[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170414154056.32055-5-ralph.sennhauser@gmail.com>
Date: Fri, 14 Apr 2017 17:40:55 +0200
From: Ralph Sennhauser <ralph.sennhauser@...il.com>
To: linux-gpio@...r.kernel.org
Cc: Andrew Lunn <andrew@...n.ch>,
Ralph Sennhauser <ralph.sennhauser@...il.com>,
Thierry Reding <thierry.reding@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Jason Cooper <jason@...edaemon.net>,
Gregory Clement <gregory.clement@...e-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Russell King <linux@...linux.org.uk>,
linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v6 4/4] ARM: dts: armada-xp: Use pwm-fan rather than gpio-fan
From: Andrew Lunn <andrew@...n.ch>
The mvebu GPIO driver can also perform PWM on some pins. Use the pwm-fan
driver to control the fan of the WRT1900AC, giving us finer grained control
over its speed and hence noise.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
URL: https://patchwork.ozlabs.org/patch/427291/
[Ralph Sennhauser: drop flags paramter from pwms, no longer used]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@...il.com>
Tested-by: Andrew Lunn <andrew@...n.ch>
---
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 9efcf59..6d705f5 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -308,13 +308,11 @@
};
};
- gpio_fan {
+ pwm_fan {
/* SUNON HA4010V4-0000-C99 */
- compatible = "gpio-fan";
- gpios = <&gpio0 24 0>;
- gpio-fan,speed-map = <0 0
- 4500 1>;
+ compatible = "pwm-fan";
+ pwms = <&gpio0 24 4000>;
};
dsa {
--
2.10.2
Powered by blists - more mailing lists