[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170421130119.6187-4-hdegoede@redhat.com>
Date: Fri, 21 Apr 2017 15:01:18 +0200
From: Hans de Goede <hdegoede@...hat.com>
To: MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>
Cc: Hans de Goede <hdegoede@...hat.com>, linux-kernel@...r.kernel.org
Subject: [PATCH 4/5] extcon: intel-cht-wc: Add new cht_wc_extcon_set_state helper
This allows a nice cleanup of cht_wc_extcon_pwrsrc_event, getting rid
of all the gotos in there.
This also is a preparation patch for adding USB Type-C controller
monitoring.
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
drivers/extcon/extcon-intel-cht-wc.c | 54 ++++++++++++++++++------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 8806427e..684f6b2 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -196,20 +196,40 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
}
/* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
-static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
- unsigned int cable, bool state)
+static void cht_wc_extcon_set_cable_state(struct cht_wc_extcon_data *ext,
+ unsigned int cable, bool state)
{
extcon_set_state_sync(ext->edev, cable, state);
if (cable == EXTCON_CHG_USB_SDP)
extcon_set_state_sync(ext->edev, EXTCON_USB, state);
}
+static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
+ unsigned int new_cable)
+{
+ if (new_cable == EXTCON_NONE && !ext->usb_host) {
+ /* Route D+ and D- to PMIC for future charger detection */
+ cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC);
+ } else {
+ /* Route D+ and D- to SoC for the host or gadget controller */
+ cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC);
+ }
+
+ if (new_cable != ext->previous_cable) {
+ cht_wc_extcon_set_cable_state(ext, new_cable, true);
+ cht_wc_extcon_set_cable_state(ext, ext->previous_cable, false);
+ ext->previous_cable = new_cable;
+ }
+
+ extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
+}
+
static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
{
int ret, pwrsrc_sts, id;
unsigned int cable = EXTCON_NONE;
/* Ignore errors in host mode, as the 5v boost converter is on then */
- bool ignore_get_charger_errors = ext->usb_host;
+ bool ignore_get_charger_err = ext->usb_host;
ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts);
if (ret) {
@@ -218,33 +238,13 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
}
id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
- if (id == USB_ID_GND) {
- /* The 5v boost causes a false VBUS / SDP detect, skip */
- goto charger_det_done;
- }
-
- /* Plugged into a host/charger or not connected? */
- if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) {
- /* Route D+ and D- to PMIC for future charger detection */
- cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC);
- goto set_state;
- }
-
- cable = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors);
-charger_det_done:
- /* Route D+ and D- to SoC for the host or gadget controller */
- cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC);
-
-set_state:
- if (cable != ext->previous_cable) {
- cht_wc_extcon_set_state(ext, cable, true);
- cht_wc_extcon_set_state(ext, ext->previous_cable, false);
- ext->previous_cable = cable;
- }
+ /* When id == gnd the 5v boost causes a false VBUS detect */
+ if (id != USB_ID_GND && (pwrsrc_sts & CHT_WC_PWRSRC_VBUS))
+ cable = cht_wc_extcon_get_charger(ext, ignore_get_charger_err);
ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A));
- extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
+ cht_wc_extcon_set_state(ext, cable);
}
static irqreturn_t cht_wc_extcon_isr(int irq, void *data)
--
2.9.3
Powered by blists - more mailing lists