| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 Apr 2017 14:02:04 +0300
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Hans de Goede <hdegoede@...hat.com>,
Guenter Roeck <linux@...ck-us.net>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/5] extcon: Add FUSB302 USB TYPE-C controller support
+Guenter
On Fri, Apr 21, 2017 at 09:51:50PM +0300, Andy Shevchenko wrote:
> +Cc: Heikki.
>
> He might comment on this.
Thanks Andy.
> On Fri, Apr 21, 2017 at 4:01 PM, Hans de Goede <hdegoede@...hat.com> wrote:
> > Add support for USB TYPE-C cable detection on systems using a
> > FUSB302 USB TYPE-C controller.
> >
> > Signed-off-by: Hans de Goede <hdegoede@...hat.com>
> > ---
> > drivers/extcon/Kconfig | 8 +
> > drivers/extcon/Makefile | 1 +
> > drivers/extcon/extcon-fusb302.c | 782 ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 791 insertions(+)
> > create mode 100644 drivers/extcon/extcon-fusb302.c
There is now the typec class in linux-next that really needs to be
used with all USB Type-C PHYs like fusb302.
Unless I'm mistaken, Guenter has also written a driver for fusb302. I
have not seen it, but if I understood correctly, that driver will
register itself with the upcoming tcpm (USB Type-C Port Manager) [1],
which in practice would mean we can take properly advantage of the USB
PD transceiver on fusb302.
Guenter! Can you publish the fusb302 driver?
[1] https://chromium-review.googlesource.com/c/389916/
> > diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
> > index 32f2dc8..562db5b 100644
> > --- a/drivers/extcon/Kconfig
> > +++ b/drivers/extcon/Kconfig
> > @@ -35,6 +35,14 @@ config EXTCON_AXP288
> > Say Y here to enable support for USB peripheral detection
> > and USB MUX switching by X-Power AXP288 PMIC.
> >
> > +config EXTCON_FUSB302
> > + tristate "FUSB302 USB TYPE-C controller support"
> > + depends on I2C
> > + select REGMAP_I2C
> > + help
> > + Say Y here to enable support for USB TYPE-C cable detection using
> > + a FUSB302 USB TYPE-C controller.
> > +
> > config EXTCON_GPIO
> > tristate "GPIO extcon support"
> > depends on GPIOLIB || COMPILE_TEST
> > diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
> > index ecfa958..e5eb493 100644
> > --- a/drivers/extcon/Makefile
> > +++ b/drivers/extcon/Makefile
> > @@ -7,6 +7,7 @@ extcon-core-objs += extcon.o devres.o
> > obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
> > obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
> > obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o
> > +obj-$(CONFIG_EXTCON_FUSB302) += extcon-fusb302.o
> > obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
> > obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o
> > obj-$(CONFIG_EXTCON_INTEL_CHT_WC) += extcon-intel-cht-wc.o
> > diff --git a/drivers/extcon/extcon-fusb302.c b/drivers/extcon/extcon-fusb302.c
> > new file mode 100644
> > index 0000000..577adb9
> > --- /dev/null
> > +++ b/drivers/extcon/extcon-fusb302.c
> > @@ -0,0 +1,782 @@
> > +/*
> > + * Extcon USB-C cable detection driver for FUSB302 USB TYPE-C controller
> > + *
> > + * Copyright (C) 2017 Hans de Goede <hdegoede@...hat.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/extcon.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +#include <linux/workqueue.h>
> > +#include "extcon.h"
> > +
> > +#define REG_DEVICE_ID 0x01
> > +#define DEVICE_ID_VER_MASK GENMASK(7, 4)
> > +#define DEVICE_ID_FUSB302_VER 0x80
> > +
> > +#define REG_SWITCHES0 0x02
