Message-Id: <1492700308-10511-1-git-send-email-agust@denx.de>
Date:   Thu, 20 Apr 2017 16:58:28 +0200
From:   Anatolij Gustschin <agust@...x.de>
To:     linux-fpga@...r.kernel.org
Cc:     Alan Tull <atull@...nsource.altera.com>,
        matthew.gerlach@...ux.intel.com, Yi Li <yi1.li@...ux.intel.com>,
        Moritz Fischer <moritz.fischer@...us.com>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3] fpga manager: Add Altera CvP driver

Add FPGA manager driver for loading Arria/Cyclone/Stratix
FPGAs via CvP.

Signed-off-by: Anatolij Gustschin <agust@...x.de>
---
Changes in v3:

  - removed V-series from description (since the driver works
    also with Arria-10). Also renamed functions, config option
    and driver file name. Changed module description in Kconfig

  - dropped 'firmware=' module option (does not allow to bypass
    the fpga framework any more)

  - fixed build warning with newer gcc

  - changed to use hex numbers for PCI bus/device in registered
    fpga manager name. Use more generic fpga manager name (no
    V-series in the name any more)

  - moved steps 16 to 18 from teardown func to write_complete()
    as suggested by Yi

  - rebased on linux-next and tested with Arria-10/Stratix-V
    devices

Changes in v2:

  - rebase for v4.10, change subject ("Stratix V" to "V series")
    and add GPL header

  - use BIT() in register bit macro definitions

  - change .state() to return status or FPGA_MGR_STATE_UNKNOWN

  - use unique name for registered FPGA manager (append "@B:D.F")

  - use PCI_ANY_ID for device ID, users can set custom ID using
    new_id sysfs interface

  - remove map_base/map_len init and use pci_iomap() instead

  - simplify to use pci_read_config_word() instead of
    pci_bus_read_config_word()

  - run fpga_mgr_put() after usage, so the module can be removed
    without unbinding the driver

  - access CVP_STATUS as a 32-bit register, update CVP_STATUS
    bits macros

  - check CONFIG_READY bit in write_init and perform a teardown
    if this bit is set. Move teardown code to separate function
    as suggested

  - change function names to altera_v_*() as we can use
    the driver with other V-series FPGAs. Also change
    the driver file and Kconfig option names accordingly

  - pad written firmware data if the file size is not a multiple of 4

  - when config error checking is enabled, run checks after a 4KiB
    chunk is written

  - remove single built-in firmware string, add module parameter
    to allow setting default firmware for multiple cards as a
    Bus:Device.Function specific strings (optional)

  - remove polling of non-existing data bits DATA_ENC, DATA_COMP.
    Instead, add module parameter for bitstream specific clock to
    data ratio setting

 drivers/fpga/Kconfig      |   7 +
 drivers/fpga/Makefile     |   1 +
 drivers/fpga/altera-cvp.c | 587 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 595 insertions(+)
 create mode 100644 drivers/fpga/altera-cvp.c

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 161ba9d..be48c2e 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -26,6 +26,13 @@ config FPGA_MGR_ICE40_SPI
 	help
 	  FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
 
+config FPGA_MGR_ALTERA_CVP
+	tristate "Altera Arria/Cyclone/Stratix CvP FPGA Manager"
+	depends on PCI
+	help
+	  FPGA manager driver support for Altera FPGAs using the
+	  CvP interface over PCIe.
+
 config FPGA_MGR_SOCFPGA
 	tristate "Altera SOCFPGA FPGA Manager"
 	depends on ARCH_SOCFPGA || COMPILE_TEST
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 2a4f021..2e5c8b6 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_FPGA)			+= fpga-mgr.o
 
