[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <E5D835FF-589E-4A87-9C08-A47B2CCF5645@gmail.com>
Date: Thu, 20 Apr 2017 00:19:11 +0300
From: Alexander Kochetkov <al.kochet@...il.com>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Philippe Reynes <tremyfr@...il.com>,
Peter Chen <peter.chen@....com>,
Wei Yongjun <weiyongjun1@...wei.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] net: arc_emac: switch to phy_start()/phy_stop()
> 20 апр. 2017 г., в 0:08, Florian Fainelli <f.fainelli@...il.com> написал(а):
>
> This looks fine. If you wanted to go further, you could move the
> phy_connect(), phy_disconnect() calls down to the arc_emac_open()
> respectively arc_emac_stop() as this would also allow the PHY device to
> be fully suspended when the interface is unused.
I’ve checked patch phy_connect() is called from arc_emac_open() and
phy_disconnect() is called from arc_emac_stop().
So, I’ve made mistake in the commit message.
Thank you for review.
>
> 19 апр. 2017 г., в 21:22, Sergei Shtylyov <sergei.shtylyov@...entembedded.com> написал(а):
>
> On 04/19/2017 05:29 PM, Alexander Kochetkov wrote:
>
>> The patch replace phy_start_aneg() with phy_start(). phy_start() call
>
> Replaces.
>
>> phy_start_aneg() as a part of startup sequence and allow recover from
>> error (PHY_HALTED) state.
>>
>> Also added call phy_stop() to arc_emac_remove() to stop PHY state machine
>
> To arc_emac_stop() maybe?
>
Sergei, thanks for spell and gramma checking.
Regards,
Alexander.
Powered by blists - more mailing lists