> > +#define SWITCHES0_PDWN1 BIT(0)
> > +#define SWITCHES0_PDWN2 BIT(1)
> > +#define SWITCHES0_PDWN GENMASK(1, 0)
> > +#define SWITCHES0_MEAS_CC1 BIT(2)
> > +#define SWITCHES0_MEAS_CC2 BIT(3)
> > +#define SWITCHES0_VCONN_CC1 BIT(4)
> > +#define SWITCHES0_VCONN_CC2 BIT(5)
> > +#define SWITCHES0_PU_EN1 BIT(6)
> > +#define SWITCHES0_PU_EN2 BIT(7)
> > +
> > +#define REG_MEASURE 0x04
> > +#define MEASURE_MDAC_MASK GENMASK(5, 0)
> > +/* Datasheet says MDAC must be set to 0x34 / 2226mV for vRd-3.0 detection */
> > +#define MEASURE_MDAC_SNK_VRD30 0x34
> > +/* MDAC must be set to 0x25 / 1600mV for disconnect det. with 80uA host-cur */
> > +#define MEASURE_MDAC_SRC_80UA_HOST_CUR 0x25
> > +
> > +#define REG_CONTROL0 0x06
> > +#define CONTROL0_HOST_CUR_MASK GENMASK(3, 2)
> > +#define CONTROL0_HOST_CUR_DISABLED (0 << 2)
> > +#define CONTROL0_HOST_CUR_80UA (1 << 2)
> > +#define CONTROL0_HOST_CUR_180UA (2 << 2)
> > +#define CONTROL0_HOST_CUR_330UA (3 << 2)
> > +#define CONTROL0_INT_MASK BIT(5)
> > +
> > +#define REG_CONTROL2 0x08
> > +#define CONTROL2_TOGGLE BIT(0)
> > +#define CONTROL2_MODE_MASK GENMASK(2, 1)
> > +#define CONTROL2_MODE_DRP (1 << 1)
> > +#define CONTROL2_MODE_SNK (2 << 1)
> > +#define CONTROL2_MODE_SRC (3 << 1)
> > +#define CONTROL2_SAVE_PWR_MASK GENMASK(7, 6)
> > +#define CONTROL2_SAVE_PWR_DISABLED (0 << 6)
> > +#define CONTROL2_SAVE_PWR_40MS (1 << 6)
> > +#define CONTROL2_SAVE_PWR_80MS (2 << 6)
> > +#define CONTROL2_SAVE_PWR_160MS (3 << 6)
> > +
> > +#define REG_MASK1 0x0a
> > +/* REG_MASK1 value for low-power / disabled state from datasheet */
> > +#define MASK1_DISABLED 0xfe
> > +#define MASK1_COMP_CHNG BIT(5)
> > +#define MASK1_VBUSOK BIT(7)
> > +
> > +#define REG_POWER 0x0b
> > +/* REG_POWER values for disabled and normal state from datasheet */
> > +#define POWER_DISABLED BIT(0)
> > +#define POWER_NORMAL GENMASK(2, 0)
> > +
> > +#define REG_RESET 0x0c
> > +#define RESET_SW_RESET BIT(0)
> > +
> > +#define REG_OCP 0x0d
> > +
> > +#define REG_MASKA 0x0e
> > +/* REG_MASKA value for low-power / disabled state from datasheet */
> > +#define MASKA_DISABLED 0xbf
> > +
> > +#define REG_MASKB 0x0f
> > +/* REG_MASKB value for low-power / disabled state from datasheet */
> > +#define MASKB_DISABLED 0x01
> > +
> > +#define REG_STATUS1A 0x3d
> > +#define STATUS1A_TOGSS_MASK GENMASK(5, 3)
> > +#define STATUS1A_TOGSS_SRC_CC1 (1 << 3)
> > +#define STATUS1A_TOGSS_SRC_CC2 (2 << 3)
> > +#define STATUS1A_TOGSS_SNK_CC1 (5 << 3)
> > +#define STATUS1A_TOGSS_SNK_CC2 (6 << 3)
> > +
> > +#define REG_INTERRUPTA 0x3e
> > +#define INTERRUPTA_TOGDONE BIT(6)
> > +
> > +#define REG_STATUS0 0x40
> > +#define STATUS0_BC_LEVEL_MASK GENMASK(1, 0)
> > +#define STATUS0_BC_LEVEL_VRA 0
> > +#define STATUS0_BC_LEVEL_VRDUSB 1
> > +#define STATUS0_BC_LEVEL_VRD15 2
> > +#define STATUS0_BC_LEVEL_VRD30 3
> > +#define STATUS0_COMP BIT(5)
> > +#define STATUS0_VBUSOK BIT(7)
> > +
> > +#define REG_INTERRUPT 0x42
> > +#define INTERRUPT_BC_LVL BIT(0)
> > +#define INTERRUPT_COMP_CHNG BIT(5)
> > +#define INTERRUPT_VBUSOK BIT(7)
> > +
> > +/* Timeouts from the FUSB302 datasheet */
> > +#define TTOGCYCLE msecs_to_jiffies(40 + 60 + 40)
> > +
> > +/* Timeouts from the USB-C specification */
> > +#define TPDDEBOUNCE msecs_to_jiffies(20)
> > +#define TDRPTRY_MS 75
> > +#define TDRPTRY msecs_to_jiffies(TDRPTRY_MS)
> > +#define TDRPTRYWAIT msecs_to_jiffies(400)
> > +#define TVBUSON msecs_to_jiffies(275)
> > +
> > +enum typec_port_type {
> > + TYPEC_PORT_DFP,