 # FPGA Manager Drivers
+obj-$(CONFIG_FPGA_MGR_ALTERA_CVP)	+= altera-cvp.o
 obj-$(CONFIG_FPGA_MGR_ICE40_SPI)	+= ice40-spi.o
 obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
 obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
new file mode 100644
index 0000000..b146033
--- /dev/null
+++ b/drivers/fpga/altera-cvp.c
@@ -0,0 +1,587 @@
+/*
+ * FPGA Manager Driver for Altera Arria/Cyclone/Stratix CvP
+ *
+ * Copyright (C) 2017 DENX Software Engineering
+ *
+ * Anatolij Gustschin <agust@...x.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Manage Altera FPGA firmware using PCIe CvP.
+ * Firmware must be in binary "rbf" format.
+ */
+
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sizes.h>
+
+#define CVP_BAR		0	/* BAR used for data transfer in memory mode */
+#define CVP_DUMMY_WR	244	/* dummy writes to clear CvP state machine */
+#define TIMEOUT_IN_US	2000
+
+/* Vendor Specific Extended Capability Offset */
+#define VSEC_OFFSET			0x200
+#define VSEC_PCIE_EXT_CAP_ID_VAL	0x000b
+
+/* offsets from VSEC_OFFSET */
+#define VSEC_PCIE_EXT_CAP_ID		(VSEC_OFFSET + 0x00)	/* 16bit */
+#define VSEC_VERSION			0x02		/* 8bit */
+#define VSEC_NEXT_CAP_OFF		0x03		/* 8bit */
+#define VSEC_ID				0x04		/* 16bit */
+#define VSEC_REV			0x06		/* 8bit */
+#define VSEC_LENGTH			0x07		/* 8bit */
+#define VSEC_ALTERA_MARKER		0x08		/* 32bit */
+
+#define VSEC_CVP_STATUS			(VSEC_OFFSET + 0x1c)	/* 32bit */
+#define VSEC_CVP_STATUS_DATA_ENC	BIT(16)	/* is treated as encrypted */
+#define VSEC_CVP_STATUS_DATA_COMP	BIT(17)	/* is treated as compressed */
+#define VSEC_CVP_STATUS_CFG_RDY		BIT(18)	/* CVP_CONFIG_READY */
+#define VSEC_CVP_STATUS_CFG_ERR		BIT(19)	/* CVP_CONFIG_ERROR */
+#define VSEC_CVP_STATUS_CVP_EN		BIT(20)	/* ctrl block is enabling CVP */
+#define VSEC_CVP_STATUS_USERMODE	BIT(21)	/* USERMODE */
+#define VSEC_CVP_STATUS_CFG_DONE	BIT(23)	/* CVP_CONFIG_DONE */
+#define VSEC_CVP_STATUS_PLD_CLK_IN_USE	BIT(24)	/* PLD_CLK_IN_USE */
+
+#define VSEC_CVP_MODE_CTRL		(VSEC_OFFSET + 0x20)	/* 32bit */
+#define VSEC_CVP_MODE_CTRL_CVP_MODE	BIT(0) /* CVP (1) or normal mode (0) */
+#define VSEC_CVP_MODE_CTRL_HIP_CLK_SEL	BIT(1) /* PMA (1) or fabric clock (0) */
+#define VSEC_CVP_MODE_CTRL_FULL_CFG	BIT(2) /* CVP_FULLCONFIG */
+#define VSEC_CVP_MODE_CTRL_NUMCLKS	(0xff<<8) /* CVP_NUMCLKS */
+
+#define VSEC_CVP_DATA			(VSEC_OFFSET + 0x28)	/* 32bit */
+#define VSEC_CVP_PROG_CTRL		(VSEC_OFFSET + 0x2c)	/* 32bit */
+#define VSEC_CVP_PROG_CTRL_CONFIG	BIT(0)
+#define VSEC_CVP_PROG_CTRL_START_XFER	BIT(1)
+
+#define VSEC_UNCOR_ERR_STATUS		(VSEC_OFFSET + 0x34)	/* 32bit */
+#define VSEC_UNCOR_ERR_MASK		(VSEC_OFFSET + 0x38)	/* 32bit */
+#define	VSEC_UNCOR_ERR_CVP_CFG_ERR	BIT(5)	/* CVP_CONFIG_ERROR_LATCHED */
+
+#define	DRV_NAME		"altera-cvp"
+#define ALTERA_CVP_MGR_NAME	"Altera CvP FPGA Manager"
+
+static int chkcfg; /* use value 1 for debugging only */
+module_param(chkcfg, int, 0664);
+MODULE_PARM_DESC(chkcfg, "1 - check CvP status, 0 - skip checking (default 0)");
+
+static int numclks = 1; /* default 1 for uncompressed and unencrypted */
+module_param(numclks, int, 0664);
+MODULE_PARM_DESC(numclks, "Clock to data ratio 1, 4 or 8 (default 1)");
+
+struct altera_cvp_conf {
+	struct fpga_manager	*mgr;
+	struct pci_dev		*pci_dev;
+	void __iomem		*map;
+	char			mgr_name[64];
+};
+
+static inline void altera_cvp_chk_numclks(void)
+{
+	switch (numclks) {
+	case 1:
+	case 4:
+	case 8:
+		break;
+	default:
+		numclks = 1;
+		break;
+	}
+}
+
+static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 status;
+
+	pci_read_config_dword(conf->pci_dev, VSEC_CVP_STATUS, &status);
+
+	if (status & VSEC_CVP_STATUS_CFG_DONE)
+		return FPGA_MGR_STATE_OPERATING;
+
+	if (status & VSEC_CVP_STATUS_CVP_EN)
+		return FPGA_MGR_STATE_POWER_UP;
+
+	return FPGA_MGR_STATE_UNKNOWN;
+}
+
+static int altera_cvp_teardown(struct fpga_manager *mgr,
