linux-kernel - [PATCH 3/3] arm64: dts: exynos: Add support for S6E3HA2 edge panel device on TM2e board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <1492147179-7824-4-git-send-email-hoegeun.kwon@samsung.com>
Date:   Fri, 14 Apr 2017 14:19:39 +0900
From:   Hoegeun Kwon <hoegeun.kwon@...sung.com>
To:     thierry.reding@...il.com, airlied@...ux.ie, robh+dt@...nel.org,
        mark.rutland@....com, catalin.marinas@....com, will.deacon@....com,
        kgene@...nel.org, krzk@...nel.org
Cc:     dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
        javier@....samsung.com, a.hajda@...sung.com,
        andi.shyti@...sung.com, Hoegeun Kwon <hoegeun.kwon@...sung.com>
Subject: [PATCH 3/3] arm64: dts: exynos: Add support for S6E3HA2 edge panel
 device on TM2e board

This patch add the panel device tree node for S6E3HA2 edge display
controller to TM2e dts.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 694717a..79f22f7 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -52,6 +52,18 @@
 	assigned-clock-rates = <278000000>, <400000000>;
 };
 
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3ha2-e";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &ldo31_reg {
 	regulator-name = "TSP_VDD_1.8V_AP";
 	regulator-min-microvolt = <1800000>;
-- 
1.9.1