[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4fd957ab-8365-eb4f-b003-467d3747a949@collabora.com>
Date: Thu, 20 Apr 2017 06:58:46 +0100
From: Guillaume Tucker <guillaume.tucker@...labora.com>
To: Heiko Stuebner <heiko@...ech.de>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Neil Armstrong <narmstrong@...libre.com>,
Sjoerd Simons <sjoerd.simons@...labora.com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
John Reitan <john.reitan@....com>,
Wookey <wookey@...kware.org>, devicetree@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/5] dt-bindings: gpu: add bindings for the ARM Mali
Midgard GPU
Hi Heiko,
On 19/04/17 10:02, Heiko Stuebner wrote:
> Am Mittwoch, 19. April 2017, 09:06:17 CEST schrieb Guillaume Tucker:
>> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
>> new file mode 100644
>> index 000000000000..917c4f8d178f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
>> @@ -0,0 +1,57 @@
>> +ARM Mali Midgard GPU
>> +====================
>> +
>> +Required properties:
>> +
>> +- compatible :
>> + * Must be one of the following:
>> + + "arm,mali-t60x"
>> + + "arm,mali-t62x"
>> + + "arm,mali-t720"
>> + + "arm,mali-t760"
>> + + "arm,mali-t820"
>> + + "arm,mali-t830"
>> + + "arm,mali-t860"
>> + + "arm,mali-t880"
>> + * And, optionally, one of the vendor specific compatible:
>> + + "amlogic,meson-gxm-mali"
>
> Please add a "rockchip,rk3288-mali" as well :-) , as I don't trust that the
> generic compatible will be enough for all time and having that already
> defined makes fixing the per soc things later a lot easier.
Sure, will do in patch v4.
>> +
>> +- reg : Physical base address of the device and length of the register area.
>> +
>> +- interrupts : Contains the three IRQ lines required by Mali Midgard devices.
>> +
>> +- interrupt-names : Contains the names of IRQ resources in the order they were
>> + provided in the interrupts property. Must contain: "job", "mmu", "gpu".
>> +
>> +
>> +Optional properties:
>> +
>> +- clocks : Phandle to clock for the Mali Midgard device.
>> +
>> +- mali-supply : Phandle to regulator for the Mali device. Refer to
>> + Documentation/devicetree/bindings/regulator/regulator.txt for details.
>> +
>> +- operating-points : Refer to Documentation/devicetree/bindings/power/opp.txt
>> + for details.
So I can simply change that to operating-points-v2. Both
versions can be used in practice but it sounds like
operating-points can just be ignored in this binding's
documentation. Could you please confirm?
Thanks,
Guillaume
Powered by blists - more mailing lists