+			       struct fpga_image_info *info)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	int status = 0;
+	int delay_us, i;
+	u32 val32;
+
+	/*
+	 * STEP 12 - reset START_XFER bit
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32);
+	val32 &= ~VSEC_CVP_PROG_CTRL_START_XFER;
+	pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+	/*
+	 * STEP 13 - reset CVP_CONFIG bit
+	 */
+	val32 &= ~VSEC_CVP_PROG_CTRL_CONFIG;
+	pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+	/*
+	 * STEP 14
+	 * - set CVP_NUMCLKS to 0x01 and then issue CVP_DUMMY_WR dummy
+	 *   writes to the HIP
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+	val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+	/* set number of CVP clock cycles for every CVP Data Register Write */
+	val32 |= 0x01 << 8;	/* 1 clock */
+	pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+	/* dummy memory write to switch from CVP clock to internal clock */
+	val32 = 0xdeadbeef;
+	if (conf->map) {
+		u32 *map = conf->map;
+
+		for (i = 0; i < CVP_DUMMY_WR; i++)
+			*map++ = val32; /* use MemoryWrite */
+	} else {
+		for (i = 0; i < CVP_DUMMY_WR; i++)
+			pci_write_config_dword(pdev, VSEC_CVP_DATA, val32);
+	}
+
+	/*
+	 * STEP 15 - poll CVP_CONFIG_READY bit
+	 */
+	delay_us = 0;
+	while (1) {
+		pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+		if ((val32 & VSEC_CVP_STATUS_CFG_RDY) == 0)
+			break;
+
+		udelay(1);	/* wait 1us */
+
+		if (delay_us++ > TIMEOUT_IN_US) {
+			dev_warn(&mgr->dev, "CVP_CONFIG_READY == 0 timeout\n");
+			status = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	return status;
+}
+
+static int altera_cvp_write_init(struct fpga_manager *mgr,
+				 struct fpga_image_info *info,
+				 const char *buf, size_t count)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	int delay_us, i;
+	u32 val32;
+	int ret;
+
+	if (info && info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
+		dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * STEP 1 - read CVP status and check CVP_EN flag
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+	if (!(val32 & VSEC_CVP_STATUS_CVP_EN)) {
+		dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val32);
+		return -ENODEV;
+	}
+
+	if (val32 & VSEC_CVP_STATUS_CFG_RDY) {
+		dev_warn(&mgr->dev, "CvP already started, teardown first\n");
+		ret = altera_cvp_teardown(mgr, info);
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * STEP 2
+	 * - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
+	 */
+	/* switch from fabric to PMA clock */
+	pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+	val32 |= VSEC_CVP_MODE_CTRL_HIP_CLK_SEL;
+	pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+	/* set CVP mode */
+	pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+	val32 |= VSEC_CVP_MODE_CTRL_CVP_MODE;
+	pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+	/*
+	 * STEP 3
+	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+	val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+	val32 |= 0x01 << 8;	/* 1 clock */
+	pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+	/* dummy memory write to switch from internal clock to CVP clock */
+	val32 = 0xdeadbeef;
+	if (conf->map) {
+		u32 *map = conf->map;
+
+		for (i = 0; i < CVP_DUMMY_WR; i++)
+			*map++ = val32; /* use MemoryWrite */
+	} else {
+		for (i = 0; i < CVP_DUMMY_WR; i++)
+			pci_write_config_dword(pdev, VSEC_CVP_DATA, val32);
+	}
+
+	/*
+	 * STEP 4 - set CVP_CONFIG bit
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32);
+	/* request control block to begin transfer using CVP */
+	val32 |= VSEC_CVP_PROG_CTRL_CONFIG;
+	pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+	/*
+	 * STEP 5 - poll CVP_CONFIG READY
+	 */
+	delay_us = 0;
+	while (1) {
+		pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+		if ((val32 & VSEC_CVP_STATUS_CFG_RDY) ==
+		    VSEC_CVP_STATUS_CFG_RDY)