> > + TYPEC_PORT_UFP,
> > + TYPEC_PORT_DRP,
> > +};
> > +
> > +enum typec_role {
> > + TYPEC_SINK,
> > + TYPEC_SOURCE,
> > +};
> > +
> > +enum fusb302_state {
> > + DISABLED_SNK, /* UFP */
> > + DISABLED_SRC, /* DFP */
> > + DISABLED_DRP,
> > + UNATTACHED_SNK,
> > + ATTACHED_SNK,
> > + UNATTACHED_SRC,
> > + ATTACHED_SRC,
> > +};
> > +/* For debugging */
> > +static __maybe_unused const char *fusb302_state_str[] = {
> > + "DISABLED_SNK",
> > + "DISABLED_SRC",
> > + "DISABLED_DRP",
> > + "UNATTACHED_SNK",
> > + "ATTACHED_SNK",
> > + "UNATTACHED_SRC",
> > + "ATTACHED_SRC",
> > +};
> > +
> > +enum fusb302_event {
> > + TOGGLE_DONE,
> > + BC_LVL_CHANGE,
> > + VBUS_VALID,
> > + VBUS_INVALID,
> > + COMP_LOW,
> > + COMP_HIGH,
> > + TIMEOUT,
> > + FALLBACK_TIMEOUT,
> > +};
> > +/* For debugging */
> > +static __maybe_unused const char *fusb302_event_str[] = {
> > + "TOGGLE_DONE",
> > + "BC_LVL_CHANGE",
> > + "VBUS_VALID",
> > + "VBUS_INVALID",
> > + "COMP_LOW",
> > + "COMP_HIGH",
> > + "TIMEOUT",
> > + "FALLBACK_TIMEOUT",
> > +};
> > +
> > +static const unsigned int fusb302_extcon_cables[] = {
> > + EXTCON_USB,
> > + EXTCON_USB_HOST,
> > + EXTCON_CHG_USB_SDP,
> > + EXTCON_CHG_USB_CDP,
> > + EXTCON_CHG_USB_FAST,
> > + EXTCON_NONE,
> > +};
> > +
> > +struct fusb302_data {
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct extcon_dev *edev;
> > + struct mutex lock;
> > + struct delayed_work timeout;
> > + struct delayed_work fallback_timeout;
> > + struct delayed_work bc_work;
> > + enum fusb302_state state;
> > + enum typec_port_type port_type;
> > + enum typec_role preferred_role;
> > + int status0;
> > + int status1a;
> > + unsigned int snk_cable_id;
> > +};
> > +
> > +static void fusb302_write_reg(struct fusb302_data *data, int reg, int val)
> > +{
> > + int ret;
> > +
> > + ret = regmap_write(data->regmap, reg, val);
> > + if (ret)
> > + dev_err(data->dev, "Error writing reg %02x: %d\n", reg, ret);
> > +}
> > +
> > +static int fusb302_read_reg(struct fusb302_data *data, int reg)
> > +{
> > + int ret, val;
> > +
> > + ret = regmap_read(data->regmap, reg, &val);
> > + if (ret) {
> > + dev_err(data->dev, "Error reading reg %02x: %d\n", reg, ret);
> > + return 0;
> > + }
> > +
> > + return val;
> > +}
> > +
> > +static void fusb302_update_bits(struct fusb302_data *data, int reg,
> > + int mask, int val)
> > +{
> > + int ret;
> > +
> > + ret = regmap_update_bits(data->regmap, reg, mask, val);
> > + if (ret)
> > + dev_err(data->dev, "Error modifying reg %02x: %d\n", reg, ret);
> > +}
> > +
> > +/* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
> > +static void fusb302_set_extcon_state(struct fusb302_data *data,
> > + unsigned int cable, bool state)
> > +{
> > + extcon_set_state_sync(data->edev, cable, state);
> > + if (cable == EXTCON_CHG_USB_SDP)
> > + extcon_set_state_sync(data->edev, EXTCON_USB, state);
> > +}
> > +
> > +/* Helper for the disabled states */
> > +static void fusb302_disable(struct fusb302_data *data)
> > +{
> > + fusb302_write_reg(data, REG_POWER, POWER_DISABLED);
> > + fusb302_write_reg(data, REG_MASK1, MASK1_DISABLED);
> > + fusb302_write_reg(data, REG_MASKA, MASKA_DISABLED);
> > + fusb302_write_reg(data, REG_MASKB, MASKB_DISABLED);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_TOGGLE, 0);
> > +}
> > +
> > +/*
> > + * fusb302_set_state() and fusb302_handle_event() implement the 3 state
> > + * machines from the datasheet folded into 1 state-machine for code re-use.
