| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170419050919.6762-2-wens@csie.org>
Date: Wed, 19 Apr 2017 13:09:16 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Chen-Yu Tsai <wens@...e.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [PATCH 1/4] ARM: sunxi: common-regulators: Drop pinmux settings for GPIO pins
As part of our effort to move pinctrl/GPIO interlocking into the
driver where it belongs, this patch drops the definition and usage
of the pinmux settings for the common regulators defined in
sunxi-common-regulators.dtsi.
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts | 4 ---
arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts | 8 ------
arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 4 ---
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 4 ---
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 4 ---
.../boot/dts/sun5i-a13-empire-electronix-d709.dts | 4 ---
arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 5 ----
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 4 ---
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 5 ----
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 8 ------
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 4 ---
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 4 ---
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 30 ----------------------
13 files changed, 88 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 85dcf81ab64e..bc4351bb851f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -120,10 +120,6 @@
status = "okay";
};
-&usb2_vbus_pin_a {
- pins = "PH6";
-};
-
&usb_otg {
dr_mode = "otg";
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
index c6f742a7e69f..d2dee8d434bf 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
@@ -136,14 +136,6 @@
status = "okay";
};
-&usb0_vbus_pin_a {
- pins = "PG13";
-};
-
-&usb1_vbus_pin_a {
- pins = "PB10";
-};
-
&usb_otg {
dr_mode = "host";
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index a27c3fa58736..16f839df4227 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -168,10 +168,6 @@
status = "okay";
};
-&usb1_vbus_pin_a {
- pins = "PG13";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 894f874a5beb..eff36fe1aaa3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -271,10 +271,6 @@
status = "okay";
};
-&usb0_vbus_pin_a {
- pins = "PG11";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
index ea3e5655a61b..5482be174e12 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -216,10 +216,6 @@
status = "okay";
};
-&usb1_vbus_pin_a {
- pins = "PG12";
-};
-
&usbphy {
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
index 34411d27aadf..3dbb0d7c2f8c 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -207,10 +207,6 @@
status = "okay";
};
-&usb0_vbus_pin_a {
- pins = "PG12";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 2489c16f7efa..584fa579ded2 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -186,7 +186,6 @@
};
®_usb0_vbus {
- pinctrl-0 = <&usb0_vbus_pin_a>;
gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
status = "okay";
};
@@ -202,10 +201,6 @@
status = "okay";
};
-&usb0_vbus_pin_a {
- pins = "PG12";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 95f591bb8ced..38072c7e10e2 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -269,10 +269,6 @@
status = "okay";
};
-&usb0_vbus_pin_a {
- pins = "PG12";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index d4f74f476f25..b4c87a23e3f8 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -344,11 +344,6 @@
status = "okay";
};
-&usb1_vbus_pin_a {
- /* different pin from sunxi-common-regulators */
- pins = "PH24";
-};
-
&usbphy {
usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 96bb0bc198ba..004b6ddac813 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -85,10 +85,6 @@
};
};
-&ahci_pwr_pin_a {
- pins = "PB3";
-};
-
&ahci {
target-supply = <®_ahci_5v>;
status = "okay";
@@ -319,10 +315,6 @@
status = "okay";
};
-&usb2_vbus_pin_a {
- pins = "PH12";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 7c96b53b76bf..98177b5891cb 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -106,10 +106,6 @@
status = "okay";
};
-&ahci_pwr_pin_a {
- pins = "PH2";
-};
-
&codec {
status = "okay";
};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 5b6d14555b7c..d7d5330c566f 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -195,10 +195,6 @@
status = "disabled";
};
-&usb1_vbus_pin_a {
- pins = "PG13";
-};
-
&usbphy {
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index ce5c53e4452f..d8e5826fb3de 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -44,33 +44,9 @@
#include <dt-bindings/gpio/gpio.h>
-&pio {
- ahci_pwr_pin_a: ahci_pwr_pin@0 {
- pins = "PB8";
- function = "gpio_out";
- };
-
- usb0_vbus_pin_a: usb0_vbus_pin@0 {
- pins = "PB9";
- function = "gpio_out";
- };
-
- usb1_vbus_pin_a: usb1_vbus_pin@0 {
- pins = "PH6";
- function = "gpio_out";
- };
-
- usb2_vbus_pin_a: usb2_vbus_pin@0 {
- pins = "PH3";
- function = "gpio_out";
- };
-};
-
/ {
reg_ahci_5v: ahci-5v {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&ahci_pwr_pin_a>;
regulator-name = "ahci-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -82,8 +58,6 @@
reg_usb0_vbus: usb0-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_vbus_pin_a>;
regulator-name = "usb0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -94,8 +68,6 @@
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_vbus_pin_a>;
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -107,8 +79,6 @@
reg_usb2_vbus: usb2-vbus {
compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&usb2_vbus_pin_a>;
regulator-name = "usb2-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
--
2.11.0
Powered by blists - more mailing lists