+			break;
+
+		udelay(1); /* wait 1us */
+
+		if (delay_us++ > TIMEOUT_IN_US) {
+			dev_warn(&mgr->dev, "CVP_CONFIG_READY == 1 timeout\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	/*
+	 * STEP 6
+	 * - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+	val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+	val32 |= 0x01 << 8; /* 1 clock */
+	pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+	/* dummy memory write to switch from internal clock to CVP clock */
+	val32 = 0xdeadbeef;
+	if (conf->map) {
+		u32 *map = conf->map;
+
+		for (i = 0; i < CVP_DUMMY_WR; i++)
+			*map++ = val32; /* use MemoryWrite */
+	} else {
+		for (i = 0; i < CVP_DUMMY_WR; i++)
+			pci_write_config_dword(pdev, VSEC_CVP_DATA, val32);
+	}
+
+	/*
+	 * STEP 7 - set START_XFER
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_PROG_CTRL, &val32);
+	val32 |= VSEC_CVP_PROG_CTRL_START_XFER;
+	pci_write_config_dword(pdev, VSEC_CVP_PROG_CTRL, val32);
+
+	/*
+	 * STEP 8 - start transfer (set CVP_NUMCLKS)
+	 */
+	altera_cvp_chk_numclks();
+	pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+	val32 &= ~VSEC_CVP_MODE_CTRL_NUMCLKS;
+	val32 |= numclks << 8; /* bitstream specific clock count */
+	pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+	return 0;
+}
+
+static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	u32 val32;
+
+	/*
+	 * STEP 10 (optional) - check CVP_CONFIG_ERROR flag
+	 */
+	pci_read_config_dword(conf->pci_dev, VSEC_CVP_STATUS, &val32);
+	if (val32 & VSEC_CVP_STATUS_CFG_ERR) {
+		dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zi bytes!\n",
+			bytes);
+		return -EPROTO;
+	}
+	return 0;
+}
+
+static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
+			    size_t count)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	const u32 *data;
+	size_t bytes = 0;
+	int status = 0;
+	u32 mask;
+	u32 *map;
+
+	/*
+	 * STEP 9
+	 * - write 32-bit configuration data from RBF file to CVP data register
+	 */
+	data = (u32 *)buf;
+	map = conf->map;
+	bytes = count;
+
+	if (map) {
+		while (bytes >= 4) {
+			*map = *data++;
+			bytes -= 4;
+
+			/*
+			 * STEP 10 (optional) and STEP 11
+			 * - check error flag
+			 * - loop until data transfer completed
+			 */
+			if (chkcfg && !(bytes % SZ_4K)) {
+				size_t done = count - bytes;
+
+				status = altera_cvp_chk_error(mgr, done);
+				if (status < 0)
+					return status;
+			}
+		}
+	} else {
+		while (bytes >= 4) {
+			pci_write_config_dword(pdev, VSEC_CVP_DATA, *data++);
+			bytes -= 4;
+
+			if (chkcfg && !(bytes % SZ_4K)) {
+				size_t done = count - bytes;
+
+				status = altera_cvp_chk_error(mgr, done);
+				if (status < 0)
+					return status;
+			}
+		}
+	}
+
+	switch (bytes) {
+	case 3:
+		mask = 0x00ffffff;
+		break;
+	case 2:
+		mask = 0x0000ffff;
+		break;
+	case 1:
+		mask = 0x000000ff;
+		break;
+	case 0:
+		mask = 0x00000000;
+		break;
+	}
+
+	if (mask) {
+		u32 tail = *data & mask;
+
+		if (map)
+			*map = tail;
+		else
+			pci_write_config_dword(pdev, VSEC_CVP_DATA, tail);
+
+		if (chkcfg)
+			status = altera_cvp_chk_error(mgr, count);
+	}
+
+	return status;
+}
+
+static int altera_cvp_write_complete(struct fpga_manager *mgr,
+				     struct fpga_image_info *info)
+{
+	struct altera_cvp_conf *conf = mgr->priv;
+	struct pci_dev *pdev = conf->pci_dev;
+	int status;
+	int delay_us;
+	u32 status_msk;
+	u32 val32;
+
+	status = altera_cvp_teardown(mgr, info);
+	if (status < 0)
+		return status;
+
+	/*
+	 * STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit
+	 */
+	pci_read_config_dword(pdev, VSEC_UNCOR_ERR_STATUS, &val32);
+	if (val32 & VSEC_UNCOR_ERR_CVP_CFG_ERR) {
+		dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
+		return -EFAULT;
+	}
+
+	/*
+	 * STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit
+	 */
+	pci_read_config_dword(pdev, VSEC_CVP_MODE_CTRL, &val32);