> > + */
> > +static void fusb302_set_state(struct fusb302_data *data,
> > + enum fusb302_state state)
> > +{
> > + int status, switches0 = 0;
> > + enum fusb302_state old_state = data->state;
> > + union extcon_property_value prop;
> > +
> > + /* Kill pending timeouts from previous state */
> > + cancel_delayed_work(&data->timeout);
> > + cancel_delayed_work(&data->fallback_timeout);
> > + cancel_delayed_work(&data->bc_work);
> > +
> > + dev_dbg(data->dev, "New state %s\n", fusb302_state_str[state]);
> > +
> > + switch (old_state) {
> > + case ATTACHED_SNK:
> > + fusb302_set_extcon_state(data, data->snk_cable_id, false);
> > + break;
> > + case ATTACHED_SRC:
> > + fusb302_set_extcon_state(data, EXTCON_USB_HOST, false);
> > + break;
> > + default:
> > + break; /* Do nothing */
> > + }
> > +
> > + switch (state) {
> > + case DISABLED_SNK:
> > + fusb302_disable(data);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_MODE_MASK,
> > + CONTROL2_MODE_SNK);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_TOGGLE,
> > + CONTROL2_TOGGLE);
> > + break;
> > +
> > + case DISABLED_SRC:
> > + fusb302_disable(data);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_MODE_MASK,
> > + CONTROL2_MODE_SRC);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_TOGGLE,
> > + CONTROL2_TOGGLE);
> > + break;
> > +
> > + case DISABLED_DRP:
> > + fusb302_disable(data);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_MODE_MASK,
> > + CONTROL2_MODE_DRP);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_TOGGLE,
> > + CONTROL2_TOGGLE);
> > + break;
> > +
> > + case UNATTACHED_SNK:
> > + fusb302_write_reg(data, REG_POWER, POWER_NORMAL);
> > +
> > + /* Enable pull-down on CC1 / CC2 based on orientation */
> > + switch (data->status1a & STATUS1A_TOGSS_MASK) {
> > + case STATUS1A_TOGSS_SNK_CC1:
> > + switches0 = SWITCHES0_PDWN1 | SWITCHES0_MEAS_CC1;
> > + prop.intval = USB_TYPEC_POLARITY_NORMAL;
> > + break;
> > + case STATUS1A_TOGSS_SNK_CC2:
> > + switches0 = SWITCHES0_PDWN2 | SWITCHES0_MEAS_CC2;
> > + prop.intval = USB_TYPEC_POLARITY_FLIP;
> > + break;
> > + }
> > + fusb302_write_reg(data, REG_SWITCHES0, switches0);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_TOGGLE, 0);
> > + extcon_set_property(data->edev, EXTCON_USB,
> > + EXTCON_PROP_USB_TYPEC_POLARITY, prop);
> > +
> > + /* Enable VBUSOK and COMP irq at 2.24V for BC detection */
> > + fusb302_update_bits(data, REG_MASK1,
> > + MASK1_VBUSOK | MASK1_COMP_CHNG, 0);
> > + fusb302_update_bits(data, REG_MEASURE, MEASURE_MDAC_MASK,
> > + MEASURE_MDAC_SNK_VRD30);
> > +
> > + status = fusb302_read_reg(data, REG_STATUS0);
> > + if (status & STATUS0_VBUSOK) {
> > + /* Go straight to ATTACHED_SNK */
> > + fusb302_set_state(data, ATTACHED_SNK);
> > + return;
> > + }
> > +
> > + mod_delayed_work(system_wq, &data->timeout, TVBUSON);
> > + break;
> > +
> > + case ATTACHED_SNK:
> > + mod_delayed_work(system_wq, &data->bc_work, TPDDEBOUNCE);
> > + break;
> > +
> > + case UNATTACHED_SRC:
> > + fusb302_write_reg(data, REG_POWER, POWER_NORMAL);
> > +
> > + /* Enable pull-up / Vconn on CC1 / CC2 based on orientation */
> > + switch (data->status1a & STATUS1A_TOGSS_MASK) {
> > + case STATUS1A_TOGSS_SRC_CC1:
> > + switches0 = SWITCHES0_PU_EN1 | SWITCHES0_VCONN_CC2 |
> > + SWITCHES0_MEAS_CC1;
> > + prop.intval = USB_TYPEC_POLARITY_NORMAL;
> > + break;
> > + case STATUS1A_TOGSS_SRC_CC2:
> > + switches0 = SWITCHES0_PU_EN2 | SWITCHES0_VCONN_CC1 |
> > + SWITCHES0_MEAS_CC2;
> > + prop.intval = USB_TYPEC_POLARITY_FLIP;
> > + break;
> > + }
> > + fusb302_write_reg(data, REG_SWITCHES0, switches0);
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_TOGGLE, 0);
> > + extcon_set_property(data->edev, EXTCON_USB,
> > + EXTCON_PROP_USB_TYPEC_POLARITY, prop);
> > +
> > + /* Enable COMP irq at 1.6V for detach detection */
> > + fusb302_update_bits(data, REG_MASK1, MASK1_COMP_CHNG, 0);
> > + fusb302_update_bits(data, REG_MEASURE, MEASURE_MDAC_MASK,
> > + MEASURE_MDAC_SRC_80UA_HOST_CUR);
> > +
> > + status = fusb302_read_reg(data, REG_STATUS0);
> > + if (!(status & STATUS0_COMP)) {
> > + /* Go straight to ATTACHED_SRC */
> > + fusb302_set_state(data, ATTACHED_SRC);
> > + return;
> > + }
> > +
> > + mod_delayed_work(system_wq, &data->timeout, TPDDEBOUNCE);
> > + break;
> > +
> > + case ATTACHED_SRC:
> > + fusb302_set_extcon_state(data, EXTCON_USB_HOST, true);
> > + break;
> > + }
> > +
> > + data->state = state;
> > +}
> > +
> > +static void fusb302_set_state_disabled(struct fusb302_data *data)
> > +{
> > +
> > + switch (data->port_type) {
> > + case TYPEC_PORT_UFP:
> > + fusb302_set_state(data, DISABLED_SNK);
> > + break;
> > + case TYPEC_PORT_DFP:
> > + fusb302_set_state(data, DISABLED_SRC);
> > + break;
> > + case TYPEC_PORT_DRP:
> > + fusb302_set_state(data, DISABLED_DRP);
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_disabled_snk_event(struct fusb302_data *data,
> > + int event)
> > +{
> > + switch (event) {
> > + case TOGGLE_DONE:
> > + switch (data->status1a & STATUS1A_TOGSS_MASK) {
> > + case STATUS1A_TOGSS_SNK_CC1:
> > + case STATUS1A_TOGSS_SNK_CC2:
> > + fusb302_set_state(data, UNATTACHED_SNK);
> > + break;
> > + }
> > + break;
> > +
> > + case TIMEOUT:
> > + /* Cannot become snk fallback to src */
> > + fusb302_set_state(data, DISABLED_SRC);
> > + mod_delayed_work(system_wq, &data->fallback_timeout,
> > + TDRPTRYWAIT);
> > + break;
> > +
> > + case FALLBACK_TIMEOUT:
> > + /* Both states failed return to disabled drp state */
> > + fusb302_set_state(data, DISABLED_DRP);
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_disabled_src_event(struct fusb302_data *data,
> > + int event)
> > +{
> > + switch (event) {
> > + case TOGGLE_DONE:
> > + switch (data->status1a & STATUS1A_TOGSS_MASK) {
> > + case STATUS1A_TOGSS_SRC_CC1:
> > + case STATUS1A_TOGSS_SRC_CC2:
> > + fusb302_set_state(data, UNATTACHED_SRC);
> > + break;
> > + }
> > + break;
> > +
> > + case TIMEOUT:
> > + /* Cannot become src fallback to snk */
> > + fusb302_set_state(data, DISABLED_SNK);
> > + mod_delayed_work(system_wq, &data->fallback_timeout,
> > + TDRPTRYWAIT);
> > + break;
> > +
> > + case FALLBACK_TIMEOUT:
> > + /* Both states failed return to disabled drp state */
> > + fusb302_set_state(data, DISABLED_DRP);
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_disabled_drp_event(struct fusb302_data *data,
> > + int event)
> > +{
> > + switch (event) {
