 27 ++++++++++++++++++++++++++-
>>  1 file changed, 26 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
>> index 8fee299..1a7058f 100644
>> --- a/arch/arm/boot/dts/imx7s.dtsi
>> +++ b/arch/arm/boot/dts/imx7s.dtsi
>> @@ -42,6 +42,7 @@
>>   */
>>[0
>>  #include <dt-bindings/clock/imx7d-clock.h>
>> +#include <dt-bindings/power/imx7-power.h>
>>  #include <dt-bindings/gpio/gpio.h>
>>  #include <dt-bindings/input/input.h>
>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>> @@ -119,7 +120,7 @@
>>                 #address-cells = <1>;
>>                 #size-cells = <1>;
>>                 compatible = "simple-bus";
>> -               interrupt-parent = <&intc>;
>> +               interrupt-parent = <&gpc>;
>
> I've been testing your GPC/PCIe patch sets against v4.11-rc5 on my
> imx7d-cl-som-imx7, but hit a bit of a wall. When gpc is set as the
> interrupt-parent for the soc, the kernel seems to hang and not produce
> any output on the serial port[0]. I tried to enable earlyprintk, but
> no luck getting a trace. Reversing this change, gets the board
> booting[1], but obviously isn't using the gpc which is needed for PCIe
> support as I understand it. I assume you've tested these changes on a
> imx7d-sdb and are not seeing a similar issue? You can find the patches
> I've picked on top of v4.11-rc5 here[2], any idea what might be the
> issue?

Hmm, this is something new and I don't think I've seen it(neither that
nor the backtrace from your following e-mail). Here's the kernel tree
as I've been testing it:

https://github.com/ndreys/linux/commits/imx7d/pcie-support-v8

note, however, that it is based on d0ec4e6 (tip of pci/next when I was
rebasing) of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git,
which is not exactly v4.11-rc5

I'll rebase on top v4.11-r5 and see if I can get the same backtrace
you are getting and see if I can fix it.

Thanks and sorry for breaking things for you,
Andrey Smirnov

Powered by blists - more mailing lists