+	val32 &= ~VSEC_CVP_MODE_CTRL_HIP_CLK_SEL;
+	val32 &= ~VSEC_CVP_MODE_CTRL_CVP_MODE;
+	pci_write_config_dword(pdev, VSEC_CVP_MODE_CTRL, val32);
+
+	/*
+	 * STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits
+	 */
+	delay_us = 0;
+	status_msk = VSEC_CVP_STATUS_PLD_CLK_IN_USE | VSEC_CVP_STATUS_USERMODE;
+	while (1) {
+		pci_read_config_dword(pdev, VSEC_CVP_STATUS, &val32);
+		if ((val32 & status_msk) == status_msk)
+			break;
+
+		udelay(1); /* wait 1us */
+
+		if (delay_us++ > TIMEOUT_IN_US) {
+			dev_warn(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
+			status = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	return status;
+}
+
+static const struct fpga_manager_ops altera_cvp_ops = {
+	.state		= altera_cvp_state,
+	.write_init	= altera_cvp_write_init,
+	.write		= altera_cvp_write,
+	.write_complete	= altera_cvp_write_complete,
+};
+
+static int altera_cvp_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *dev_id)
+{
+	struct altera_cvp_conf *conf;
+	u16 cmd, val16;
+	int ret;
+
+	pci_read_config_word(pdev, VSEC_PCIE_EXT_CAP_ID, &val16);
+	if (val16 != VSEC_PCIE_EXT_CAP_ID_VAL) {
+		dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val16);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* Enable memory BAR access */
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	if (!(cmd & PCI_COMMAND_MEMORY)) {
+		cmd |= PCI_COMMAND_MEMORY;
+		pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	}
+
+	conf = devm_kzalloc(&pdev->dev, sizeof(*conf), GFP_KERNEL);
+	if (!conf) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	conf->pci_dev = pdev;
+
+	if (pci_request_region(pdev, CVP_BAR, "CVP") < 0) {
+		dev_err(&pdev->dev, "Requesting CVP BAR region failed\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	conf->map = pci_iomap(pdev, CVP_BAR, 0);
+	if (!conf->map)
+		dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");
+
+	snprintf(conf->mgr_name, sizeof(conf->mgr_name), "%s @%02x:%02x.%d",
+		 ALTERA_CVP_MGR_NAME, pdev->bus->number,
+		 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+	ret = fpga_mgr_register(&pdev->dev, conf->mgr_name,
+				&altera_cvp_ops, conf);
+	if (ret)
+		goto err_unmap;
+
+	conf->mgr = fpga_mgr_get(&pdev->dev);
+	if (IS_ERR(conf->mgr)) {
+		dev_err(&pdev->dev, "Getting fpga mgr reference failed\n");
+		ret = -ENODEV;
+		goto err_unreg;
+	}
+	fpga_mgr_put(conf->mgr);
+
+	return 0;
+
+err_unreg:
+	fpga_mgr_unregister(&pdev->dev);
+err_unmap:
+	pci_iounmap(pdev, conf->map);
+	pci_release_region(pdev, CVP_BAR);
+err:
+	cmd &= ~PCI_COMMAND_MEMORY;
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	return ret;
+}
+
+static void altera_cvp_remove(struct pci_dev *pdev)
+{
+	struct fpga_manager *mgr = pci_get_drvdata(pdev);
+	struct altera_cvp_conf *conf = mgr->priv;
+	u16 cmd;
+
+	fpga_mgr_unregister(&pdev->dev);
+	pci_iounmap(pdev, conf->map);
+	pci_release_region(pdev, CVP_BAR);
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+	cmd &= ~PCI_COMMAND_MEMORY;
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+}
+
+#define PCI_VENDOR_ID_ALTERA	0x1172
+
+static struct pci_device_id altera_cvp_id_tbl[] = {
+	{ PCI_VDEVICE(ALTERA, PCI_ANY_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, altera_cvp_id_tbl);
+
+static struct pci_driver altera_cvp_driver = {
+	.name   = DRV_NAME,
+	.id_table = altera_cvp_id_tbl,
+	.probe  = altera_cvp_probe,
+	.remove = altera_cvp_remove,
+};
+
+static int __init altera_cvp_init(void)
+{
+	return pci_register_driver(&altera_cvp_driver);
+}
+
+static void __exit altera_cvp_exit(void)
+{
+	pci_unregister_driver(&altera_cvp_driver);
+}
+
+module_init(altera_cvp_init);
+module_exit(altera_cvp_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anatolij Gustschin <agust@...x.de>");
+MODULE_DESCRIPTION("Module to load Altera FPGA over CvP");
-- 
2.7.4

Powered by blists - more mailing lists