> > + case TOGGLE_DONE:
> > + switch (data->status1a & STATUS1A_TOGSS_MASK) {
> > + case STATUS1A_TOGSS_SNK_CC1:
> > + case STATUS1A_TOGSS_SNK_CC2:
> > + if (data->preferred_role == TYPEC_SINK) {
> > + /* Jump directly to UNATTACHED_SNK */
> > + fusb302_set_state(data, UNATTACHED_SNK);
> > + } else {
> > + /* Try to become src */
> > + fusb302_set_state(data, DISABLED_SNK);
> > + mod_delayed_work(system_wq, &data->timeout,
> > + TDRPTRY);
> > + }
> > + break;
> > + case STATUS1A_TOGSS_SRC_CC1:
> > + case STATUS1A_TOGSS_SRC_CC2:
> > + if (data->preferred_role == TYPEC_SOURCE) {
> > + /* Jump directly to UNATTACHED_SRC */
> > + fusb302_set_state(data, UNATTACHED_SRC);
> > + } else {
> > + /*
> > + * The USB-C spec says we must enable pull-downs
> > + * and then wait tDRPTry before checking to
> > + * avoid endless role-bouncing if both ends
> > + * prefer the snk role.
> > + */
> > + fusb302_write_reg(data, REG_SWITCHES0,
> > + SWITCHES0_PDWN);
> > + fusb302_update_bits(data, REG_CONTROL2,
> > + CONTROL2_TOGGLE, 0);
> > + msleep(TDRPTRY_MS);
> > + /*
> > + * Use the toggle engine to do the src
> > + * detection to keep things the same as for
> > + * directly entering the src role.
> > + */
> > + fusb302_set_state(data, DISABLED_SNK);
> > + mod_delayed_work(system_wq, &data->timeout,
> > + TTOGCYCLE);
> > + }
> > + break;
> > + }
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_unattached_snk_event(struct fusb302_data *data,
> > + int event)
> > +{
> > + switch (event) {
> > + case VBUS_VALID: /* Cable attached */
> > + fusb302_set_state(data, ATTACHED_SNK);
> > + break;
> > + case TIMEOUT:
> > + fusb302_set_state_disabled(data);
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_attached_snk_event(struct fusb302_data *data,
> > + int event)
> > +{
> > + switch (event) {
> > + case BC_LVL_CHANGE:
> > + case COMP_LOW:
> > + case COMP_HIGH:
> > + mod_delayed_work(system_wq, &data->bc_work, TPDDEBOUNCE);
> > + break;
> > + case VBUS_INVALID: /* Cable detached */
> > + fusb302_set_state_disabled(data);
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_unattached_src_event(struct fusb302_data *data,
> > + int event)
> > +{
> > + switch (event) {
> > + case COMP_LOW: /* Cable attached */
> > + fusb302_set_state(data, ATTACHED_SRC);
> > + break;
> > + case TIMEOUT:
> > + fusb302_set_state_disabled(data);
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_attached_src_event(struct fusb302_data *data,
> > + int event)
> > +{
> > + switch (event) {
> > + case COMP_HIGH: /* Cable detached */
> > + fusb302_set_state_disabled(data);
> > + break;
> > + }
> > +}
> > +
> > +static void fusb302_handle_event(struct fusb302_data *data, int event)
> > +{
> > +
> > + mutex_lock(&data->lock);
> > +
> > + dev_dbg(data->dev, "Handling state %s event %s status %02x %02x\n",
> > + fusb302_state_str[data->state], fusb302_event_str[event],
> > + fusb302_read_reg(data, REG_STATUS0),
> > + fusb302_read_reg(data, REG_STATUS1A));
> > +
> > + switch (data->state) {
> > + case DISABLED_SNK:
> > + fusb302_handle_disabled_snk_event(data, event);
> > + break;
> > + case DISABLED_SRC:
> > + fusb302_handle_disabled_src_event(data, event);
> > + break;
> > + case DISABLED_DRP:
> > + fusb302_handle_disabled_drp_event(data, event);
> > + break;
> > + case UNATTACHED_SNK:
> > + fusb302_handle_unattached_snk_event(data, event);
> > + break;
> > + case ATTACHED_SNK:
> > + fusb302_handle_attached_snk_event(data, event);
> > + break;
> > + case UNATTACHED_SRC:
> > + fusb302_handle_unattached_src_event(data, event);
> > + break;
> > + case ATTACHED_SRC:
> > + fusb302_handle_attached_src_event(data, event);
> > + break;
> > + }
> > + mutex_unlock(&data->lock);
> > +}
> > +
> > +static void fusb302_timeout(struct work_struct *work)
> > +{
> > + struct fusb302_data *data =
> > + container_of(work, struct fusb302_data, timeout.work);
> > +
> > + fusb302_handle_event(data, TIMEOUT);
> > +}
> > +
> > +static void fusb302_fallback_timeout(struct work_struct *work)
> > +{
> > + struct fusb302_data *data =
> > + container_of(work, struct fusb302_data, fallback_timeout.work);
> > +
> > + fusb302_handle_event(data, FALLBACK_TIMEOUT);
> > +}
> > +
> > +static void fusb302_report_bc_level(struct work_struct *work)
> > +{
> > + struct fusb302_data *data =
> > + container_of(work, struct fusb302_data, bc_work.work);
> > +
> > + /* Clear old charger cable id */
> > + fusb302_set_extcon_state(data, data->snk_cable_id, false);
> > +
> > + if (data->status0 & STATUS0_COMP) {
> > + dev_warn(data->dev, "vRd over maximum, assuming 500mA source\n");
> > + data->snk_cable_id = EXTCON_CHG_USB_SDP;
> > + } else {
> > + switch (data->status0 & STATUS0_BC_LEVEL_MASK) {
> > + case STATUS0_BC_LEVEL_VRA:
> > + case STATUS0_BC_LEVEL_VRDUSB:
> > + data->snk_cable_id = EXTCON_CHG_USB_SDP;
> > + break;
> > + case STATUS0_BC_LEVEL_VRD15:
> > + data->snk_cable_id = EXTCON_CHG_USB_CDP;
> > + break;
> > + case STATUS0_BC_LEVEL_VRD30:
> > + /* Use CHG_USB_FAST to indicate 3A capability */
> > + data->snk_cable_id = EXTCON_CHG_USB_FAST;
> > + break;
> > + }
> > + }
> > + fusb302_set_extcon_state(data, data->snk_cable_id, true);
> > +}
> > +
> > +static irqreturn_t fusb302_irq_handler_thread(int irq, void *handler_data)
> > +{
> > + struct fusb302_data *data = handler_data;
> > + int interrupt, interrupta;
> > +
> > + interrupt = fusb302_read_reg(data, REG_INTERRUPT);
> > + interrupta = fusb302_read_reg(data, REG_INTERRUPTA);
> > +
> > + if (interrupt)
> > + data->status0 = fusb302_read_reg(data, REG_STATUS0);
> > +
> > + if (interrupta)
> > + data->status1a = fusb302_read_reg(data, REG_STATUS1A);
> > +
> > + dev_dbg(data->dev, "Handling interrupt %02x %02x status %02x %02x\n",
> > + interrupt, interrupta, data->status0, data->status1a);
> > +
> > + if (interrupt & INTERRUPT_BC_LVL)
> > + fusb302_handle_event(data, BC_LVL_CHANGE);
> > +
> > + if (interrupt & INTERRUPT_COMP_CHNG) {
> > + if (data->status0 & STATUS0_COMP)
> > + fusb302_handle_event(data, COMP_HIGH);
> > + else
> > + fusb302_handle_event(data, COMP_LOW);
> > + }
> > +
> > + if (interrupt & INTERRUPT_VBUSOK) {
> > + if (data->status0 & STATUS0_VBUSOK)
> > + fusb302_handle_event(data, VBUS_VALID);
> > + else
> > + fusb302_handle_event(data, VBUS_INVALID);
> > + }
> > +
> > + if (interrupta & INTERRUPTA_TOGDONE)
> > + fusb302_handle_event(data, TOGGLE_DONE);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static const struct regmap_config fusb302_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .val_format_endian = REGMAP_ENDIAN_NATIVE,
> > +};
> > +
> > +static int fusb302_probe(struct i2c_client *client)
> > +{
> > + struct device *dev = &client->dev;
> > + struct fusb302_data *data;
> > + int ret;
> > +
> > + if (!client->irq) {
> > + dev_err(dev, "Error irq not specified\n");
> > + return -EINVAL;
> > + }
> > +
> > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + data->dev = dev;
> > + /* TODO make these 2 configurable using device-properties */
> > + data->port_type = TYPEC_PORT_DRP;
> > + data->preferred_role = TYPEC_SINK;
> > +
> > + data->regmap = devm_regmap_init_i2c(client, &fusb302_regmap_config);
> > + if (IS_ERR(data->regmap)) {
> > + ret = PTR_ERR(data->regmap);
> > + dev_err(dev, "Error to initializing regmap: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + mutex_init(&data->lock);
> > + INIT_DELAYED_WORK(&data->timeout, fusb302_timeout);
> > + INIT_DELAYED_WORK(&data->fallback_timeout, fusb302_fallback_timeout);
> > + INIT_DELAYED_WORK(&data->bc_work, fusb302_report_bc_level);
> > +
> > + data->edev = devm_extcon_dev_allocate(dev, fusb302_extcon_cables);
> > + if (IS_ERR(data->edev))
> > + return PTR_ERR(data->edev);
> > +
> > + data->edev->name = "fusb302";
> > +
> > + ret = devm_extcon_dev_register(dev, data->edev);
> > + if (ret)
> > + return ret;
> > +
> > + extcon_set_property_capability(data->edev, EXTCON_USB,
> > + EXTCON_PROP_USB_TYPEC_POLARITY);
> > +
> > + fusb302_write_reg(data, REG_RESET, RESET_SW_RESET);
> > + usleep_range(10000, 20000);
> > +
> > + /* Enable power-saving */
> > + fusb302_update_bits(data, REG_CONTROL2, CONTROL2_SAVE_PWR_MASK,
> > + CONTROL2_SAVE_PWR_40MS);
> > +
> > + fusb302_set_state_disabled(data);
> > +
> > + ret = devm_request_threaded_irq(dev, client->irq, NULL,
> > + fusb302_irq_handler_thread,
> > + IRQF_TRIGGER_LOW | IRQF_ONESHOT, "fusb302", data);
> > + if (ret) {
> > + dev_err(dev, "Error requesting irq: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + fusb302_update_bits(data, REG_CONTROL0, CONTROL0_INT_MASK, 0);
> > +
> > + i2c_set_clientdata(client, data);
> > + return 0;
> > +}
> > +
> > +static int fusb302_remove(struct i2c_client *client)
> > +{
> > + struct fusb302_data *data = i2c_get_clientdata(client);
> > +
> > + devm_free_irq(data->dev, client->irq, data);
> > + cancel_delayed_work_sync(&data->timeout);
> > + cancel_delayed_work_sync(&data->fallback_timeout);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id fusb302_i2c_ids[] = {
> > + { "fusb302" },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(i2c, fusb302_i2c_ids);
> > +
> > +static struct i2c_driver fusb302_driver = {
> > + .probe_new = fusb302_probe,
> > + .remove = fusb302_remove,
> > + .id_table = fusb302_i2c_ids,
> > + .driver = {
> > + .name = "fusb302",
> > + },
> > +};
> > +module_i2c_driver(fusb302_driver);
> > +
> > +MODULE_LICENSE("GPL");
> > +MODULE_AUTHOR("Hans de Goede <hdegoede@...hat.com>");
> > +MODULE_DESCRIPTION("FUSB302 USB TYPE-C controller Driver");
> > --
> > 2.9.3
> >
Br,
--
heikki
Powered by blists - more mailing lists